DOI QR코드

DOI QR Code

양이온성으로 표면 개질된 nanocoated GCC의 보류 성능

Retention Performance of Nanocoated GCC with Positive Charge

  • 이제곤 (서울대학교 농업생명과학대학 산림과학부) ;
  • 심규정 (서울대학교 농업생명과학대학 산림과학부) ;
  • 이학래 (서울대학교 농업생명과학대학 산림과학부) ;
  • 윤혜정 (서울대학교 농업생명과학대학 산림과학부)
  • Lee, Jegon (Dept. of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Sim, Kyujeong (Dept. of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Lee, Hak Lae (Dept. of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Youn, Hye Jung (Dept. of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University)
  • 투고 : 2013.10.01
  • 심사 : 2013.10.19
  • 발행 : 2013.10.30

초록

In this study, we investigated retention characteristics of nanocoated GCC that was positively modified by Layer-by-Layer (LbL) multilayering process. Three layers were formed onto GCC particles with poly-DADMAC/PSS/poly-DADMAC (PD3) and C-starch/A-PAM/C-starch (CS3) systems, respectively. Untreated GCC, PD3 GCC (strongly positive charge) and CS3 GCC (weekly positive charge) were retained on pulp fibers under single retention system or microparticle retention system conditions. In single retention system, PD3 particles were not affected by cationic retention aid due to their strong positive charge, whereas CS3 particles reacted with cationic retention aid due to anionic sites on the surface of the weekly positive particles. In a microparticle retention system, positively modified GCC (PD3 and CS3) showed higher retention level than untreated GCC at the same dosage of retention aid. The cationic surface of GCC particles were more reacted with bentonite so the deposition onto pulp fibers was improved. In addition, the retention level of nanocoated GCC was increased with maintaining good formation.

키워드

참고문헌

  1. Krogerus, B., Fillers and pigments, in Papermaking Chemistry, Neimo L.(ed.), Papermaking Science and Technology Ser. Vol. 4, Fapet Oy, Finland, p.119 (1999).
  2. Brown, R., A review of the influence of pigments on papermaking and coating, 1997 Transactions of the 11th Fundamental Research Symp. Vol. 1, pp. 83-138.
  3. Andersson, K., Sandstrom, A., Strom, K., and Barla, P., The use of cationic starch and colloidal silica to improve the drainage characteristics of kraft pulps, Nordic Pulp Paper Res. J. 1(2):26-30 (1986).
  4. Carre, B., Starch and alumina/silica based compounds as a microparticulate retention aid system, Nordic Pulp Paper Res. J. 8(1):21-26 (1993). https://doi.org/10.3183/NPPRJ-1993-08-01-p021-026
  5. Bernier, J. F., and Begin, B., Experience of a microparticle retention aid system, Tappi J. 77(11):217-224 (1994).
  6. Asselman, T., Alince, B., Garnier, G., and van de Ven, T. G. M., Mechanism of polyacrylamide-bentonite microparticulate retention aids, Nordic Pulp Paper Res. J. 15(5):515-519 (2000). https://doi.org/10.3183/NPPRJ-2000-15-05-p515-519
  7. Svedberg, A., and Lindstrom, T., The effect of various retention aids on retention and formation, Nordic Pulp Paper Res. J. 25(2):195-203 (2010). https://doi.org/10.3183/NPPRJ-2010-25-02-p195-203
  8. Svedberg, A., and Lindstrom, T., Improvement of the retention-formation relationship using three-component retention aid systems, Nordic Pulp Paper Res. J. 27(1):86-92 (2012). https://doi.org/10.3183/NPPRJ-2012-27-01-p086-092
  9. Mabee, S., and Harvey, R., Filler flocculation technology - Increasing sheet filler content without loss in strength or runnability parameters, 2000 TAPPI Papermakers Conference and Trade Fair, pp. 797-810.
  10. Lee, K. H., and Lee, H. L., Preflocculation of GCC with cationic PAM and cationic starch and the influence of their dosage and shear rate on prefloc size, Journal of Korea TAPPI 38(4):1-9 (2006).
  11. Seo, D., Im, W. H., Youn, H. J., and Lee, H. L., The effects of process variables for GCC pre-flocculation on floc and handsheet properties, Nordic Pulp Paper Res. J. 27(2):382-387 (2012). https://doi.org/10.3183/NPPRJ-2012-27-02-p382-387
  12. Im, W., Lee, H. L., Youn, H. J., and Seo, D., Structure characterization of ground calcium carbonate flocs by fractal analysis and their effects on handsheet properties, Tappi J. 12(3):17-23 (2013).
  13. Zhao, Y. L., Hu, Z. S., Ragauskas, A., and Deng, Y. L., Improvement of paper properties using starch-modified precipitated calcium carbonate filler, Tappi J. 4(2):3-7 (2005).
  14. Yoon, S. Y., and Deng, Y., Starch-fatty complex modified filler for papermaking, Tappi J. 5(9):3-9 (2006).
  15. Choi, D.-C., Choi, E.-Y., Won, C. M., and Cho, B.-U., Paper strength improvement by anionic PAM and cationic starch adsorbed PCC, Journal of Korea TAPPI 45(1):59-66 (2013). https://doi.org/10.7584/ktappi.2013.45.1.059
  16. Lee, J., Ryu, J., Sim, K., Ahn, J., Lee, H. L., and Youn, H. J., Preliminary study on properties of Layer-by-Layer assembled GCC with polyelectrolytes, Journal of Korea TAPPI 43(3):35-42 (2011).
  17. Ahn, J., Lee, J., Lee, H. Y., Youn, H. J., and Lee, H. L., Modification of GCC with Poly-DADMAC and PSS with different molecular weights and its effect on the paper properties, Journal of Korea TAPPI 44(5):21-31 (2012). https://doi.org/10.7584/ktappi.2012.44.5.021
  18. Lee, J., Youn, H. J., Ahn, J., Ryu, J., Sim, K., and Lee, H. L., Bonding between cellulose fibers and ground calcium carbonate with polyelectolyte multilayer, 2012 Proceeding of Spring Conference of KTAPPI, pp. 143-149.
  19. Ahn, J., Youn, H. J., Lee, J., Sim, K., Lee, H. Y., and Lee, H. L., Improvement of paper properties through LbL (Layer-by-Layer) multilayering of ground calcium carbonate with polyelectrolytes combination, 2012 Proceeding of Fall Conference of KTAPPI, pp. 117-124.
  20. Hubbe, M. A., Mechanistic aspects of microparticle systems, Tappi J. 4(11):23-28 (2005).

피인용 문헌

  1. 전단 조건이 중질탄산칼슘의 무세척 고분자전해질 다층흡착 처리에 미치는 영향 vol.46, pp.5, 2013, https://doi.org/10.7584/ktappi.2014.46.5.051
  2. Strengthening effect of polyelectrolyte multilayers on highly filled paper vol.33, pp.1, 2013, https://doi.org/10.1515/npprj-2018-3010