DOI QR코드

DOI QR Code

Development and validation of a numerical model for steel roof cladding subject to static uplift loads

  • Lovisa, Amy C. (School of Engineering and Physical Sciences, James Cook University) ;
  • Wang, Vincent Z. (School of Engineering and Physical Sciences, James Cook University) ;
  • Henderson, David J. (Cyclone Testing Station, James Cook University) ;
  • Ginger, John D. (School of Engineering and Physical Sciences, James Cook University)
  • 투고 : 2012.08.10
  • 심사 : 2013.07.09
  • 발행 : 2013.11.25

초록

Thin, high-strength steel roof cladding is widely used in residential and industrial low-rise buildings and is susceptible to failure during severe wind storms such as cyclones. Current cladding design is heavily reliant on experimental testing for the determination of roof cladding performance. Further study is necessary to evolve current design standards, and numerical modelling of roof cladding can provide an efficient and cost effective means of studying the response of cladding in great detail. This paper details the development of a numerical model that can simulate the static response of corrugated roof cladding. Finite element analysis (FEA) was utilised to determine the response of corrugated cladding subject to a static wind pressure, which included the anisotropic material properties and strain-hardening characteristics of the thin steel roof cladding. The model was then validated by comparing the numerical data with corresponding experimental test results. Based on this comparison, the model was found to successfully predict the fastener reaction, deflection and the characteristics in deformed shape of the cladding. The validated numerical model was then used to predict the response of the cladding subject to a design cyclone pressure trace, excluding fatigue effects, to demonstrate the potential of the model to investigate more complicated loading circumstances.

키워드

참고문헌

  1. Beck, V. (1975), Appraisal of roof cladding under dynamic wind loading - Cyclone Tracy Darwin 1974: Appendix 4, Report on Cyclone Tracy - Effect on buildings - Dec 1974, (Ed. G. Walker), Australian Department of Housing and Construction.
  2. Beck, V. and Stevens, L. (1979), "Wind loading failures of corrugated roof cladding", Civil Eng. Transactions, IE Australia, 21(1), 45-46.
  3. Dassault Systems (2012), Abaqus example problems manual, Dassault Systems Simulia Corp, USA.
  4. Experimental Building Station (EBS) (1978), TR440 - Guidelines for the testing and evaluation of products for cyclone prone areas, Sydney, Australia.
  5. Henderson, D.J. (2010), Response of pierced fixed metal roof cladding to fluctuating wind loads, Ph.D. Thesis. Townsville (Australia), James Cook University.
  6. Henderson, D.J. and Ginger J.D. (2005), "Fatigue failure of roof components subjected to wind loading", Proceedings of the Australian Structural Engineering Conference, Newcastle (Australia), September.
  7. Henderson, D.J. and Ginger J.D. (2011), "Response of pierced fixed corrugated steel roofing systems subjected to wind loads", Eng. Struct., 33(12), 3290 -3298. https://doi.org/10.1016/j.engstruct.2011.08.020
  8. Henderson, D.J., Ginger J.D. and Morrison M. (2009), "Simulated tropical cyclonic winds for low cycle fatigue loading of steel rofing", Wind Struct., 12 (4), 383-400. https://doi.org/10.12989/was.2009.12.4.383
  9. Holmes, J.D. (2007), Wind loading of structures, 2nd Ed., Taylor and Francis, New York.
  10. Jancauskas, E.D., Mahendran, M. and Walker, G.R. (1994), "Computer simulation of the fatigue behaviour of roof cladding during the passage of a tropical cyclone", J. Wind Eng. Ind. Aerod., 51(2), 215-227. https://doi.org/10.1016/0167-6105(94)90005-1
  11. Leicester, R.H. and Reardon, G.F. (1976), Wind damage in Australia: A pictorial review with particular reference to domestic and other low rise structures. CSIRO Division of Building Research, Victoria (Australia).
  12. Lovisa, A.C., Wang, V.Z., Henderson, D.J. and Ginger, J.D. (2012), "A finite element model for pierced-fixed, corrugated metal roof cladding subject to uplift wind loads", Proceedings of the Australasian Structural Engineering Conference, Perth, Australia, July.
  13. Lucas, R.M., Al-Bermani, F.G.A. and Kitipornchai, S. (1997a), "Modelling of cold-formed purlin-sheeting systems - Part 1: full model", Thin Wall. Struct., 27(3), 223-243 https://doi.org/10.1016/S0263-8231(96)00038-9
  14. Lucas, R.M., Al-Bermani, F.G.A. and Kitipornchai, S. (1997b), "Modelling of cold-formed purlin-sheeting systems - Part 2. simplified model", Thin Wall. Struct., 27(4), 263-286 https://doi.org/10.1016/S0263-8231(96)00039-0
  15. Mahaarachchi, D. and Mahendran, M. (2004), "Finite element analysis and design of crest-fixed trapezoidal steel claddings with wide pans subject to pull- through failures", Eng. Struct., 26(11), 1547-1559. https://doi.org/10.1016/j.engstruct.2004.05.007
  16. Mahaarachchi, D. and Mahendran, M. (2009a), "Wind Uplift Strength of trapezoidal steel cladding with closely spaced ribs", J. Wind Eng. Ind. Aerod., 97 (3-4), 140-150. https://doi.org/10.1016/j.jweia.2009.03.002
  17. Mahaarachchi, D. and Mahendran, M. (2009b), "A strain criterion for pull-through failures in crest-fixed steel claddings", Eng. Struct., 31(2), 498-506. https://doi.org/10.1016/j.engstruct.2008.09.013
  18. Mahendran, M. (1989), Fatigue behaviour of corrugated rooding under cyclic wind loading, Cyclone testing station technical report 35, James Cook University, Townsville (Australia).
  19. Mahendran, M. (1990a), "Fatigue behaviour of corrugated roofing under cyclic wind loading", Civil Eng. Transactions, IE Australia, 32(4), 219-226.
  20. Mahendran, M. (1990b), "Static behaviour of corrugated roofing under simulated wind loading", Civil Eng. Transactions, IE Australia, 32(4), 211-218.
  21. Mahendran, M. (1994a), "Steel roof claddings under simulated cyclonic wind forces", Civil Eng. Transactions, I.E. Australia, 36(1), 1-9.
  22. Mahendran, M. (1994b), "Behaviour and design of crest-fixed profiled steel roof claddings under wind uplift", Eng. Struct., 16(5), 368-376. https://doi.org/10.1016/0141-0296(94)90030-2
  23. Mahendran, M. (1995), "Appropriate fatigue loading sequence for roof claddings", Eng. Struct., 17(7), 476-484. https://doi.org/10.1016/0141-0296(95)00049-D
  24. Melbourne, W.H. (1977), "Loading cycles for simulation of wind loading", Proceedings of the Workshop on Guidelines for Cyclone Product Resting and Evalutation, Experimental Building Station, Department of Construction, Sydney, July.
  25. Morgan, J.W. and Beck, V.R. (1977), "Failure of sheet-metal roofing under repeated wind loading", Civil Eng. Transactions, I.E. Australia, 19(1), 1-5.
  26. Port Kembla Technical Services (2007), Tensile testing result summary, Bluescope Steel, Port Kembla (Australia).
  27. Potts, D. and Zdravkovic, L. (2001), Finite element analysis in geotechnical engineering: application, Thomas Telford, London.
  28. Rogers, C.A. and Hancock, G.J. (1997), "Ductility of G550 sheet steels in tension", J. Struct. Eng. - ASCE, 123(12), 1586-1594. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1586)
  29. Standards Australia (2002), Self drilling screws for the building and construction industries, Australian Standard AS3566-2002, Standards Australia, Sydney, New South Wales (Australia).
  30. Standards Australia (2010), AS1720.1-2010: timber structures - design methods, Australian Standard AS1720.1-2010, Standards Australia, Sydney, New South Wales (Australia).
  31. Walker, G. (1975), Report on cyclone tracy - effects on buildings - Dec 1974, Australian Department of Housing and Construction, Melbourne (Australia).
  32. Walker, G.R. (1980), "A review of the impact of Cyclone Tracy on Australian building regulations and practice", Civil Eng. Transactions, I.E. Australia, 22(2), 100-107.
  33. Walker, G.R. (2007), The birth of the cyclone testing station - personal recollections, Prepared as a Contribution to the 30th Anniversary Celebrations of the Founding of the Station in November 1977, James Cook University.
  34. Walker, G.R., Minor, J.E. and Marshall, R.D. (1975), "The Darwin Cyclone - valuable lessons in structural design", Civil Eng. - ASCE, 45(12), 82-86.
  35. Xu, Y.L. (1993), Wind-induced fatigue loading on roof cladding of low-rise buildings, Cyclone testing station technical report 41, James Cook University, Townsville (Australia).
  36. Xu, Y.L. (1995), "Fatigue performance of screw-fastened light-guage-steel roofing sheets", J. Struct. Eng. - ASCE, 121(3), 389-398. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(389)
  37. Xu, Y.L. and Reardon, G.F. (1993), "Test of screw fastened profiled roofing sheets subject to simulated wind uplift", Eng. Struct., 15(6), 423-430. https://doi.org/10.1016/0141-0296(93)90060-H
  38. Xu, Y.L. and Teng, J.D. (1994), "Local plastic failure of light gauge steel roofing sheets: finite element analysis versus experiment", J. Constr. Steel Res., 30(2), 125-150. https://doi.org/10.1016/0143-974X(94)90047-7

피인용 문헌

  1. Damage Analysis and Evaluation of Light Steel Structures Exposed to Wind Hazards vol.7, pp.3, 2017, https://doi.org/10.3390/app7030239
  2. Dynamic characteristics and wind-induced vibration coefficients of purlin-sheet roofs vol.22, pp.5, 2016, https://doi.org/10.12989/scs.2016.22.5.1039