DOI QR코드

DOI QR Code

Finite-element modeling of a light-framed wood roof structure

  • Jacklin, Ryan B. (Department of Civil and Environmental Engineering, The University of Western Ontario) ;
  • El Damatty, Ashraf A. (Department of Civil and Environmental Engineering, The University of Western Ontario, London) ;
  • Dessouki, Ahmed A. (Department of Civil and Environmental Engineering, The University of Western Ontario, London)
  • 투고 : 2014.03.15
  • 심사 : 2014.10.08
  • 발행 : 2014.12.25

초록

Past high speed wind events have exposed the vulnerability of the roof systems of existing light-framed wood structures to uplift loading, contributing greatly to economic and human loss. This paper further investigates the behaviour of light-framed wood structures under the uplift loading of a realistic pressure distribution. A three-dimensional finite-element model is first developed to capture the behaviour of a recently completed full-scale experiment. After describing the components used to develop the numerical model, a comparison between the numerical prediction and experimental results in terms of the deflected shape at the roof-to-wall connections is presented to gain confidence in the numerical model. The model is then used to analyze the behaviour of the truss system under realistic and equivalent uniform pressure distributions and to perform an assessment of the use of the tributary area method to calculate the withdrawal force acting on the roof-to-wall connections.

키워드

과제정보

연구 과제 주관 기관 : Natural Science and Engineering Research Council of Canada (NSERC), M. A. Steelcon Engineering Limited

참고문헌

  1. Baskaran, A. and Dutt, O. (1997), "Performance of roof fasteners under simulated loading conditions", J. Wind Eng. Ind. Aerod., 72, 389-400. https://doi.org/10.1016/S0167-6105(97)00256-0
  2. Canadian Wood Council (CWC) and Canadian Standards Association (CSA) (2010), Wood Design Manual, 2010 :The Complete Reference For Wood Design In Canada, Canadian Wood Council, Ottawa, Ontario, Canada.
  3. Computers and Structures, Inc. (2009), SAP 2000 V. 14: Integrated Software for Structural Analysis and Design, Berkley, California, USA.
  4. Datin, P.L. and Prevatt, D.O. (2013), "Using instrumented small-scale models to study structural load paths in wood-framed buildings", Eng. Struct., 54, 47-56. https://doi.org/10.1016/j.engstruct.2013.03.039
  5. Datin, P.L., Prevatt, D.O. and Pang, W. (2011), "Wind-uplift capacity of residential wood roof-sheathing panels retrofitted with insulating foam adhesive", J. Architect. Eng., 17(4), 144-154. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000034
  6. Department of Housing and Urban Development (HUD) (1993), Assessment Of Damage To Single-Family Homes Caused By Hurricanes Andrew And Iniki, Office of Policy and Development and Research, United States.
  7. FEMA (1993), Building Performance: Hurricane InikiIn Hawaii - Observations, Recommendations, And Technical Guidance, Federal Emergency Management Agency, United States.
  8. Gurley, K., Davis, R.H., Ferrera, S.P., Burton, J., Masters, F., Reinhold, T. and Abdullah, M. (2006), "Post 2004 hurricane field survey - an evaluation of the relative performance of the Standard Building Code and the Florida Building Code", Proceedings of the 2006 ASCE/SEIStructures Congress, St. Louis, May.
  9. Li, Z., Gupta, R. and Miller, T.H. (1998), "Practical approach to modeling of wood truss roof assemblies", Practice Periodical Struct. Des. Constr., 3(3), 119-124. https://doi.org/10.1061/(ASCE)1084-0680(1998)3:3(119)
  10. Morrison, M.J. (2010), Response of a two-story residential house under realistic fluctuating wind loads, Ph.D. Dissertation, The University of Western Ontario, London, Ontario, Canada.
  11. Morrison, M.J., Henderson, D.J. and Kopp, G.A. (2012), "The response of a wood-frame, gable roof to fluctuating wind loads", Eng. Struct., 41, 498-509. https://doi.org/10.1016/j.engstruct.2012.04.002
  12. Morrison, M.J. and Kopp, G.A. (2011), "Performance of toe-nail connections under realistic wind loading", Eng. Struct., 33(1), 69-76. https://doi.org/10.1016/j.engstruct.2010.09.019
  13. National Research Council of Canada (NRC) (2010), National Building Code Of Canada 2010, National Research Council of Canada, Ottawa, Ontario, Canada.
  14. Ontario Building Code (2006), Toronto, Ont.
  15. Reed, T.D., Rosowsky, D.V. and Schiff, S.D. (1997), "Uplift capacity of light-frame rafter to top plate connections", J. Architect. Eng., 3(4), 156-163. https://doi.org/10.1061/(ASCE)1076-0431(1997)3:4(156)
  16. Shanmugam, B., Nielson, B.G. and Prevatt, D.O. (2009), "Statistical and analytical models for roof components in existing light-framed wood structures", Eng. Struct., 31(11), 2607-2616. https://doi.org/10.1016/j.engstruct.2009.06.009
  17. Shivarudrappa, R. and Nielson, B.G. (2013), "Sensitivity of load distribution in light-framed wood roof systems due to typical modeling parameters", J. Perform. Constr. Fac., 27(3), 222-234. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000323
  18. van de Lindt, J., Graettinger, A., Gupta, R., Skaggs, T., Pryor, S. and Fridley, K. (2007), "Performance of wood-frame structures during Hurricane Katrina", J. Perform. Constr. Fac., 21(2), 108-116. https://doi.org/10.1061/(ASCE)0887-3828(2007)21:2(108)
  19. Zisis, I. and Stathopoulos, T. (2012), "Wind load transfer mechanisms on a low wood building using full-scale load data", J. Wind Eng. Ind. Aerod., 104-106, 65-75. https://doi.org/10.1016/j.jweia.2012.04.003

피인용 문헌

  1. A review of wood-frame low-rise building performance study under hurricane winds vol.141, 2017, https://doi.org/10.1016/j.engstruct.2017.03.036
  2. Dynamic characteristics and wind-induced vibration coefficients of purlin-sheet roofs vol.22, pp.5, 2016, https://doi.org/10.12989/scs.2016.22.5.1039
  3. Finite-element modeling framework for predicting realistic responses of light-frame low-rise buildings under wind loads vol.164, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2018.01.034
  4. Assessment of ASCE 7-10 for wind effects on low-rise wood frame buildings with database-assisted design methodology vol.27, pp.3, 2018, https://doi.org/10.12989/was.2018.27.3.163
  5. Nonlinear modeling of roof-to-wall connections in a gable-roof structure under uplift wind loads vol.28, pp.3, 2019, https://doi.org/10.12989/was.2019.28.3.181
  6. Semi-analytical solution for gable roofs under uplift wind loads vol.227, pp.None, 2021, https://doi.org/10.1016/j.engstruct.2020.111420
  7. Numerical assessment of lateral deflection equation of single-storey light-frame wood shear walls vol.48, pp.12, 2014, https://doi.org/10.1139/cjce-2020-0135