DOI QR코드

DOI QR Code

Feedforward actuator controller development using the backward-difference method for real-time hybrid simulation

  • Phillips, Brian M. (Department of Civil and Environmental Engineering, University of Maryland) ;
  • Takada, Shuta (Department of Civil Engineering, University of Tokyo) ;
  • Spencer, B.F. Jr. (Department of Civil and Environmental Engineering, University of Illinois) ;
  • Fujino, Yozo (Department of Civil Engineering, University of Tokyo)
  • 투고 : 2014.03.15
  • 심사 : 2014.06.07
  • 발행 : 2014.12.25

초록

Real-time hybrid simulation (RTHS) has emerged as an important tool for testing large and complex structures with a focus on rate-dependent specimen behavior. Due to the real-time constraints, accurate dynamic control of servo-hydraulic actuators is required. These actuators are necessary to realize the desired displacements of the specimen, however they introduce unwanted dynamics into the RTHS loop. Model-based actuator control strategies are based on linearized models of the servo-hydraulic system, where the controller is taken as the model inverse to effectively cancel out the servo-hydraulic dynamics (i.e., model-based feedforward control). An accurate model of a servo-hydraulic system generally contains more poles than zeros, leading to an improper inverse (i.e., more zeros than poles). Rather than introduce additional poles to create a proper inverse controller, the higher order derivatives necessary for implementing the improper inverse can be calculated from available information. The backward-difference method is proposed as an alternative to discretize an improper continuous time model for use as a feedforward controller in RTHS. This method is flexible in that derivatives of any order can be explicitly calculated such that controllers can be developed for models of any order. Using model-based feedforward control with the backward-difference method, accurate actuator control and stable RTHS are demonstrated using a nine-story steel building model implemented with an MR damper.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation

참고문헌

  1. Carlson, J.D. and Jolly, M.R. (2000), "MR fluid, foam, and elastomer devices", Mechatronics, 10(4-5), 555-569. https://doi.org/10.1016/S0957-4158(99)00064-1
  2. Carrion, J.E. and Spencer Jr., B.F. (2007), Model-based strategies for real-time hybrid testing, Newmark Structural Engineering Laboratory Report Series, University of Illinois at Urbana-Champaign, Urbana, IL, No. 6.
  3. Carrion, J.E., Spencer Jr., B.F. and Phillips B.M. (2009), "Real-time hybrid simulation for structural control performance assessment", Earthq. Eng. Eng. Vib., 8(4), 481-492. https://doi.org/10.1007/s11803-009-9122-4
  4. Chen, C. and Ricles, J.M. (2009), "Analysis of actuator delay compensation method for real-time testing", Eng. Struct., 31(11), 2643-2655. https://doi.org/10.1016/j.engstruct.2009.06.012
  5. Craig, R.R. and Kurdila, A.J. (2006), Fundamentals of Structural Dynamics, 2nd Ed., Wiley, Hoboken, NJ, USA.
  6. Dyke, S.J., Spencer Jr., B.F., Quast, P. and Sain, M.K. (1995), "Role of control-structure interaction in protective system design", J. Eng. Mech. - ASCE, 121(2), 322-338. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:2(322)
  7. Dyke, S.J., Spencer, Jr., B.F., Sain, M.K. and Carlson, J.D. (1996), "Modeling and control of magnetorheological dampers for seismic response reduction", Smart Mater. Struct., 5(5), 565-575. https://doi.org/10.1088/0964-1726/5/5/006
  8. Hakuno, M., Shidawara, M. and Hara, T. (1969), "Dynamic destructive test of a cantilever beam controlled by an analog computer", T. Japan Soc.Civil Eng., 171, 1-9 (In Japanese).
  9. Horiuchi, T., Nakagawa, M., Sugano, M. and Konno, T. (1996), "Development of a real-time hybrid experimental system with actuator delay compensation", Proceedings of the 11th World Conference on Earthquake Engineering, Paper No. 660.
  10. Jung, R.Y., Shing, P.B., Stauffer, E. and Thoen, B. (2007), "Performance of a real-time pseudodynamic test system considering nonlinear structural response", Earthq. Eng. Struct. D., 36(12), 1785-1809. https://doi.org/10.1002/eqe.722
  11. Kim, S.B., Spencer Jr., B.F. and Yun, C.B. (2005), "Frequency domain identification of multi-input, multi-output systems considering physical relationships between measured variables", J. Eng. Mech. - ASCE, 131(5), 461-473. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:5(461)
  12. Lin, Y.Z. and Christenson, R.E. (2009), "Comparison of real-time hybrid testing with shake table tests for an MR damper controlled structure", Proceedings of the 2009 American Control Conference. St. Louis, Missouri, Paper No. FrB20.4.
  13. Mahin, S.A. and Shing, P.B. (1985), "Pseudodynamic method for seismic testing", J. Struct. Eng. - ASCE 111(7), 1482-1503. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:7(1482)
  14. Mahin, S.A., Shing, P.B., Thewalt, C.R. and Hanson, R.D. (1989), "Pseudodynamic test method. Current status and future directions", J. Struct. Eng. -ASCE, 115(8), 2113-2128. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:8(2113)
  15. Merritt, H.E. (1967), Hydraulic control systems, Wiley, New York, NY, USA.
  16. Ohtori, Y., Christenson, R.E. and Spencer Jr., B.F. (1994), "Benchmark control problems for seismically excited nonlinear buildings", J. Eng. Mech. -ASCE, 130(4), 366-385.
  17. Phillips, B.M., Chae, Y., Jiang, Z., Spencer Jr., B.F., Ricles, J.M., Christenson, R.E., Dyke, S.J. and Agrawal A. (2010), "Real-time hybrid simulation benchmark structure with a large-scale MR damper", Proceedings of the 5th World Conference on Structural Control and Monitoring, Shinjuku, Tokyo.
  18. Phillips, B.M. and Spencer Jr., B.F. (2011), Model-based feedforward-feedback tracking control for real-time hybrid simulation, Newmark Structural Engineering Laboratory Report Series, University of Illinois at Urbana-Champaign, Urbana, IL, No. 28.
  19. Phillips, B.M. and Spencer Jr., B.F. (2012a), "Model-based feedforward-feedback actuator control for real-time hybrid simulation", J. Struct. Eng. - ASCE, 139, 1205-1214.
  20. Phillips, B.M. and Spencer Jr., B.F. (2012b), "Model-based multiactuator control for real-time hybrid simulation", J. Eng. Mech. -ASCE, 139(2), 219-228.
  21. Phillips, B.M., Takada, S., Spencer Jr., B.F. and Fujino, Y. (2014a), System identification of servo-hydraulic system, Network for Earthquake Engineering Simulation (NEES)(distributor). Dataset. DOI: 10.4231/D3ZP3W09Z.
  22. Phillips, B.M., Takada, S., Spencer Jr., B.F. and Fujino, Y. (2014b), System identification of servo-hydraulic system with outer-loop control, Network for Earthquake Engineering Simulation (NEES)(distributor). Dataset. DOI: 10.4231/D3V11VK7Z.
  23. Phillips, B.M., Takada, S., Spencer Jr., B.F. and Fujino, Y. (2014c), Tracking performance of outer-loop controllers, Network for Earthquake Engineering Simulation (NEES)(distributor). Dataset. DOI: 10.4231/D3Q814S4P.
  24. Phillips, B.M., Takada, S., Spencer Jr., B.F. and Fujino, Y. (2014d), Real-time hybrid simulation of 9-story structure with MR damper, Network for Earthquake Engineering Simulation (NEES)(distributor). Dataset. DOI: 10.4231/D3KH0DZ9F.
  25. Shing, P.B., Nakashima, M. and Bursi, O.S. (1996), "Application of pseudodynamic test method to structural research", Earthq. Spectra, 12(1), 29-54. https://doi.org/10.1193/1.1585867
  26. Takanashi, K. et al. (1975), "Nonlinear earthquake response analysis of structures by a computer actuator on-line system: Part I, details of the system", Transactions of the Architectural Institute of Japan, University of Tokyo, Tokyo, Japan, 229, 77-83 (In Japanese). https://doi.org/10.3130/aijsaxx.229.0_77
  27. Takanashi, K. and Nakamura, M. (1987), "Japanese activities on on-line testing", J. Eng. Mech. - ASCE, 113(7), 1014-1032. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:7(1014)
  28. Tomizuka, M. (1987), "Zero phase error tracking algorithm for digital control", J. Dyn. Syst. Measurement Control, 109(3), 65-68. https://doi.org/10.1115/1.3143822
  29. Wallace, M., Wagg, D.J. and Neild, S.A. (2005), "An adaptive polynomial based forward prediction algorithm for multi-actuator real-time dynamic substructuring", P. Roy. Soc., 461, 3807-3826. https://doi.org/10.1098/rspa.2005.1532
  30. Yang, G., Spencer Jr., B.F., Carlson, J.D. and Sain, M.K. (2002), "Large-scale MR fluid dampers: Modeling and dynamic performance considerations", Eng. Struct., 24(3), 309-323. https://doi.org/10.1016/S0141-0296(01)00097-9
  31. Zhao, J., French, C., Shield, C. and Posbergh, T. (2003), "Considerations for the development of real-time dynamic testing using servo-hydraulic actuation", Earthq. Eng. Struct. D., 32(11), 1773-1794. https://doi.org/10.1002/eqe.301

피인용 문헌

  1. Servo-hydraulic actuator in controllable canonical form: Identification and experimental validation vol.100, 2018, https://doi.org/10.1016/j.ymssp.2017.07.022
  2. AN EXPERIMENTAL METHOD TO EXAMINE PROPERTY CHANGE OF TUNED VISCOUS MASS DAMPER vol.23, pp.55, 2017, https://doi.org/10.3130/aijt.23.815
  3. Predictive stability indicator: a novel approach to configuring a real-time hybrid simulation vol.46, pp.1, 2017, https://doi.org/10.1002/eqe.2775
  4. Design and Performance Evaluation of an Optimal Discrete-Time Feedforward Controller for Servo-Hydraulic Compensation vol.144, pp.2, 2018, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001399
  5. Substructure Hybrid Simulation Boundary Technique Based on Beam/Column Inflection Points vol.10, pp.8, 2018, https://doi.org/10.3390/su10082655
  6. Cyber-physical approach to the optimization of semiactive structural control under multiple earthquake ground motions pp.10939687, 2019, https://doi.org/10.1111/mice.12431
  7. An optimal discrete-time feedforward compensator for real-time hybrid simulation vol.20, pp.4, 2014, https://doi.org/10.12989/sss.2017.20.4.483
  8. Stability analysis of real-time hybrid simulation in consideration of time delays of actuator and shake table using delay differential equations vol.33, pp.4, 2014, https://doi.org/10.1007/s12206-019-0301-6
  9. Cyber-physical structural optimization using real-time hybrid simulation vol.195, pp.None, 2019, https://doi.org/10.1016/j.engstruct.2019.05.042
  10. Robust stability analysis of real-time hybrid simulation considering system uncertainty and delay compensation vol.25, pp.6, 2014, https://doi.org/10.12989/sss.2020.25.6.719
  11. Performance validation and application of a mixed force-displacement loading strategy for bi-directional hybrid simulation vol.26, pp.3, 2020, https://doi.org/10.12989/sss.2020.26.3.373
  12. Feasibility study of a passive rate-independent damping device for the seismic protection of low-frequency structures vol.34, pp.None, 2014, https://doi.org/10.1016/j.istruc.2021.09.005
  13. Experimental study of earthquake input energy of low‐frequency structures equipped with a passive rate‐independent damping device vol.29, pp.2, 2014, https://doi.org/10.1002/stc.2883