Tunnel and Underground Space (터널과지하공간)

Korean Society for Rock Mechanics and Rock Engineering (한국암반공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of the Effect of Asperity Change on the Shear Strength of Joint Plane

절리면의 거칠기 변화가 전단강도에 미치는 영향

  • 조태진 (부경대학교 에너지자원공학과) ;
  • 석재욱 (한국시설안전공단 시설안전연구소) ;
  • 이종건 (한국시설안전공단 시설안전연구소)
  • Received : 2013.10.08
  • Accepted : 2013.10.28
  • Published : 2013.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Multi-stage shear test has been performed using joint specimens of gneiss, granite and shale to investigate the influence of micro-scale asperity change on the shear strength of joint plane. For each shear test asperity degradation characteristics of joint specimens of different joint surface strength have been analyzed by utilizing the optimum asperity parameter which can reflect the sequential asperity degradation. Elevation of joint surface profile has been measured and both the changes of asperity parameters and micro-scale asperity distribution have been investigated. Two distinctive variation modes of cohesion and friction angle have been delineated and major cause of shear strength parameter change has been analyzed by considering the micro-scale asperity angle change resulting from the abrasion, fracturing and regeneration of micro-scale asperities. Effects of micro-scale asperity variation on the joint shear strength have been also investigated.

전단거동에 의한 절리면의 거칠기 변화가 전단강도에 미치는 영향을 조사하기 위하여 절리면 강도가 상이한 편마암, 화강암 및 셰일 시료를 이용하여 순차적 다단계 전단시험을 수행하였다. 시험단계별로 절리면 프로파일의 고도를 측정하여 거칠기 계수를 산정하고 미세 거칠기 빈도 변화를 조사하였다. 거칠기 감쇠에 대한 최적의 거칠기 계수를 산정하여 반복된 전단거동에 의한 순차적 거칠기 감쇠특성을 고찰하였다. 전단강도식을 산정하여 점착력과 마찰각의 차별적 변화양상을 도출하였으며, 표면 거칠기의 마모, 파쇄 및 재형성에 의한 미세 거칠기 빈도변화를 조사하여 강도계수 변화의 원인적 요인을 분석하였다. 또한, 미세 거칠기 변화양상이 전단강도에 미치는 영향을 절리면 강도를 고려하여 분석하였다.

Keywords

References

  1. Barton, N. R, and Choubey, V., 1977, The shear strength of rock joints in theory and practice, Rock Mechanics, Vol. 10, pp. 1-54. https://doi.org/10.1007/BF01261801
  2. Cho, T. C., and Suk, J. W., 2013, A study on the effect of normal stress on the joint shear behavior, Journal of Korean society for Rock Mechanics, Vol. 23, No. 3, pp. 203-211. https://doi.org/10.7474/TUS.2013.23.3.203
  3. Deere, D. U., Hendron, A. J. Patton, F. D. and Cording, E. J., 1966, Design of surface and near-surface construction in rock, Proc. 8th U.S. Rock Mech. Symp., pp. 233-243.
  4. Grasselli, G. and Egger, P., 2003, Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters, Int. J. Rock Mech. Min. Sci., Vol. 40, No. 1, pp.25-40. https://doi.org/10.1016/S1365-1609(02)00101-6
  5. Haberfield, C. M. and Johnston I. W., 1994, A mechanistically-based model for rough rock joints, Int. J. Rock Mech. Min. Sci & Geomech., Vol31, No.4, pp. 279-292 https://doi.org/10.1016/0148-9062(94)90898-2
  6. Hong. E. S., 2005, Characterization of Rock Joint Roughness Based on Roughness Mobilization Characteristics, A doctoral dissertation, Korea univ.
  7. Huang, T. H., and Doong, Y. S., 1990, Anisotropic shear strength of rock joints, Proc. the Int. Symp. on Rock Joints, Leon, Norway, pp.211-218.
  8. Kim, D. Y., 2001, Roughness effects on the shear behavior of rock joints, A doctoral dissertation, HanYang Univ.
  9. Kulatilake, P., Shou, G., Huang, T. and Morgan, R., 1995, New peak shear strength criteria for anisotripic rock joints. Int. J. Rock Mech. Min. Sci & Geomech., Vol. 33, pp. 673-697.
  10. Lee, M. H., Kim, J. W. and Chang, K. T., 2007, The influence of rock joint roughness and normal stress on shear behavior, Journal of Korean Society for Rock Mechanics, Vol. 17, No.3, pp. 186-196.
  11. Maerz N. H., Franklin J. A. and Bennett C. P., 1990, Joint roughness measurement using shadow profilometry, Int. J. Rock. Mech. Min. Sci. & Geomech. Abstr. Vol. 27, No. 5, pp.329-343.
  12. Park, J. W., Lee, Y. K., Song, J. J. and Choi, B. H., 2012, A New Coefficient for Three Dimensional Quantification of Rock Joint Roughness, Journal of Korean Society for Rock Mechanics, Vol. 22, No.2, pp. 106-119. https://doi.org/10.7474/TUS.2012.22.2.106
  13. Patton F. D., 1966, Multiple modes of shear failure in rock. Proc. 1st Congr. ISRM, Lisbon, Vol. 1, pp.509-513.
  14. Plesha, M, E., 1987, Rock joint: Theory, constitutive equations, Mech. of Geomaterial Interfaces, Selvadurai $ Boulon(ed.), pp. 375-393.
  15. Tse, R. and Cruden, D. M., 1979, Estimating joint roughness coefficient. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 16, pp. 303-307. https://doi.org/10.1016/0148-9062(79)90241-9
  16. Yang, Z. Y., and Chiang, D. Y., 2000, An experimental study on the progressive shear behaviour of rock joints with tooth-shaped asperities, Int. J. Rock Mech. Min. Sci., Vol. 37, pp. 1247-1259. https://doi.org/10.1016/S1365-1609(00)00055-1
  17. Yu, X. and Vayssade, B., 1991, Joint profiles and their roughness coefficeint, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 28, No. 4, pp. 333-336. https://doi.org/10.1016/0148-9062(91)90598-G

Cited by

  1. Shear Behavior Characteristics of Rock Joints Considering Roughness Parameters vol.26, pp.5, 2016, https://doi.org/10.7474/TUS.2016.26.5.384