DOI QR코드

DOI QR Code

TiC-Mo 공정복합재료의 고온 변형특성

Deformation Properties of TiC-Mo Eutectic Composite at High Temperature

  • 신순기 (강원대학교 신소재공학과)
  • Shin, Soon-Gi (Department of Advanced Materials Engineering, College of Samcheok, Kangwon National University)
  • 투고 : 2013.08.18
  • 심사 : 2013.09.17
  • 발행 : 2013.10.27

초록

The deformation properties of a TiC-Mo eutectic composite were investigated in a compression test at temperatures ranging from room temperature to 2053 K and at strain rates ranging from $3.9{\times}10^{-5}s^{-1}$ to $4.9{\times}10^{-3}s^{-1}$. It was found that this material shows excellent high-temperature strength as well as appreciable room-temperature toughness, suggesting that the material is a good candidate for high-temperature application as a structure material. At a low-temperature, high strength is observed. The deformation behavior is different among the three temperature ranges tested here, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurs, and from the beginning the work hardening level is high. At a high temperature, a yield drop occurs again, after which deformation proceeds with nearly constant stress. The temperature- and yield-stress-dependence of the strain is the strongest in this case among the three temperature ranges. The observed high-temperature deformation behavior suggests that the excellent high-temperature strength is due to the constraining of the deformation in the Mo phase by the thin TiC components, which is considerably stronger than bulk TiC. It is also concluded that the appreciable room-temperature toughness is ascribed to the frequent branching of crack paths as well as to the plastic deformation of the Mo phase.

키워드

참고문헌

  1. I. Miyake and T. Tanase, Cemented Carbide and Sintered Hard Materials (Basic and Application)(ed. H. Suzuki), pp.347-369, Maruzen, Tokyo (1986).
  2. S. G. Shin, Kor. J. Met. Mater., 48(9), 825 (2010).
  3. S. G. Shin, Kor. J. Met. Mater., 51(7), 515 (2013). https://doi.org/10.3365/KJMM.2013.51.7.515
  4. V. N. Eremenko and T. Ya Velikanova, Porosh Kovaya Metallurgiya, 5, 3 (1963).
  5. O. I. Bankovskii, O. M. Barabash, A. D. Vasilev, V. F. Moiseer, E. P. Pechkovskii and V. I. Trefilov, Soviet Powder Metallurgy and Metal Ceramics, 16, 361 (1977). https://doi.org/10.1007/BF00791087
  6. H. G. Cho, Metallic Materials Engineering Dictionary, p.879, Jimmunsa, Seoul (1997).
  7. H. Kurisita, H. Yoshinaga, F. Takao and S. Goto, J. Jpn. Inst. Met., 44(4), 395 (1980). https://doi.org/10.2320/jinstmet1952.44.4_395
  8. S. G. Shin, Kor. J. Met. Mater., to be published.
  9. J. Yamazaki, Dictionary of Composite Materials (in Japanese)(ed. Y. Miyairi), p.428-443, Asakurasyoden, Tokyo (1991).
  10. R. H. Hannink and M. J. Murray, J. Mater. Sci., 9, 223 (1974). https://doi.org/10.1007/BF00550945
  11. R. Farraro and R. B. Mclellan, Met. Trans., 8A, 1563 (1977).
  12. G. E. Dieter, Mechanical Metallurgy, 3rd ed., p. 473- 498, McGraw-Hill, Maryland (1986).
  13. H. Yoshinaga and H. Kurishita, Transition Metal Carbides and Their Composition, in Creep behavior of Crystalline Solids (ed. B. Wilshire and R. W. Evans), p.311, Pineridge Press, Swansea U. K. (1983).
  14. G. Langford, Met. Trans., 8A, 861 (1977).
  15. B. Cantor and G. A. Chadwick, J. Mater. Sci., 10, 578 (1975). https://doi.org/10.1007/BF00566564
  16. M. J. Marcinkowski and H. A. Lipsitt, Acta Met., 10, 95 (1962). https://doi.org/10.1016/0001-6160(62)90055-X
  17. F. B. Fickering, Iron & Steel, 38, 110 (1965).
  18. J. K. Lim, G. Yang and Y. E. Ihm, Kor. J. Mater. Res., 23(5), 293 (2013). https://doi.org/10.3740/MRSK.2013.23.5.293
  19. H. G. Seo, Y. D. Kim, M. J. Suk and S. T. Oh, Kor. J. Mater. Res., 23(6), 339 (2013). https://doi.org/10.3740/MRSK.2013.23.6.339
  20. G. T. Joo and B. Kang, Kor. J. Mater. Res., 22(12), 293 (2012).

피인용 문헌

  1. Deformation Property of TiC-Mo Solid Solution Single Crystal at High Temperature by Compression Test vol.24, pp.11, 2014, https://doi.org/10.3740/MRSK.2014.24.11.625