참고문헌
- J. Lin, W. D. Sproul, and J. J. Moore, "Tribological Behavior of Thick CrN Coatings Deposited by Modulated Pulsed Power Magnetron Sputtering," Surf. Coat. Tech., 206 [8-9] 2474-83 (2012). https://doi.org/10.1016/j.surfcoat.2011.10.053
- J. D. Leea, Q. M. Wang, and K. H. Kima, "Syntheses and Mechanical Properties of Quaternary Cr-Si-O-N Coatings by Hybrid Coating System," J. Kor. Inst. Surf., 43 [5] 238-42 (2010). https://doi.org/10.5695/JKISE.2010.43.5.238
- Y. K. Cho, S. K. Kim, W. B. Lee, and S. W. Kim, "Low Temperature Deposition of CrN Films by the AlP Method," J. Kor. Soc. Heat Treat., 20 [2] 78-83 (2007).
- J. H. Paik, W. K. Han, and S. G. Kang, "Comparison of Corrosion Behavior of CrN Coating SUS316L with Different Layer Structure for Polymer Electrods Membrane Fuel Cell Bipolar Plate," Kor. J. Mater. Res., 20 [4] 187-93 (2010). https://doi.org/10.3740/MRSK.2010.20.4.187
- C. Turan, O. N. Cora, and M. Koc, "Investigation of the Effects of Process Sequence on the Contact Resistance Characteristics of Coated Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells," J. Power Sources, 243 [12] 925-34 (2013). https://doi.org/10.1016/j.jpowsour.2013.05.182
- H. Tawfik, Y. Hung, and D. Mahajan, "Metal Bipolar Plates for PEM Fuel Cell-A Review," J. Power Sources, 163 [2] 755-67 (2007). https://doi.org/10.1016/j.jpowsour.2006.09.088
-
I. E. Paulauskas, M. P. Brady, H. M. Meyer, R. A. Buchanan, and L. R. Walker, "Corrosion Behavior of CrN,
$Cr_2N$ and P Phase Surfaces on Nitrided Ni-50Cr for Proton Exchange Membrane Fuel Cell Bipolar Plates," Corros. Sci., 48 [10] 3157-71 (2006). https://doi.org/10.1016/j.corsci.2005.10.019 - M. Katayama, "TFT-LCD Technology," Thin Solid Films, 341 [1] 140-47 (1999). https://doi.org/10.1016/S0040-6090(98)01519-3
- J. W. Lee, S. K. Tien, Y. C. Kuo, and C. M. Chen, "The Mechanical Properties Evaluation of the CrN Coatings Deposited by the Pulsed DC Reactive Magnetron Sputtering," Surf. Coat. Tech., 200 [10] 3330-35 (2006). https://doi.org/10.1016/j.surfcoat.2005.07.047
- M. G. Han and S. Y. Chun, "Growing Behavior of Nanocrystalline TiN Films by Asymmetric Pulsed DC Reactive Magnetron Sputtering (in Korean)," J. Kor. Ceram. Soc., 48 [5] 342-47 (2011). https://doi.org/10.4191/kcers.2011.48.5.342
- J. W. Lee, S. K. Tien, and Y. C. Kuo, "The Effects of Pulse Frequency and Substrate Bias to the Mechanical properties of CrN Coatings Deposited by Pulsed DC Magnetron Sputtering," Thin Solid Films., 494 [1-2] 161-67 (2006). https://doi.org/10.1016/j.tsf.2005.07.190
- H. D. Ko, C. S. Lee, W. P. Tai, S. J. She, and Y. S. Kim, "Effect of Pulse Frequency on the Properties of ZnO : Al Thin Films Prepared by Pulsed DC Magnetron Sputtering (in Korean)," J. Kor. Ceram. Soc., 41 [6] 476-80 (2004). https://doi.org/10.4191/KCERS.2004.41.6.476
- J. H. Kim, J. K. Lee, and J. H. Ahn, "Growing Behavior of AlN Thin Film Deposited by Asymmetric Bipolar Pulsed DC Reactive Sputtering," J. Kor. Inst. Surf. Eng., 38 [1] 61-7 (2001).
- E. G. Fu, D. M. Zhuang, G. Zhang, Z. Ming, W. F. Yang, and J. F. Liu, "Properties of Transparent Conductive ZnO:Al Thin Films Prepared by Magenetron Sputtering," Microelectron. J., 35 [4] 383-87 (2004). https://doi.org/10.1016/S0026-2692(03)00251-9
- J. Lin, J. J. Moore, W. D. Sproul, B. Mishra, Z. Wu, and J. Wang, "The Structure and Properties of Chromium Nitride Coatings Deposited Using DC, Pulsed DC and Modulated Pulse Power Magnetron Sputtering," Surf. Coat. Tech., 204 [14] 2230-39 (2010). https://doi.org/10.1016/j.surfcoat.2009.12.013
- S. Y. Chun "Microstructure and Mechanical Properties of Nanocrystalline TiN Films Through Increasing Substrate Bias (in Korean)," J. Kor. Ceram. Soc., 47 [6] 479-84 (2010). https://doi.org/10.4191/KCERS.2010.47.6.479
- I. Petrov, P. B. Barna, L. Hultman, and J. E. Greene, "Microstructural Evolution During Film Growth," J. Vac. Sci. Tech. A, 21 [5] 774-56 (2003).
- H. C. Barshilia and K. S. Rajam, "Reactive Sputtering of Hard Nitride Coatings Using Asymmetric Bipolar Pulsed DC Generator," Surf. Coat. Tech., 201 [3] 1827-35 (2006). https://doi.org/10.1016/j.surfcoat.2006.03.012
- Y. Zhang, C. Yan, F. Wang, H. Lou, and C. Cao, "Study on the Environmentally Friendly Anodizing of AZ91D Magnesium Alloy," Surf. Coat. Tech., 161 [1] 36-43 (2002). https://doi.org/10.1016/S0257-8972(02)00342-0
-
S. W. Kim, D. M. Kim, S. H. Kang, H. J. Kim, and H. T. Kim, "Hardness of Constituent Phases in
$Ti(C_{0.7}N_{0.3})$ -WC-Ni Cermets Measured by Nanoindentation (in Korean)," J. Kor. Ceram. Soc., 46 [1] 116-21 (2009). https://doi.org/10.4191/KCERS.2009.46.1.116
피인용 문헌
- Effects of Duty Cycle and Pulse Frequency on the Microstructure and Mechanical Properties of TiAlN Coatings vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.447
- A Study of Characteristic based on Working Pressure of ITO Electrode for Display vol.20, pp.4, 2016, https://doi.org/10.7471/ikeee.2016.20.4.392
- Crystal Structure, Microstructure and Mechanical Properties of NbN Coatings Deposited by Asymmetric Bipolar Pulsed DC Sputtering vol.54, pp.1, 2017, https://doi.org/10.4191/kcers.2017.54.1.02
- DC 마그네트론 스펏터를 이용한 ITO 박막의 실온 증착 및 특성 분석 vol.24, pp.1, 2013, https://doi.org/10.7471/ikeee.2020.24.1.59
- Characteristics of HfN coatings by inductively coupled plasma-assisted magnetron sputtering vol.58, pp.2, 2013, https://doi.org/10.1007/s43207-020-00084-3
- Enhancement of the Corrosion Resistance of CrN Film Deposited by Inductively Coupled Plasma Magnetron Sputtering vol.20, pp.3, 2013, https://doi.org/10.14773/cst.2021.20.3.112