References
- Oksman, K., "Mechanical Properties of Natural Fiber Mat Reinforced Thermoplastic," Applied Composite Materials Vol. 7, 2000, pp. 403-414. https://doi.org/10.1023/A:1026546426764
- Vink, E.T.H., Rábago, K.R., Glassner, D.A., and Gruber, P. R., "Applications of Life Cycle Assessment to Nature-Works. Polylactide (PLA) Production," Polymer Degradation and Stability, Vol. 80, 2003, pp. 403-419. https://doi.org/10.1016/S0141-3910(02)00372-5
- Kakiage, M., Ichikawa, T., Yamanobe, T., Uehara, H., and Sawai, D., "Structure and Property Gradation from Surface to Bulk of Poly(L-lactic acid)/poly(D-lactic acid) Blended Films as Estimated from Nanoscratch Tests Using Scanning Probe Microscopy," ACS Applied Materials and Interfaces, Vol. 2, 2010, pp. 633-638. https://doi.org/10.1021/am900896q
- Gajria, A.M., Davé, V., Gross, R.A., and McCarthy, S.P., "Miscibility and Biodegradability of Blends of Poly(lactic acid) and Poly(vinyl acetate)," Polymer, Vol. 37, 1996, pp. 437-7444. https://doi.org/10.1016/0032-3861(96)82913-2
- Anderson, K.S., and Hillmyer, M.A., "The Influence of Block Copolymer Microstructure on the Toughness of Compatibilized Polylactide/polyethylene Blends", Polymer, Vol. 45, 2004, pp. 8809-8823. https://doi.org/10.1016/j.polymer.2004.10.047
- Girija, B.G., Sailaja, R.R.N., and Madras, G., "A Comparison of the Structure, Thermal Properties, and Biodegradability of Polycaprolactone/chitosan and Acrylic Acid Grafted Polycaprolactone/ chitosan," Polymer, Vol. 46, 2005, pp. 147-155. https://doi.org/10.1016/j.polymer.2004.11.013
- Ton That, M.T., Perrin Sarazin, F., Cole, K.C., Bureau, M.N., and Denault, J., "Polyolefin Nanocomposites: Formulation and Development," Polymer Engineering and Science, Vol. 44, 2004, pp. 1212-1219. https://doi.org/10.1002/pen.20116
- Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., and Chung, T.C., "Polypropylene/Montmorillonite Nanocomposites. Review of the Synthetic Routes and Materials Properties," Chemistry of Materials, Vol. 46, 2001, pp. 3516-3523.
- Zhai, H., Xu, W., Guo, H., Zhou, Z., Shen, S., and Song, Q., Eur "Preparation and Characterization of PE and PE-g-MAH/ Montmorillonite Nanocomposites," European Polymer Journal, Vol. 40, 2004, pp. 2539-2545. https://doi.org/10.1016/j.eurpolymj.2004.07.009
- Ho, C.H., Wang, C.H., Lin, C.I., and Lee, Y.D., "Synthesis and Characterization of TPO-PLA Copolymer and Its behavior as Compatibilizer for PLA/TPO Blends", Polymer Vol. 49, 2008, pp. 3902-3910. https://doi.org/10.1016/j.polymer.2008.06.054
- Wojciechowska, E., Fabia, J., and Slusarczyk, C., "Manufacturing and Mechanical Properties of Sisal Fiber Reinforced Hybrid Composites," Fibres & Textiles in Eastern Europe, Vol. 5(53), 2005, pp. 126-128.
- Folkes, M.J., and Belvis, M., (Ed.), "Short Fiber Reinforced Thermoplastics," Wiley, Herts, 1985, pp. 151-153.
Cited by
- Mechanical Properties of Injection Molded Poly(lactic) Acid—<i>Luffa</i> Fiber Composites vol.05, pp.04, 2015, https://doi.org/10.4236/snl.2015.54008
- Valorization of waste jute fibers in developing low-density polyethylene /poly lactic acid bio-based composites vol.34, pp.8, 2015, https://doi.org/10.1177/0731684415576354
- Poly(1-butene) as a modifier of polylactide properties vol.57, pp.6, 2015, https://doi.org/10.1134/S0965545X15070081