DOI QR코드

DOI QR Code

Shear response estimate for squat reinforced concrete walls via a single panel model

  • Massone, Leonardo M. (Department of Civil Engineering, University of Chile) ;
  • Ulloa, Marco A. (Department of Civil Engineering, University of Chile)
  • 투고 : 2014.04.17
  • 심사 : 2014.05.05
  • 발행 : 2014.11.25

초록

Squat reinforced concrete walls require enough shear strength in order to promote flexural yielding, which creates the need for designers of an accurate method for strength prediction. In many cases, especially for existing buildings, strength estimates might be insufficient when more accurate analyses are needed, such as pushover analysis. In this case, estimates of load versus displacement are required for building modeling. A model is developed that predicts the shear load versus shear deformation of squat reinforced concrete walls by means of a panel formulation. In order to provide a simple, design-oriented tool, the formulation considers the wall as a single element, which presents an average strain and stress field for the entire wall. Simple material constitutive laws for concrete and steel are used. The developed models can be divided into two categories: (i) rotating-angle and (ii) fixed-angle models. In the first case, the principal stress/strain direction rotates for each drift increment. This situation is addressed by prescribing the average normal strain of the panel. The formation of a crack, which can be interpreted as a fixed principal strain direction is imposed on the second formulation via calibration of the principal stress/strain direction obtained from the rotating-angle model at a cracking stage. Two alternatives are selected for the cracking point: fcr and 0.5fcr (post-peak). In terms of shear capacity, the model results are compared with an experimental database indicating that the fixed-angle models yield good results. The overall response (load-displacement) is also reasonable well predicted for specimens with diagonal compression failure.

키워드

과제정보

연구 과제 주관 기관 : National Commission on Scientific and Technological Research(CONICYT)

참고문헌

  1. Antebi, J., Utku, S. and Hansen, R.J. (1960), "The response of shear walls to dynamic loads", Cambridge: Department of Civil and Sanitary Eng., Massachusetts Institute of Technology.
  2. Barda, F., Hanson, J.M. and Corley, W.G. (1977), "Shear strength of low-rise walls with boundary elements", ACI special publication-Reinforced concrete structures in seismic zones , SP-53, 149-202.
  3. Benjamin, J.R. and Williams, H.A. (1957), "The behavior of one-story reinforced concrete shear walls", J Struct. Div, ASCE, 83(3), 1-49.
  4. Cardenas, A.E., Russell, H.G. and Corley, W.G. (1980), "Strength of low-rise structural walls", ACI special publication-Reinforced concrete structures subject to wind and earthquake forces, SP-63, 221-421.
  5. Galletly, G.D. (1952), "Behavior of reinforced concrete shear walls under static load", Cambridge: Department of Civil and Sanitary Eng., Massachusetts Institute of Technology.
  6. Gupta, A. and Rangan, B.V. (1998), "High-strength concrete structural walls", ACI Struct. J., 95(2), 194-205.
  7. Hidalgo, P.A., Ledezma, C.A. and Jordan, R.M. (2002), "Seismic behavior of squat reinforced concrete shear walls", Earthq. Spectra, 18(2), 287-308. https://doi.org/10.1193/1.1490353
  8. Hirosawa, M. (1975), "Past experimental results on reinforced concrete shear walls and their analysis" (in Japanese), Kenchiku Kenkyu Shiryo. No. 6. Tokyo: Building Research Institute, Ministry of Construction.
  9. Hsu, T.T.C. and Mo, Y.L. (1985), "Softening of concrete in low-rise shearwalls", ACI Struct J., 82(6), 883-889.
  10. Hsu, T.T.C. and Mo, Y.L. (2010), "Unified Theory of concrete structures", John Wiley & Sons.
  11. Hwang, S.J., Fang, W.H., Lee, H.J. and Yu, H.W. (2001), "Analytical model for predicting shear strength of Squat Walls", J. Struct. Eng., 127(1), 43-50. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(43)
  12. Kaseem, W. and Elsheikh, A. (2010), "Estimation of shear strength of structural shear walls", J. Struct. Eng., 136(10), 1215-1224. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000218
  13. Massone, L.M. (2010), "Strength prediction of squat structural walls via calibration of a shear-flexure interaction model", Eng. Struct., 32(4), 922-932. https://doi.org/10.1016/j.engstruct.2009.12.018
  14. Massone, L.M., Orakcal, K. and Wallace, J.W. (2009), "Modeling of squat structural walls controlled by shear", ACI Struct J., 106(5), 646-655.
  15. Mo, Y.L., Zhong J. and Hsu, T.T.C. (2008), "Seismic simulation of RC wall-type structures", Eng. Struct., 30(11), 3167-3175. https://doi.org/10.1016/j.engstruct.2008.04.033
  16. Mohammadi-Doostdar, H. and Saatcioglu, M. (2002), Behavior and Design of Earthquake Resistant Low-Rise Shear Walls, Report OCCERC 02-28, Ottawa Carleton Earthquake Engineering Research Center, Canada: Department of Civil Eng., University of Ottawa.
  17. Orakcal, K., Massone, L.M. and Wallace, J.W. (2009), "Shear strength of lightly reinforced wall piers and spandrels", ACI Struct J., 106(4), 455-465.
  18. Palermo, D. and Vecchio, F.J. (2002), "Behavior of three-dimensional reinforced concrete shear walls", ACI Struct J., 99(1), 81-89.
  19. Schlaich, J., Schafer, K. and Jennewein, M. (1987), "Toward a consistent design of structural concrete", PCI J., 32(3), 75-150. https://doi.org/10.15554/pcij.03011987.75.85
  20. Terzioglu, T. (2011), "Experimental evaluation of the lateral load behavior of squat structural walls", Ms Thesis, Civil Engineering Department, Bogazici University.
  21. Vecchio, F. and Collins, M.P. (1986), "The modified compression-field theory for reinforced concrete elements subjected to shear", ACI Struct J., 83(2), 219-231.
  22. Villar, D. (2010), "Modeling and prediction of shear capacity in squat walls via a strut-and-tie model" (in spanish), Engineering thesis, Civil Engineering Department, University of Chile.
  23. Yamada, M., Kawamura, H. and Katagihara, K. (1974), "Reinforced concrete shear walls without openings; test and analysis", ACI special publication-Shear in reinforced concrete, SP-42, 539-558.
  24. Zhang, L.-X.B. and Hsu, T.T.C. (1998), "Behavior and analysis of 100 MPa concrete membrane elements", J. Struct. Eng., 124(1), 24-34. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(24)

피인용 문헌

  1. Shear strength model for reinforced concrete corbels based on panel response vol.11, pp.4, 2016, https://doi.org/10.12989/eas.2016.11.4.723
  2. Prediction of the Lateral Load-Displacement Curves for Reinforced Concrete Squat Walls Failing in Shear vol.143, pp.10, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001872
  3. General solution for shear strength estimate of RC elements based on panel response vol.172, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2018.06.038
  4. Analytical model for shear strength estimation of reinforced concrete beam-column joints vol.173, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.07.005