DOI QR코드

DOI QR Code

Computer based FEM stabilization of oxygen transport model for material and energy simulation in corroding reinforced concrete

  • Hussain, Raja Rizwan (Department of Civil Engineering, College of Engineering at King Saud University)
  • Received : 2012.05.19
  • Accepted : 2013.07.30
  • Published : 2013.11.25

Abstract

This paper unveils a new computer based stabilization methodology for automated modeling analysis and its experimental verification for corrosion in reinforced concrete structures under the effect of varying oxygen concentration. Various corrosion cells with different concrete compositions under four different environmental conditions (air dry, submerged, 95% R.H and alternate wetting-drying) have been investigated under controlled laboratory conditions. The results of these laboratory tests were utilized with an automated computer-aided simulation model. This model based on mass and energy stabilization through the porous media for the corrosion process was coupled with modified stabilization methodology. By this coupling, it was possible to predict, maintain and transfer the influence of oxygen concentration on the corrosion rate of the reinforcement in concrete under various defined conditions satisfactorily. The variation in oxygen concentration available for corrosion reaction has been taken into account simulating the actual field conditions such as by varying concrete cover depth, relative humidity, water-cement ratio etc. The modeling task has been incorporated by the use of a computer based durability model as a finite element computational approach for stabilizing the effect of oxygen on corrosion of reinforced concrete structures.

Keywords

References

  1. Eymard, R.,Gallouet, T. and Herbin, R. (2000), "Handbook of Numerical Analysis", Finite volume methods, 7(3), 731-1018.
  2. Eymard, R., Gallouet, T., Herbin, R. and Michel, A. (2002), Convergence of a finite volume scheme for nonlinear degenerate parabolic equations, Numer. Math., 92(1), 41-82. https://doi.org/10.1007/s002110100342
  3. Hussain, R.R. (2011a), "Enhanced mass balance Tafel slope model for computer based FEM computation of corrosion rate of steel reinforced concrete coupled with CO2 transport", Comput. Concr., 8(2), 177-192 https://doi.org/10.12989/cac.2011.8.2.177
  4. Hussain, R.R. (2011b), "Effect of moisture variation on oxygen consumption rate of corroding steel in chloride contaminated concrete", Cement Concrete Compos., 33(1), 154-161. https://doi.org/10.1016/j.cemconcomp.2010.09.014
  5. Hussain, R.R. and Ishida, T. (2011a), "Computer-aided oxygen transport model of mass and energy simulation for corrosion of reinforced steel", Autom. Construct. J., 20(5), 559-570. https://doi.org/10.1016/j.autcon.2010.11.022
  6. Hussain, R.R. and Ishida, T. (2011b), "Enhanced electro-chemical corrosion model for reinforced concrete under severe coupled environmental action of chloride andtemperature", Construct. Build. Mater. J., 25(3), 1305-1315. https://doi.org/10.1016/j.conbuildmat.2010.09.014
  7. Hussain, R.R. and Ishida, T. (2010a), "Influence of connectivity of concrete pores and associated diffusion of oxygen on corrosion of steel under high humidity", Construct. Build Mater., 24(6), 1014-1019. https://doi.org/10.1016/j.conbuildmat.2009.11.017
  8. Hussain, R.R. and Ishida, T. (2010b), "Development of numerical model for FEM computation of oxygen transport through Porous media coupled with micro-cell corrosion model of steel in concrete structures", Comput. Struct. J., 88(9-10), 639-647. https://doi.org/10.1016/j.compstruc.2010.02.008
  9. Hussain, R.R. and Ishida, T. (2007), Modeling of corrosion in RC structures under variable chloride environment based on thermodynamic electro-chemical approach, Journal of SSMS, JAPAN, SMS07-106, 3, 104-113. (Best paper award for the last four years 2005-2009)
  10. Ishida. T. and Maekawa, K. (2000), "Modeling of pH profile in pore water based on mass transport and chemical equilibrium theory", Proceedings of JSCE, No.648/V-47.
  11. Ishida T. and Maekawa, K. (1999), "An integrated computational system for mass/energy generation, Transport, and Mech. Mater. Struct, Journal of JSCE, No.627/V-44.
  12. Ishida, T. (1999), An integrated computational system of mass/energy generation, transport and mechanics of materials and structures, Thesis Ph.D, University of Tokyo, Japan.
  13. Kurahashi, T. and Oshita, H. (2010), Shape determination of 3-D reinforcement corrosion in concrete based on observed temperature on concrete surface, Comput. Concr., 7(1),63-81. https://doi.org/10.12989/cac.2010.7.1.063
  14. Maekawa, K., Chaube, R. and Kishi, T. (1999a), Modeling of concrete performance, E & FN Spon, NY.
  15. Maekawa, K., Chaube, R. and Kishi, T. (1999b), Modeling of Concrete performance, E&FN Spon NY.
  16. Papadakis, V.G., Vayenas, C.G. and Fardis, M.N. (1991), "Fundamental modeling and experimental investigation of concrete carbonation", ACI Mater. J., 88(4), 363-373.
  17. Rui, H. (2008), "A conservative characteristic finite volume method for solution of the advection-diffusion equation", Comput. Methods Appl. Mech. Engrg., 197(45-48), 3862-3869. https://doi.org/10.1016/j.cma.2008.03.013
  18. Raupach, M. (1996.), "Investigations on the influence of oxygen on corrosion of steel in Concrete-Part 1", Mater. Struct., 29, 174-184, https://doi.org/10.1007/BF02486163
  19. Scheiner, S. and Christian, H. (2009), "Finite volume model for diffusion- and activation-controlled pitting corrosion of stainless steel", Comput. Meth. Appl. Mech. Eng., 198(37-40), 2898-2910. https://doi.org/10.1016/j.cma.2009.04.012
  20. Scheiner, S. and Hellmich, C. (2007), "Stable pitting corrosion of stainless steel as diffusion-controlled dissolution process with a sharp moving electrode boundary", Corrosion Science, 49(2), 319-346. https://doi.org/10.1016/j.corsci.2006.03.019
  21. Welty, J.R., Wicks, C.E. and Wilson, R.E. (1969), Fundamentals of momentum heat and mass transfer, John Wiley & Sons, Inc.

Cited by

  1. The effect of microscopic cracks on chloride diffusivity of recycled aggregate concrete vol.170, pp.None, 2013, https://doi.org/10.1016/j.conbuildmat.2018.03.045