DOI QR코드

DOI QR Code

Electromagnetic design of 10 MW class superconducting wind turbine using 2G HTS wire

  • Kim, J.H. (Jeju National University) ;
  • Kim, H.M. (Jeju National University)
  • 투고 : 2013.09.02
  • 심사 : 2013.09.30
  • 발행 : 2013.09.30

초록

This paper introduces design processes of 10 MW class superconducting generator for wind Turbine. Superconducting generator can produce 5 times stronger magnetic field than permanent magnet at least, which enables large scale wind turbine to function as a lighter, smaller and more highly efficient system. These processes are targeted for higher efficiency and shorter high temperature superconductor (HTS) wires to fabricate 10 MW class superconducting generator. Three different approaches will be described in these design processes. First design process focuses on the number of rotor poles. Secondly, 270 and 360 A operating current of superconducting field coil can be adapted as a design parameter in this process. Lastly, 3 and 6 kV line to line voltage of stator coil will be used to design 10 MW class superconducting generator.

키워드

참고문헌

  1. H. M. Jang, I. Muta, T. Hoshino, T. Nakamura, S. W. Kim, M. H. Sohn, Y. K. Kwon, and K. S. Ryu, "Design and electrical characteristics analysis of 100 HP HTS synchronous motor in 21st century frontier project," IEEE Trans. Appl. Supercond., vol. 12, no. 2, pp. 2197-2200, 2003.
  2. S. K. Baik, M. H. Sohn, S. W. Kim, E. Y. Lee, and Y. K. Kwon, "A 100 HP HTS motor design and the performance analysis," Journal of the Korea Institute of Applied Superconductivity and Cryogenics, vol. 4, no. 2, pp. 31-37, 2002.
  3. S.B. Kim, T. kadota, J.H. Joo, H. Sano, S. Murase, S.H. Lee, J.P. Hong, H.M. Kim, Y.K. Kwon, Y.S. Jo, "A study on electromagnetic and mechanical characteristics of the field coil in HTS motor," Physica C , vol. 470, pp. 1756-1762, 2010. https://doi.org/10.1016/j.physc.2010.05.201
  4. Drew W. Hazelton, "Applications using Superpower 2G HTS conductor," 2011 CEC/ICMC, Spokane, WA, Jun., 2011.
  5. Xibo Yuan, Yongdong Li, Jianyun Chai, "A transformerless modular permanent magnet wind generator system with minimum generator coils," Applied Power Electronics Conference and Exposition (APEC), 2010 Twenty-Fifth Annual IEEE, pp. 2104-2110, 2010.
  6. H. Ohsaki, Y. Terao, R.M. Quddes, M. Sekino, "Electromagnetic Characteristics of 10 MW Class Superconducting Wind Turbine Generators," International Conference on Electrical Machines and Systems , pp. 1303-1306, Incheon, 2010.
  7. J.H. Kim, C.-K. Jwa, Y.S. Jo, S.K. Baik, Y.K. Kwon, H.M. Kim, "Conceptual Design of a Field Coil for 5 MW HTS Synchronous Machine," Journal of Superconductivity and Novel Magnetism, vol. 26, no. 4, pp. 1247-1251, 2013. https://doi.org/10.1007/s10948-012-2040-0

피인용 문헌

  1. Characteristic Analysis of Various Structural Shapes of Superconducting Field Coils vol.25, pp.3, 2015, https://doi.org/10.1109/TASC.2014.2367040
  2. Thermal Design of a Cryogenics Cooling System for a 10 MW-Class High-Temperature Superconducting Rotating Machine vol.25, pp.3, 2015, https://doi.org/10.1109/TASC.2015.2395721
  3. Characteristics of Rotating Armature Type High Temperature Superconducting Generators With Dual Field Windings for the Wind Turbine vol.25, pp.3, 2015, https://doi.org/10.1109/TASC.2014.2369472
  4. Novel model of stator design to reduce the mass of superconducting generators vol.31, pp.5, 2018, https://doi.org/10.1088/1361-6668/aab585
  5. Conceptual design of current lead for large scale high temperature superconducting rotating machine vol.16, pp.2, 2013, https://doi.org/10.9714/psac.2014.16.2.054