참고문헌
- S. Ukai, T. Okuda, M. Fujiwara, T. Kobayashi, S. Mizuta, and H. Nakashima, "Characterization of High Temperature Creep Properties in Recrystallized 12Cr-ODS Ferritic Steel Claddings," J. Nucl. Sci. Technol., vol. 39, pp. 872-879 (2002). https://doi.org/10.1080/18811248.2002.9715271
- H.S. Cho, H. Ohkubo, N. Iwata, A. Kimura, S. Ukai, and M. Fujiwara, "Improvement of compatibility of advanced ferritic steels with super critical pressurized water toward a higher thermally efficient water-cooled blanket system," Fusion Eng. Design, vol. 81, pp. 1071-1076 (2006). https://doi.org/10.1016/j.fusengdes.2005.09.056
- Y. Yamashita, N. Akasaka, S. Ukai, and S. Ohnuki, "Microstructural development of a heavily neutron-irradiated ODS ferritic steel (MA957) at elevated temperature," J. Nucl. Mater., vol. 367-370, pp. 202-207 (2007). https://doi.org/10.1016/j.jnucmat.2007.03.145
- S. Ohtsuka, S. Ukai, H. Sakasegawa, M. Fujiwara, T. Kaito, and T. Narita, "Nano-mesoscopic structural characteriazation of 9Cr-ODS martensitic steel for improving creep strength," J. Nucl. Mater., vol. 367-370, pp. 160-165 (2007). https://doi.org/10.1016/j.jnucmat.2007.03.004
- A.T. Price, "Rupture ductility of creep resistant steels," The Inst. of Metals, London, Book No.522, p. 246 (1991).
- S. Ohtsuka, S. Ukai , M. Fujiwara, and T. Kaito, T. Narita, "Improvement of creep strength of 9Cr-ODS martensitic steel by controlling excess oxygen and titanium concentration," Mater. Trans., vol. 46(3), pp. 487-492 (2005). https://doi.org/10.2320/matertrans.46.487
-
S. Kim, S. Ohtsuka, T. Kaito, S. Yamashita, M. Inoue, T. Asayama, and T. Shobu, "Formation of nano-oxide particles and
${\delta}$ -ferritie at elevated temperature in 9Cr-ODS steel," J. Nucl. Mater., vol. 417, pp. 209-212 (2011). https://doi.org/10.1016/j.jnucmat.2011.01.063 -
M. Yamamoto, S. Ukai, S. Hayashi, T. Kaito, and S. Ohtsuka, "Reverse phase transformation form
${\alpha}$ to${\gamma}$ in 9Cr-ODS ferritic steels," J. Nucl. Mater., vol. 417, pp. 237-240 (2011). https://doi.org/10.1016/j.jnucmat.2010.12.250 - M.J. Alinger, G.R. Odette, and D.T. Hoelzer, "The development and stability of Y-Ti-O nanoclusters in mechanical alloyed Fe-Cr based ferritic alloys," J. Nucl. Mater., vol. 329-333, pp. 382-386 (2004). https://doi.org/10.1016/j.jnucmat.2004.04.042
- Y. Yazawa, T. Furuhara, and T. Maki, "Effect of matrix recrystallization on morphology, crystallography and coarsening behavior of vanadium carbide in austenite," Acta Metall., vol. 52, pp. 3727-3736 (2004).
- S. Ukai, S. Ohtsuka, T. Kaito, H. Sakasegawa, N. Chikata, S. Hayashi, and S. Ohnuki, "High-temperature strength characterization of advanced 9Cr-ODS ferritic steels," Mater. Sci. Eng. A, vol. 510-511, pp. 115-120 (2009). https://doi.org/10.1016/j.msea.2008.04.126
피인용 문헌
- Effect of thermal ageing on mechanical properties of a high-strength ODS alloy vol.30, pp.10, 2016, https://doi.org/10.1007/s12206-016-0906-y
- Surface and Tribological Characteristics of Air-cooled and Oil-cooled AISI 4140 Steel vol.32, pp.5, 2016, https://doi.org/10.9725/kstle.2016.32.5.160
- ODS alloy with addition of Ni by means of Arc plasma sintering (APS) method vol.432, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/432/1/012009
- Effect of heat treatment on microstructure behavior and hardness of EN 8 steel vol.377, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/377/1/012065