The Journal of Advanced Prosthodontics

  • 제5권4호
  • /
  • Pages.448-451
  • /
  • 2013
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

The effect of coloring liquids on the translucency of zirconia framework

  • Tuncel, Ilkin (Department of Prosthodontics, Faculty of Dentistry, Bezmialem Vakif University) ;
  • Eroglu, Erdal (Department of Prosthodontics, Faculty of Dentistry, Suleyman Demirel University) ;
  • Sari, Tugrul (Department of Prosthodontics, Faculty of Dentistry, Bezmialem Vakif University) ;
  • Usumez, Aslihan (Department of Prosthodontics, Faculty of Dentistry, Bezmialem Vakif University)
  • 투고 : 2013.05.26
  • 심사 : 2013.11.05
  • 발행 : 2013.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. Translucency of all-ceramic restorations is an important factor which affects the final appearance and esthetic outcome of the restoration. The aim of this study was to evaluate the effect of the shade of coloring liquid on the translucency of zirconia framework. MATERIALS AND METHODS. Thirty zirconium oxide core plate ($15{\times}12{\times}0.5$ mm) were divided into 6 groups of 5 plates each. Each group was classified according to the shade of coloring liquid based on Vita Classic Scale (A2, A3, B1, C2, and D2), and each sample was immersed in coloring liquid for 3 seconds as recommended by the manufacturer, except for the control group. Contrast ratio, as a translucency parameter, was calculated using a spectrophotometer and the data were analyzed with oneway analysis of variance (ANOVA) and Tukey's honestly significant differences (HSD) tests (${\alpha}$=.05). RESULTS. Significant differences in translucency among the control and test groups, and the B1 shaded group and other shades was observed. There were no significant differences among A2, A3, C2, and D2 shaded groups. CONCLUSION. The translucency of the zirconium oxide cores was affected by the coloring procedure and significant differences in the translucency measurements were identified between specific shades.

키워드

참고문헌

  1. Joiner A. Tooth colour: a review of the literature. J Dent 2004;32:3-12.
  2. Dietschi D. Layering concepts in anterior composite restorations. J Adhes Dent 2001;3:71-80.
  3. Raptis NV, Michalakis KX, Hirayama H. Optical behavior of current ceramic systems. Int J Periodontics Restorative Dent 2006;26:31-41.
  4. Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996;75:18-32. https://doi.org/10.1016/S0022-3913(96)90413-8
  5. Sorensen JA, Cruz M, Mito WT, Raffeiner O, Meredith HR, Foser HP. A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodontics Aesthet Dent 1999;11:95-106.
  6. Giordano RA. Dental ceramic restorative systems. Compend Contin Educ Dent 1996;17:779-82, 784-6.
  7. Holloway JA, Miller RB. The effect of core translucency on the aesthetics of all-ceramic restorations. Pract Periodontics Aesthet Dent 1997;9:567-74.
  8. Clarke FJ. Measurement of color of human teeth. In: McLean JW, editor. Proceedings of the First International Symposium on Ceramics. Chicago: Quintessence; 1983. p. 441-90.
  9. Yu B, Ahn JS, Lee YK. Measurement of translucency of tooth enamel and dentin. Acta Odontol Scand 2009;67:57-64. https://doi.org/10.1080/00016350802577818
  10. Spear F, Holloway J. Which all-ceramic system is optimal for anterior esthetics? J Am Dent Assoc 2008;139:19S-24S.
  11. Nakamura T, Saito O, Fuyikawa J, Ishigaki S. Influence of abutment substrate and ceramic thickness on the colour of heat-pressed ceramic crowns. J Oral Rehabil 2002;29:805-9. https://doi.org/10.1046/j.1365-2842.2002.00919.x
  12. Brodbelt RH, O'Brien WJ, Fan PL. Translucency of dental porcelains. J Dent Res 1980;59:70-5. https://doi.org/10.1177/00220345800590011101
  13. Kingery WD, Bowen HK, Uhlmann DR. Introduction to ceramics. 2nd ed. New York; John Wiley and Sons; 1976, p. 646-89.
  14. Berns RS. Principles of color technology. 3rd ed. New York; John Wiley and Sons, Inc; 2000, p. 8-9.
  15. Mclean JW. New dental ceramics and esthetics. J Esthet Dent 1995;7:141-9. https://doi.org/10.1111/j.1708-8240.1995.tb00570.x
  16. Binns D. The chemical and physical properties of dental porcelain. In: McLean JW, editor. Dental ceramics Proceedings of the first ınternational symposium on ceramics. Chicago; Quintessence; 1983, p. 41.
  17. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002; 88:4-9.
  18. Liu MC, Aquilino SA, Lund PS, Vargas MA, Diaz-Arnold AM, Gratton DG, Qian F. Human perception of dental porcelain translucency correlated to spectrophotometric measurements. J Prosthodont 2010;19:187-93. https://doi.org/10.1111/j.1532-849X.2009.00542.x
  19. Spyropoulou PE, Giroux EC, Razzoog ME, Duff RE. Translucency of shaded zirconia core material. J Prosthet Dent 2011;105:304-7. https://doi.org/10.1016/S0022-3913(11)60056-5

피인용 문헌

  1. Comparison of the translucency of shaded zirconia all-ceramic systems vol.6, pp.5, 2014, https://doi.org/10.4047/jap.2014.6.5.415
  2. The Effect of Luting Cement and Titanium Base on the Final Color of Zirconium Oxide Core Material vol.26, pp.2, 2015, https://doi.org/10.1111/jopr.12377
  3. Evaluation of translucency of monolithic zirconia and framework zirconia materials vol.8, pp.3, 2016, https://doi.org/10.4047/jap.2016.8.3.181
  4. Color in Zirconia-Based Restorations and Related Factors: A Literature Review vol.27, pp.2, 2018, https://doi.org/10.1111/jopr.12740
  5. Color Aspect of Monolithic Zirconia Restorations: A Review of the Literature pp.1059941X, 2018, https://doi.org/10.1111/jopr.12906
  6. Does Surface Finishing Method Can Alter the Colour of Monolithic Zirconia Restoration? vol.19, pp.3, 2013, https://doi.org/10.1515/bjdm-2015-0047
  7. Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test vol.60, pp.None, 2013, https://doi.org/10.1016/j.jdent.2017.03.002
  8. Effect of glazing and aging on optical properties of high-translucency zirconia vol.44, pp.4, 2013, https://doi.org/10.14815/kjdm.2017.44.4.319
  9. Effect of different immersion times and sintering temperatures on translucency of monolithic nanocrystalline zirconia vol.4, pp.1, 2018, https://doi.org/10.1016/j.fdj.2017.09.003
  10. Comparison of translucency for different thicknesses of recent types of esthetic zirconia ceramics versus conventional ceramics … (in vitro study) vol.4, pp.2, 2018, https://doi.org/10.1016/j.fdj.2018.05.003
  11. Simulated occlusal adjustments and their effects on zirconia and antagonist artificial enamel vol.11, pp.3, 2013, https://doi.org/10.4047/jap.2019.11.3.162
  12. Effects of sintering time on translucency and color of translucent zirconia ceramics vol.33, pp.4, 2021, https://doi.org/10.1111/jerd.12723