DOI QR코드

DOI QR Code

Numerical evaluation of the effect of multiple roughness changes

  • Abdi, Daniel S. (Department of Civil and Environmental Engineering, University of Western Ontario) ;
  • Bitsuamlak, Girma T. (Department of Civil and Environmental Engineering, University of Western Ontario)
  • 투고 : 2013.07.26
  • 심사 : 2014.03.31
  • 발행 : 2014.12.25

초록

The effect of multiple roughness changes close to a building site was examined through three dimensional computational fluid dynamics (CFD) simulations conducted in a virtual boundary layer wind tunnel (V-BLWT). The results obtained were compared with existing wind speed models, namely ESDU-82026 and Wang and Stathopoulos (WS) model. The latter was verified by wind tunnel tests of sixty nine cases of multiple roughness patches, and also with a simplified 2D numerical model. This work extends that numerical study to three dimensions and also models roughness elements explicitly. The current numerical study shows better agreement with the WS model, that has shown better agreements with BLWT tests, than the ESDU model. This is in contrast to previous results of Wang and Stathopoulos, who concluded that CFD shows better agreement with the ESDU model. Many cases were simulated in a V-BLWT that has same dimensions as BLWT used in the original experiment and also in a reduced symmetrical version (S-BLWT) that takes advantage of regular arrangement of roughness blocks. The S-BLWT gives results almost identical to V-BLWT simulations, while achieving significant reduction on computational time and resources.

키워드

참고문헌

  1. Abdi, D., Levin, S. and Bitsuamlak, G. (2009), "Application of an artificial neural network model for boundary layer wind tunnel profile development", Proceedings of the11th Americas Conference on Wind Engineering
  2. Bitsuamlak, G., Stathopoulos, T. and Bedard, C. (2006), "Effects of upstream two dimensional hills on design wind loads: a computational approach", Wind Struct., 9(1), 37-58. https://doi.org/10.12989/was.2006.9.1.037
  3. Blocken, B., Stathopoulos, T. and Carmeliet, J. (2007), "CFD simulation of the atmospheric boundary layer: wall function problems", J. Wind Eng. Ind. Aerod., 41(2), 238-252.
  4. Bradley, E.F. (1968), "A micrometeorological study of velocity profiles and surface drag in the region modified by a change in surface roughness", Q. J. Roy. Meteorol. Soc., 94(401), 361-379. https://doi.org/10.1002/qj.49709440111
  5. Dagnew, A.K. and Bitsuamlak, G.T. (2013), "Computational evaluation of wind loads on buildings: a review", Wind Struct., 16(6), 629-660. https://doi.org/10.12989/was.2013.16.6.629
  6. Deaves, D.M. (1981), "Computation of wind flow over changes in surface roughness", J. Wind Eng. Ind. Aerod., 7(1), 65-94. https://doi.org/10.1016/0167-6105(81)90068-4
  7. Deaves, D.M. and Harris, R.I. (1978), A mathematical model of the structure of strong winds, CIRIA report 76.
  8. ESDU-82026 (1993), Strong winds in the atmospheric boundary layer, Part 1: hourly-mean wind speeds, ESDU International, London, U.K.
  9. ESDU-84030 (1993), Longitudinal turbulence intensities over terrain with multiple roughness changes, ESDU International, London, U.K.
  10. Franke, J. and Hirsch, C. (2004), "Recommendations on the use of CFD in wind engineering", Proceedings of the International Conference in Urban Wind Engineering and Building Aerodynamics .
  11. Garratt, J.R. (1989), "The internal boundary layer - a review", Bound. - Lay. Meteorol., 50(1-4), 171-203.
  12. Grimmond, C.S.B. and Oke, T.R. (1999), "Aerodynamic properties of urban areas derived from analysis of surface form", J. Appl. Meteor., 38, 1262-1292. https://doi.org/10.1175/1520-0450(1999)038<1262:APOUAD>2.0.CO;2
  13. Hargreaves, D.M. and Wright, N.G. (2007), "On the use of k-epsilon model in commercial CFD software to model the atmospheric boundary layer", J. Wind Eng. Ind. Aerod., 95, 355-369. https://doi.org/10.1016/j.jweia.2006.08.002
  14. Jimenez, J. (2004), "Turbulent flow over rough walls", Annu. Rev. Fluid Mech., 36, 173-196. https://doi.org/10.1146/annurev.fluid.36.050802.122103
  15. Lettau, H. (1969), "Note on aerodynamic roughness parameter estimation on the basis of roughness element description", J. Appl. Meteor., 8, 828-833. https://doi.org/10.1175/1520-0450(1969)008<0828:NOARPE>2.0.CO;2
  16. MacDonald, R.W., Griffiths, R.F. and Hall, D.J. (1998), "An improved method for the estimation of surface roughness of obstacle arrays", Atmos. Environ., 32(11), 1857-1864. https://doi.org/10.1016/S1352-2310(97)00403-2
  17. Miles, S.D. and Westbury, P.S. (2003), Practical tools for wind engineering in the built environment, The QNET-CFD Network Newsletter 2.
  18. Oke, T. (1998), "Street design and urban canopy layer climate", Energy Build., 103(1-3), 103-113.
  19. O'Sullivan, J., Archer, R. and Flay, R.G.J. (2011), "Consistent boundary conditions for flows within the atmospheric boundary layer", J. Wind Eng. Ind. Aerod., 99(9), 66-67.
  20. Richards, P.J. and Hoxey, R.P. (1993), "Appropriate boundary conditions for computational wind engineering models using the k-epsilon turbulence model", J. Wind Eng. Ind. Aerod., 46,145-153.
  21. Savelyev, S. and Taylor, P.A. (2005), "Internal boundary layers: 1. Height formulae for neutral and adiabatic flows", Bound. - Lay. Meteorol., 43, 273-286.
  22. Wang, K. and Stathopoulos, T. (2007), "Exposure model for wind loading of buildings", J. Wind Eng. Ind. Aerod., 95(9-11), 1511-1525. https://doi.org/10.1016/j.jweia.2007.02.016
  23. Weng, W., Taylor, P.A. and Salmon, J.R. (2010), "A 2-D numerical model of boundary-layer flow over single and multiple surface condition changes", J. Wind Eng. Ind. Aerod., 98(3), 121-132. https://doi.org/10.1016/j.jweia.2009.10.006
  24. Wieringa, J. (1986), "Roughness-dependent geographical interpolation of surface wind speed averages", Q. J. Roy. Met. Soc. 112(473), 867-889. https://doi.org/10.1002/qj.49711247316
  25. Wieringa, J. (1993), "Representative roughness parameters for homogeneous terrain", Bound. - Lay. Meteorol., 63, 323-363. https://doi.org/10.1007/BF00705357
  26. Zaki, S., Hagishma, A., Tanimoto, J. and Ikegaya, N. (2010), "Wind tunnel measurement of aerodynamic parameters of urban building arrays with random geometries", Proceedings of the 5th International Symposium on Computational Wind Engineering(CWE2010).

피인용 문헌

  1. Asynchronous Parallelization of a CFD Solver vol.2015, 2015, https://doi.org/10.1155/2015/295393
  2. Wind Turbine Loads Induced by Terrain and Wakes: An Experimental Study through Vibration Analysis and Computational Fluid Dynamics vol.10, pp.11, 2017, https://doi.org/10.3390/en10111839
  3. Wind flow simulations in idealized and real built environments with models of various level of complexity vol.22, pp.4, 2016, https://doi.org/10.12989/was.2016.22.4.503
  4. Assessing methods to extrapolate the vertical wind-speed profile from surface observations in a city centre during strong winds vol.173, 2018, https://doi.org/10.1016/j.jweia.2017.09.007
  5. Wind flow simulations on idealized and real complex terrain using various turbulence models vol.75, 2014, https://doi.org/10.1016/j.advengsoft.2014.05.002
  6. Wind Loading of Structures: Framework, Phenomena, Tools and Codification vol.12, 2017, https://doi.org/10.1016/j.istruc.2017.09.008
  7. LES of ABL flow in the built-environment using roughness modeled by fractal surfaces vol.19, 2015, https://doi.org/10.1016/j.scs.2015.07.003