Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

SAFETY ANALYSIS METHODOLOGY FOR AGED CANDU® 6 NUCLEAR REACTORS

  • Received : 2013.08.18
  • Published : 2013.10.25
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with the Safety Analysis for $CANDU^{(R)}$ 6 nuclear reactors as affected by main Heat Transport System (HTS) aging. Operational and aging related changes of the HTS throughout its lifetime may lead to restrictions in certain safety system settings and hence some restriction in performance under certain conditions. A step in confirming safe reactor operation is the tracking of relevant data and their corresponding interpretation by the use of appropriate thermal-hydraulic analytic models. Safety analyses ranging from the assessment of safety limits associated with the prevention of intermittent fuel sheath dryout for a slow Loss of Regulation (LOR) analysis and fission gas release after a fuel failure are summarized. Specifically for fission gas release, the thermal-hydraulic analysis for a fresh core and an 11 Effective Full Power Years (EFPY) aged core was summarized, leading to the most severe stagnation break sizes for the inlet feeder break and the channel failure time. Associated coolant conditions provide the input data for fuel analyses. Based on the thermal-hydraulic data, the fission product inventory under normal operating conditions may be calculated for both fresh and aged cores, and the fission gas release may be evaluated during the transient. This analysis plays a major role in determining possible radiation doses to the public after postulated accidents have occurred.

Keywords

References

  1. W. J. Hartmann, "NUCCP (NUCIRC) Predictions of Channel Flow and Comparison with Site Measurements at the Point Lepreau Generating Station": Proceedings of the 13th Annual Reactor Simulation Symposium, Chalk River, Ontario, Canada, April, 1987.
  2. W. J. Hartmann, P. D. Thompson (NBPower), M.R. Soulard (AECL), "Flow Verification Support for the PLGS Startup after the 1995 Outage": Proceedings of the 17th Annual Canadian Nuclear Society Conference, Fredericton, New Brunswick, Canada, June, 1996.
  3. W.J. Hartmann, M. Cormier (AECL), B. Willemsen (NBPower), T. Whynot (NBPower), P. D. Thompson (NBPower), "Plant Ageing Adjustments to Maintain Reactor Power at the Point Lepreau Generating Station": Proceedings of the 5th International Conference on CANDU Maintenance, Toronto, Ontario, Canada, November, 2000.
  4. O. Vagner (HQ), M. Nguyen, G. Hotte, "History of ROP Margins Erosion and Power Recovery at Gentilly-2", Proceedings of the 30th Annual Canadian Nuclear Society Conference, Calgary, Alberta, Canada, June, 2009.
  5. W.J. Hartmann, C. Zeng (TQNPC), J. Feng (TQNPC), "Qinshan CANDU$^{(R)}$ 6 Main Heat Transport System High Operational Performance", Proceedings of the 31st Annual Canadian Nuclear Society Conference, Montreal, Quebec, Canada, May, 2010.
  6. W.J. Hartmann, C. Zeng (TQNPC), J. Feng (TQNPC), X. Mou (TQNPC), "Qinshan CANDU$^{(R)}$ 6 Main Heat Transport System High Accuracy Performance Tracking in Support of Regional Overpower Protection", Proceedings of the 32nd Annual Canadian Nuclear Society Conference, Niagara Falls, Canada, June, 2011.
  7. A. Elalami (AECL), W.J. Hartmann, A. Espahbod, M. Tochaie, "NUCIRC Thermal-Hydraulic Applications in Support of CANDU$^{(R)}$ Plant Design and Operation", Proceedings of the 31st Annual Canadian Nuclear Society Conference, Montreal, Quebec, Canada, May, 2010.
  8. N. Christodoulou (AECL), A.R. Causey, R.A. Holt, C.N. Tome, N. Badie, R.J. Klassen, R. Sauve, and C.H. Woo, "Modeling the in-reactor deformation of Zr-2.5Nb pressure tubes in CANDU power reactors", American Society for Testing and Materials, Special Technical Publication 1295, pp. 518, (1996).
  9. W.J. Hartmann, H. Choi (KHNP), D.J. Wallace (AECL), V. Caxaj, A. Elalami, "CANDU(R) 6 HTS Diagnostic and Adjustment Methodology for Economic and Safety-System Optimization", Proceedings of the 30th Annual Canadian Nuclear Society Conference, Calgary, Alberta, Canada, June, 2009.
  10. T.G. Beuthe and B.N. Hanna, "CATHENA MOD-3.5D/Revision 2 Input Reference", AECL Report, 153-112020-UM-001 (2005).
  11. G.G. Chassie, "ELESTRES-IST: User's Manual", AECL Report, 153-113370-UM-001, Rev. 0 (2006).
  12. S.M. Gehl, "Release of Fission Gas during Transient Heating of LWR Fuel", ANL-80-108, Report from Argonne National Lab. (1981).