동력기계공학회지 (Journal of Power System Engineering)

  • 제17권5호
  • /
  • Pages.78-85
  • /
  • 2013
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

Study on the heat transfer properties of raw and ground graphene coating on the copper plate

  • Lee, Sin-Il (Department of Energy and Mechanical Engineering, Institute of Marine Industry, Gyeongsang National University) ;
  • Tanshen, Md.R. (Department of Energy and Mechanical Engineering, Institute of Marine Industry, Gyeongsang National University) ;
  • Lee, Kwang-Sung (Department of Energy and Mechanical Engineering, Institute of Marine Industry, Gyeongsang National University) ;
  • Munkhshur, Myekhlai (Department of Energy and Mechanical Engineering, Institute of Marine Industry, Gyeongsang National University) ;
  • Jeong, Hyo-Min (Department of Energy and Mechanical Engineering, Institute of Marine Industry, Gyeongsang National University) ;
  • Chung, Han-Shik (Department of Energy and Mechanical Engineering, Institute of Marine Industry, Gyeongsang National University)
  • 투고 : 2013.08.21
  • 심사 : 2013.10.07
  • 발행 : 2013.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A high thermal conductivity material, namely graphene is treated by planetary ball milling machine to transport the heat by increasing the temperature. Experiments were performed to assess the heat transfer enhancement benefits of coating the bottom wall of copper substrate with graphene. It is well known that the graphene is unable to disperse into base fluid without any treatment, which is due to the several reasons such as attachment of hydrophobic surface, agglomeration and impurity. To further improve the dispersibility and thermal characteristics, planetary ball milling approach is used to grind the raw samples at optimized condition. The results are examined by transmission electron microscopy, x-ray diffraction, Raman spectrometer, UV-spectrometer, thermal conductivity and thermal imager. Thermal conductivity measurements of structures are taken to support the explanation of heat transfer properties of different samples. As a result, it is found that the planetary ball milling approach is effective for improvement of both the dispersion and heat carriers of carbon based material. Indeed, the heat transfer of the ground graphene coated substrate was higher than that of the copper substrate with raw graphene.

키워드

참고문헌

  1. Eric A. Silk, Eric L. Golliher, R. Paneer Selvam. Energy Conversion Management. 49 (2008) 453-468. https://doi.org/10.1016/j.enconman.2007.07.046
  2. Theresa Pistochini, Mark Modera. Energy and Buildings. 43 (2011) 631-638. https://doi.org/10.1016/j.enbuild.2010.11.004
  3. B. Munkhbayar, Md. J. Nine, S. Hwang, J. Kim, K. Bae, H. Chung, H. Jeong. Chem Eng Proc. 61 (2012) 36-41.
  4. Saeed Zeinali Heris. Int Comm Heat Mass Transfer. 38 (2011) 1470-1473. https://doi.org/10.1016/j.icheatmasstransfer.2011.08.004
  5. Madhusree Kole, T.K. Dey. Int J Thermal Sci. 50 (2011) 1740-1747.
  6. B. Munkhbayar, S. Hwang, J. Kim, K. Bae, M. Ji, H. Chung, H. Jeong. Electrochimica Acta. 80 (2012) 100-107. https://doi.org/10.1016/j.electacta.2012.06.127
  7. J. Ali, A. Kumar, S. Husain, M. Husain. Nanosci Nanotechnol Lett. 3 (2011) 175-180. https://doi.org/10.1166/nnl.2011.1141
  8. Huaqing Xie, Lifei Chen. Physics Letters A. 373 (2009) 1861-1864. https://doi.org/10.1016/j.physleta.2009.03.037
  9. Liu Yang, Kai Du. Int J Refrigeration. 35 (2012) 1978-1988. https://doi.org/10.1016/j.ijrefrig.2012.07.013
  10. B. Munkhbayar. Munkhjargal Bat-Erdene, B. Ochirkhuyag, D. Sarangerel, B. Battsengel, H. Chung, H. Jeong. Materials Research Bulletin. 47 (2012) 4187-4196. https://doi.org/10.1016/j.materresbull.2012.08.073
  11. K. S. Novoselov, A. K. Geim, S. V. Morozov, D. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva, A. A. Firsov, Science. 306 (2004) 666-669. https://doi.org/10.1126/science.1102896
  12. E. J. Yoo, J. Kim, E. Hosono, H. S. Zhou, T. Kudo, I. Honma, Nano Lett. 8 (2008) 2277-2282. https://doi.org/10.1021/nl800957b
  13. M. D. Stoller, S. Park, Z. Yanwu, J. An, R. S. Ruoff, Nano Lett. 8 (2008) 3498-3502. https://doi.org/10.1021/nl802558y
  14. M.Y. Yen, M.C. Hsiao, S.H. Liao, P.I. Liu, H.M. Tsai, C.C.M. Ma, N.W. Pu, M.D. Ger, Carbon. 49 (2011) 3597-3606. https://doi.org/10.1016/j.carbon.2011.04.062
  15. S.P. Jang, S.U.S. Choi, Applied Physics Letters 84 (2004) 4316-4318. https://doi.org/10.1063/1.1756684