DOI QR코드

DOI QR Code

Combustion Control through the DME Injection Timing in the Hydrogen-DME Partially Premixed Compression Ignition Engine

DME 분사 시기 조절을 통한 수소-DME 부분 예혼합 압축착화 연소 제어

  • Received : 2012.12.04
  • Accepted : 2013.03.22
  • Published : 2013.03.31

Abstract

Hydrogen-dimethy ether(DME) partially premixed compression ignition(PCCI) engine combustion was investigated in a single cylinder compression ignition engine. Hydrogen and DME were used as low carbon alternative fuels to reduce green house gases and pollutant. Hydrogen was injected at the intake manifold with an injection pressure of 0.5 MPa at fixed injection timing, $-210^{\circ}CA$ aTDC. DME was injected directly into the cylinder through the common-rail injection system at injection pressure of 30 MPa. DME inejction timing was varied to find the optimum PCCI combustion to reduce CO, HC and NOx emissions. When DME was injected early, CO and HC emissions were high while NOx emission was low. As the DME injection was retarded, the CO and HC emissions were decreased due to high combustion efficiency. NOx emissions were increased due to the high in-cylinder temperature. When DME were injected at $-30^{\circ}CA$ aTDC, reduction of HC, CO and NOx emissions was possible with high value of IMEP.

Keywords

References

  1. Verhelst S, Wallner T, Hydrogen-fueled internal combustion engines. Int J Hydrogen Energy 2009; 35: 490-527
  2. White CM, Steeper RR, Lutz AE, The hydrogenfueled internal combustion engine: a technical review, Int J Hydrogen Energy 2006;32:1292-1305
  3. Akagawa H, Miyamoto T, Harada A, Sasaki S, Shimazaki N, Hakeshi T, Approaches to solve pro blems of the premixed lean diesel combustion control, SAE Technical Paper, 1999-01-0183, 1999, DOI: 10.4271/1999-01-0183
  4. Kook S, BAE C, Combustion control using two- Stage diesel fuel injection in a single-cylinder PCCI engine, SAE Technical Paper 2004-01-0938, 2004, DOI: 10.4271/2004-01-0938
  5. Szwaja S, Grab-Rogalinski K, Hydrogen combustion in a compression ignition diesel engine. Int J Hydrogen Energy 2009;24:4413-4421
  6. Narioka Y, Yokoyama T, Lio S, Takagi Y, HCCI combustion characteristics of hydrogen and hydrogen- rich natural gas reforme supported by DME supplement. SAE Technical Paper, 2006-01-0628, 2006, DOI: 10.4271/2006-01-0628
  7. Inagaki K, Fuyuto T, Nishikawa K, Nakakita K, Dual-fuel PCI combustion controlled by in-cylinder stratification, SAE Technical Paper 2006-01- 0028, 2006, DOI: 10.4271/2006-01-0028
  8. Shudo T, Ono Y, HCCI combustion of hydrogen, carbon monoxide and dimethyl ether, SAE Technical Paper, 2002-01-0112, 2002, DOI: 10.4271/2002- 01-0112
  9. Guo H, Hosseini V, Neill WS, Chippior WL, An experimental study on the effect of hydrogen enrichment on diesel fueled HCCI combustion. Int J Hydrogen Energy 2011;36:13820-13830 https://doi.org/10.1016/j.ijhydene.2011.07.143
  10. Yeom K, Jang J, Bae C, Homogeneous charge compression ignition of LPG and gasoline using variable valve timing in an engine, Fuel, 2007, Vol 86, No 4, pp 494-503 https://doi.org/10.1016/j.fuel.2006.07.027
  11. Yeom K, Bae C, Gasoline-di-methyl ether homogeneous charge compression ignition engine, Energy and fuels, 2007, Vol 21, No 4, pp1942-1949 https://doi.org/10.1021/ef070076h
  12. Arcoumanis C, Bae C, Crookes R, Kinoshita E, The potential of di-methyl ether(DME) as an alternative fuel for compression-ignition engines: A review. Fuel, Vol 87, No 7, pp 1014-1030, 2008. https://doi.org/10.1016/j.fuel.2007.06.007
  13. Park CH, Kim KS, Jun JW, Cho SY, Lee YK, Thermodynamic Analysis of DME Steam Reforming for Hydrogen Production, J. Korean Ind. Eng. Chem., Vol. 20, No. 2, April 2009, 186-190, 186
  14. Heywood JB, Internal combustion engine fundamentals, McGraw-Hill (1998).
  15. Woschni G, A Universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE Technical Paper 670931 1967, DOI: 10.4271/670931
  16. Shudo T Yamada H, Hydrogen as an ignition-controlling agent for HCCI combustion engine by suppressing the low-temperature oxidation. Int J of Hydrogen Energy 2007;32:3066-3072 https://doi.org/10.1016/j.ijhydene.2006.12.002
  17. Imuta T, Hata R, Tsujimura T, Tokunaga Y, Senda J, Fujimoto H, Combustion method of diesel engine fueled with hydrogen for high efficiency, COMODIA 2008, FL1-2