초록
내진 보강용 이력 댐퍼로 활용하기 위해 개발된 좌굴방지가새는 일본과 미국을 중심으로 활발히 연구되어 왔다. 좌굴방지가새는 일반적으로 심재와 외피 사이를 콘크리트 등으로 채워 제작된다. 좌굴방지가새에 콘크리트를 채우는 일은 습식 공정으로 제작 효율을 떨어뜨릴 수 있는 하나의 원인으로 심재와 콘크리트의 비부착 처리는 쉽지 않은 작업이다. 이를 개선하기 위해 반원형 스프링으로 심재를 횡지지하는 건식형 좌굴방지가새를 제안하였다. 건식형 좌굴방지가새를 실용화하기 위해 적절한 거동을 갖는 반원형 스프링의 형상을 해석적으로 조사하였다. 심재가 압축을 받아 고차모드로 좌굴하기 위해 필요로 하는 횡지지 강성과 강도를 이론적으로 평가하였다. 또한 실제 적용 조건을 반영하여 반원형 스프링의 실용적 소요강성와 강도를 계산하였다. 이 값을 기준으로 5가지 높이를 변수로 한 반원형 스프링의 비선형 좌굴해석을 통해 적절한 강종과 두께를 선정하였다. 끝으로 최종 선정된 반원형 스프링의 거동을 반영하여 이차원으로 모델링한 건식형 좌굴방지가새의 비선형 좌굴해석을 통해 건식형 좌굴방지가새의 좌굴강도는 반원형 스프링 사이의 거리를 좌굴 길이로 갖는 심재의 좌굴하중과 유사함을 확인하였다.
Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.