Abstract
In general, multiple hydraulic servo actuators are installed on one control surface of aero-dynamically highly loaded condition aircraft for redundancy management to satisfy flight control safety requirements. If motions of multiple actuators are not synchronized, control surface is deformed from its free stressed state. In result, force fight conditions are generated on each actuator due to restoration reaction force of deformed control surface. In addition, force fight is induced from severe initial rigging tolerance. Force fight condition of multiple actuators affects control accuracies and reduces operational life of actuators and control surface due to fatigue phenomenon. In this study, we designed controller using force feedback to reduce force fight of duplex servo actuation system.
항공기의 자세제어를 담당하는 각각의 비행 조종면에 중복안정성 등의 이유로 여러 개의 작동기를 연결하여 사용하고 있다. 다중 작동기들이 동시에 정확하게 같은 위치로 이동하지 않으면 비행조종면에 변형이 발생한다. 그 결과 변형된 조종면이 원래 상태로 복원하려는 힘에 의해 작동기들 간에 force fighting이 발생한다. 게다가 force fighting은 각 장치들의 초기 허용 오차 등에 의해서도 발생한다. 다중 작동기간의 force fighting 현상은 제어정밀도에 영향을 미치고 피로파괴의 원인이 되어 작동기와 비행조종면의 수명을 단축할 수도 있다. 본 논문에서는 두 개의 서보작동기를 사용하는 시스템의 force fighting을 감소하기 위하여 힘되먹임제어를 사용하는 제어기를 설계하였다.