The Research Journal of the Costume Culture (복식문화연구)

The Costume Culture Association (복식문화학회)
권호 표지
DOI QR코드

DOI QR Code

A comparison of fit and appearance between real torso length sloper with 3D virtual torso length sloper

토르소 원형의 실제착의와 3D 가상착의의 외관 유사도 평가에 관한 연구

  • Kim, Youngsook (Dept. of Cloth and Textiles, Graduate School, Kyung Hee University) ;
  • Yin, Siya (Dept. of Cloth and Textiles, Graduate School, Kyung Hee University) ;
  • Song, Hwa Kyung (Dept. of Cloth and Textiles, Kyung Hee University)
  • 김영숙 (경희대학교 대학원 의상학과) ;
  • 윤사아 (경희대학교 대학원 의상학과) ;
  • 송화경 (경희대학교 의상학과)
  • Received : 2014.10.06
  • Accepted : 2014.12.01
  • Published : 2014.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study is designed to analyze the similarity of fit and appearance between 3D virtual torso length sloper with real torso length sloper according to three 3D virtual clothing simulation programs (Optitex, CLO 3D, i-Designer), three body types (A, N, H) and fit status. We selected three representative body type models of females aged 20~30 and got their direct body measurements. Using these body measurements, we developed three 3D avatar body models and made three torso length fitted sloper with long sleeves. Thirty expert fit judges consisting of technical designers and graduate students assessed the similarity of fit and appearance between 3D virtual clothing and real clothing by observing images classified into front, back and side scene. We conducted ANOVA and post-hoc analyses to compare fit and appearance between real clothing and virtual clothing depending on three program. The results showed that CLO 3D represented fit and silhouette most similarly among the programs, especially girths, width and length. i-Designer tended to be relatively good to represent stress fold amount and silhouette. Optitex was assessed relatively better in expressing ease amounts in torso girths and armscye girths, but relatively worse for width, length, stress fold amount and silhouette.

Keywords

References

  1. Cha, S. J., & Kang, Y. K.(2013). Comparison of basic bodice block for adults women by 3D simulation: Focus of the DC suite program. Journal of Fashion Business, 17(2), 63-81. https://doi.org/10.12940/jfb.2013.17.2.63
  2. Choi, C. S., & Kim, H. S.(2003). Construction of the personal 3D characters for virtual clothing coordination. Journal of the Korean Society of Clothing and Textiles, 27(9), 1015-1025.
  3. Choi, J.(2008). A study on analysis of lower body type from 3D body scan data and boots cut jeans pattern: Focus on the virtual appearance evaluation. Unpublished master's thesis, Chonnam National University, Gwangju, Korea.
  4. Choi, M. S.(2005). Simulation on silhouette variations according to vacant space quantity between body and clothing: focused on men's upper body. The Society of Fashion & Textile Industry, 7(2), 225-230.
  5. Kim, H. A., & Ryu, H. S., Lee, J. H., & Nam, Y. J.(2011). A study on the comparing visual images between the real garment and the 3D garment simulation of flare skirts. Korean Journal of the Science of Emotion & Sensibility, 14(3), 385-394.
  6. Kim, N. S.(2008). Classification of upper body types from the 3D body scan data and pattern design of the big size brassiere using clothes modeling system. Unpublished master's thesis, Chonnam National University, Gwangju, Korea.
  7. Korean Standards Association.(2009). KS K 0051:2009 - Sizing systems for female adult's garments. Eumseong: Korean Agency for Technology and Standards.
  8. Lee, H. S., & Nam, Y. J.(2007). Patternmaking for ready-to-wear. Seoul: Kyohak Yungusa.
  9. Lee, J. H.(2007). A Study on the comparison between 3D virtual clothing and real clothing. Unpublished master's thesis, Seoul National University, Seoul, Korea.
  10. Lee, J. Y.(2009). 3D dress modeling and pattern development process. Unpublished master's thesis, Chungnam National University, Daejeon, Korea.
  11. Lee, S., Lee, S., Kim, H., & Kang, I.(2011). The comparative analysis of shapes of 3D apparel CAD virtual clothing and actual clothing. Journal of Korean Design Forum, 30, 255-264.
  12. Lim, J. Y., & Lee, H. Y.(2012). A development of Hanbok Jeogori pattern from virtual garment simulation: With a focus on women in their 50s. Fashion and Textiles Research Journal, 14(4), 607-613. https://doi.org/10.5805/KSCI.2012.14.4.607
  13. Na, Y. H.(2012). Comparative study on a design expression characteristics of movie clothing and 3D virtual clothing: focusing on the CLO 3D software. Unpublished master's thesis, Sejong University, Seoul, Korea.
  14. Oh, S. Y.(2012). A study on the development of women's basic clothing pattern for education and teaching methods. Unpublished doctoral dissertation, Ewha Women's National University, Seoul, Korea.
  15. Oh, Y. S.(2011). Development of a jacket pattern for plus-size women using by visual effect: focusing on comparison between real clothing and virtual clothing. Unpublished doctoral dissertation, Pusan National University, Busan.
  16. Park, H. J.(2010). Study on the development of knitted jacket pattern by women's body type from 3D virtual try-on system. Unpublished master's thesis, Sookmyung Women's University, Seoul, Korea.
  17. Park, K. H.(2007). A study for visual image based on real human body fitting and computer simulation fitting of flare skirt: Focusing on obese woman in 20s. Unpublished master's thesis, Hanyang University, Seoul, Korea.
  18. Uh, M. K.(2011). Development of a pattern and visual image for a one-piece dress using a 3D virtual clothing system. The Research Journal of the Costume Culture, 19(3), 597-611. https://doi.org/10.29049/rjcc.2011.19.3.597
  19. Yang, C. E., & Kim, S. J.(2006). A study on the fitness evaluation of virtual model using 3D clothes modeling software: Focused on Qualoth program. Korean Journal of Family Medicine, 44(7), 153-162.

Cited by

  1. Development of Ergonomic Pattern for Motorcycle Pants Using 3D Virtual Clothing vol.25, pp.2, 2016, https://doi.org/10.5934/kjhe.2016.25.2.207
  2. A Study on Basic Pattern Evaluations Utilizing a Bodice Sloper Size Measurement Tool vol.54, pp.4, 2016, https://doi.org/10.6115/fer.2016.033
  3. Comparative Pattern Analysis and the Fitness Evaluation of Brassieres using 3D virtual clothing simulation - Focusing on Cross Section of Human Body Shape & Changing of Silhouette - vol.66, pp.8, 2016, https://doi.org/10.7233/jksc.2016.66.8.046
  4. 의복구성학 분야의 연구 현황과 전망 - 학회지를 중심으로 - vol.20, pp.5, 2014, https://doi.org/10.12940/jfb.2016.20.5.102
  5. 실버 의류산업 활성화를 위한 노년 비만여성의 토르소 원형 연구 - CLO 3D 가상착의 시스템 활용 - vol.25, pp.4, 2014, https://doi.org/10.7741/rjcc.2017.25.4.476
  6. 거북목 증후군 체형의 20대 여성의 상의 원형패턴 개발 vol.25, pp.3, 2021, https://doi.org/10.12940/jfb.2021.25.3.144
  7. KES-FB 태 평가 데이터를 활용한 디지털소재 감성이미지 도출방법 연구 vol.23, pp.5, 2021, https://doi.org/10.5805/sfti.2021.23.5.667