참고문헌
- Allread, W.G., Marras, W.S. and Parnianpour, M., Trunk kinematics of one-handed lifting, and the effects of asymmetry and load weight, Ergonomics, 39(2), 322-334, 1996. https://doi.org/10.1080/00140139608964462
- Bertec Force Plate 4060A, Bertec Corporation, 6171 Huntley Road, Suite 3, Columbus, Ohio, U.S.A.
- De Looze, M.P., Toussaint, H.M., Van Dieen, J.H. and Kemper, H.C.G., Joint moments and muscle activity in the lower extremeties and lower back in lifting and lowering tasks, Journal of Biomechanics, 26(9), 1067-1076, 1993. https://doi.org/10.1016/S0021-9290(05)80006-5
- Davis, K.G., Marras, W.S. and Waters, T.R., Evaluation of spinal loading during lowering and lifting, Clinical Biomechanics, 13(3), 141-152, 1998. https://doi.org/10.1016/S0268-0033(97)00037-5
- Drury, C.G., Law, C. and Pawenski, C.S., A survey of industrial box handling, Human Factors, 24, 553-565, 1982. https://doi.org/10.1177/001872088202400505
- Fischer, B.O., Analysis of Spinal Stresses During Lifting, unpublished M.S. Thesis, University of Michigan, Ann Arbor, Michigan, 1967.
- Gagnon, D. and Gagnon, M., The influence of dynamic factors on triaxial net muscular moments at the L5/S1 joint during asymmetric lifting and lowering, Journal of Biomechanics, 25, 891-901, 1992. https://doi.org/10.1016/0021-9290(92)90229-T
- Gagnon, M. and Smyth, G., Muscular mechanical energy expenditure as a process for detecting potential risks in manual material handling, Journal of Biomechanics, 24, 191-203, 1991. https://doi.org/10.1016/0021-9290(91)90177-O
- Gall, B. and Parkhouse, W., Changes in physical capacity as a function of age in heavy manual work, Ergonomics, 47(6), 671-687, 2004. https://doi.org/10.1080/00140130410001658691
- Garg, A., Physiological response to one-handed in the horizontal plane by female workers, American Industrial Hygiene Association Journal, 44, 190-200, 1983. https://doi.org/10.1080/15298668391404626
- Garg, A. and Saxena, U., Maximum frequency acceptable to female workers for one-handed lifts in the horizontal plane, Ergonomics, 25(9), 839-853, 1982. https://doi.org/10.1080/00140138208925040
- Kim, H.K., Comparison of Lifting and Lowering Activity based on Biomechanical, Physiological, Psychophysical Criteria, Journal of the Ergonomics Society of Korea, 29(1), 145-153, 2010. https://doi.org/10.5143/JESK.2010.29.1.145
- Kim, H.K., Comparison of Compressive Forces on Low Back(L5/S1) for One-hand Lifting and Two-hands Lifting Activity, Journal of the Ergonomics Society of Korea, 30(5), 597-603, 2011. https://doi.org/10.5143/JESK.2011.30.5.597
- Laboratory Information Management System, LIMS Version 1.24, AMT System, Columbus, Ohio, U.S.A.
- Marras, W.S., Davis, S.W., Miller, R.J. and Mirka, G.A., Apparatus for monitoring the motion components of the spine, U.S. Patent Offices, Serial No. 09/336,896, 1990.
- Marras, W.S., Fathallah, F.A., Miller, R.J., Davis, S.W. and Mirka, G.A., Accuracy of a three-dimensional lumbar motion monitor for recording dynamic trunk motion characteristics, International Journal of Industrial Ergonomics, 9, 75-87, 1992. https://doi.org/10.1016/0169-8141(92)90078-E
- Marras and Davis, Spine loading during asymmetric lifting using one versus two hands, Ergonomics, 41(6), 817-834, 1998. https://doi.org/10.1080/001401398186667
- Marras, W.S. and Mirka, G.A., Trunk strength during asymmetric trunk motion, Human Factors, 31, 667-677, 1989. https://doi.org/10.1177/001872088903100603
- McGil, S.M., Searching for the safe biomechanical envelope for maintaining healthy tissue, Pre-ISSLS Workshop, The Contribution of Biomechanics to the Prevention and Treatment of Low Back Pain, University of Vermont, June 25, 1996.
- Mirka, G.A., and Marras, W.S., A stochastic model of trunk muscle contraction during trunk bending, Spine, 18, 1396-1409, 1993. https://doi.org/10.1097/00007632-199318110-00003
- Mital, A. and Ilango, M., Subjective estimates of one-handed carrying tasks, Applied Ergonomics, 14, 265-269, 1983. https://doi.org/10.1016/0003-6870(83)90004-2
- Mital, A. and Kumar, S., Human muscle strength definitions, measurement, and usage: Part I - Guidelines for the practitioner, International Journal of Industrial Ergonomics, 22, 101-121, 1998a. https://doi.org/10.1016/S0169-8141(97)00070-X
- Mital, A. and Kumar, S., Human muscle strength definitions, measurement, and usage: Part II - The scientific basis (knowledge base) for the guide, International Journal of Industrial Ergonomics, 22, 123-144, 1998b. https://doi.org/10.1016/S0169-8141(97)00071-1
- Mo, Seung-Min, Kwag, Jongseon, Jung, Myung-Chul, Literature Review on One-Handed Manual Material Handling, Journal of the Ergonomics Society of Korea, 29(5), 819-829, 2010. https://doi.org/10.5143/JESK.2010.29.5.819
- NI-DAQ-DA2821, National Instruments Corporation, 11500N Mopac Expwy, Austin, Texas, U.S.A.
- NIOSH(National Institute for Occupational Safety and Health), Work Practices Guide for Manual Lifting, Department of Health and Human Services Publication No. 81-122, 1981.
- Reid, J.G. and Costigan, P.A., Trunk muscle balance and muscular force, Spine, 12, 783-786, 1987. https://doi.org/10.1097/00007632-198710000-00013
- Troup, J.D.G., Leskinen, T.P.J., Stalhammar, H.R. and Kuorinka, I.A.A., A Comparison of Intraabdominal Pressure Increases, Hip Torque, and Lumbar Vertebral Compression in different Lifting Technique, Human Factors, 4, 1983.
- Waters, T.R., Putz-Anderson, V., Garg, A. and Fine, L.J., Revised NIOSH equation for the design and evaluation of manual lifting tasks, Ergonomics, 36(7), 749-776, 1993. https://doi.org/10.1080/00140139308967940