DOI QR코드

DOI QR Code

Undrained strength-deformation characteristics of Bangkok Clay under general stress condition

  • Yimsiri, Siam (Department of Civil Engineering, Faculty of Engineering, Burapha University) ;
  • Ratananikom, Wanwarang (Department of Civil Engineering, Faculty of Engineering, Burapha University) ;
  • Fukuda, Fumihiko (Faculty of Engineering, Hokkaido University) ;
  • Likitlersuang, Suched (Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University)
  • 투고 : 2012.01.16
  • 심사 : 2013.05.16
  • 발행 : 2013.10.25

초록

This paper presents an experimental study on the influence of principal stress direction and magnitude of intermediate principal stress on the undrained stress-strain-strength behaviors of Bangkok Clay. The results of torsional shear hollow cylinder and advanced triaxial tests with various principal stress directions and magnitudes of intermediate principal stress on undisturbed Bangkok Clay specimens are presented. The analysis of testing results include: (i) stress-strain and pore pressure behaviors, (ii) stiffness characteristics, and (iii) strength characteristics. The results assert clear evidences of anisotropic characteristics of Bangkok Clay at pre-failure and failure conditions. The magnitude of intermediate principal stress for plane-strain condition is also investigated. Both failure surface and plastic potential in deviatoric plane of Bangkok Clay are demonstrated to be isotropic and of circular shape which implies an associated flow rule. It is also observed that the shape of failure surface in deviatoric plane changes its size, while retaining its circular shape, with the change in direction of major principal stress. Concerning the behavior of Bangkok Clay found from this study, the discussions on the effects of employed constitutive modeling approach on the resulting numerical analysis are made.

키워드

참고문헌

  1. Atkinson, J.H. (1975), "Anisotropic elastic deformations in laboratory tests on undisturbed London Clay", Geotech., 25(2), 357-374. https://doi.org/10.1680/geot.1975.25.2.357
  2. Callisto, L. and Calabresi, G. (1998), "Mechanical behavior of a natural soft clay", Geotech., 48(4), 495-513. https://doi.org/10.1680/geot.1998.48.4.495
  3. Callisto, L. and Rampello, S. (2002), "Shear strength and small-strain stiffness of a natural clay under general stress conditions", Geotech., 52(8), 547-560. https://doi.org/10.1680/geot.2002.52.8.547
  4. Cuccovillo, T. and Coop, M.P. (1997), "The measurement of local axial strains in triaxial test using LVDTs", Geotech., 47(1), 167-171. https://doi.org/10.1680/geot.1997.47.1.167
  5. Fukuda, F., Mitachi, T. and Shibuya, S. (1997), "Induced anisotropy appeared in the deformation and strength of remolded clay", Soil. Found., 37(4), 139-148. https://doi.org/10.3208/sandf.37.4_139
  6. Gasparre, A., Nishimura, S., Minh, N.A., Coop, M.R. and Jardine, R.J. (2007), "The stiffness of natural London Clay", Geotech., 57(1), 33-47. https://doi.org/10.1680/geot.2007.57.1.33
  7. Gramatikopoulou, A., Zdravkovic, L. and Potts, D.M. (2007), "The effect of the yield and plastic potential deviatoric surfaces on the failure height of an embankment", Geotech., 57(10), 795-806. https://doi.org/10.1680/geot.2007.57.10.795
  8. Hight, D.W., Gens, A. and Symes, M.J. (1983), "The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils", Geotech., 33(4), 355-383. https://doi.org/10.1680/geot.1983.33.4.355
  9. Hird, C.C. and Yung, P.C.Y. (1989), "The Use of Proximity Transducers for Local Strain Measurements in Triaxial Tests", Geotech. Test. J. ASTM, 12(4), 292-296. https://doi.org/10.1520/GTJ10987J
  10. Kirkgard, M.M. and Lade, P.V. (1991), "Anisotropy of Normally Consolidated San Francisco Bay Mud", Geotech. Test. J. ASTM, 14(3), 231-246. https://doi.org/10.1520/GTJ10568J
  11. Kirkgard, M.M. and Lade, P.V. (1993), "Anisotropic three-dimensional behavior of a normally consolidated clay", Can. Geotech. J., 30(5), 848-858. https://doi.org/10.1139/t93-075
  12. Kumruzzaman, Md. and Yin, J.H. (2010), "Influence of principal stress direction and intermediate principal stress on the stress-strain-strength behaviour of completely decomposed granite", Can. Geotech. J., 47(2), 164-179. https://doi.org/10.1139/T09-079
  13. Kurukulasuriya, L.C., Oda, M. and Kazama, H. (1999), "Anisotropy of undrained shear strength of an over-consolidated soil by triaxial and plane strain tests", Soil. Found., 39(1), 21-29.
  14. Kuwano, J. and Bhattarai, B.N. (1989), "Deformation characteristics of Bangkok Clay under three dimensional stress conditions", Geotech. Eng. SEAGS, 20(2), 111-137.
  15. Lings, M.L. (2001), "Drained and undrained anisotropic elastic stiffness parameters", Geotech., 51(6), 555-565. https://doi.org/10.1680/geot.2001.51.6.555
  16. Nishimura, S., Minh, N.A. and Jardine, R.J. (2007), "Shear strength anisotropy of natural London Clay", Geotech., 57(1), 49-62. https://doi.org/10.1680/geot.2007.57.1.49
  17. Phien-Wej, N., Giao, P.H. and Nutalaya, P. (2006), "Land subsidence in Bangkok, Thailand", Eng. Geol., 82(4), 187-201. https://doi.org/10.1016/j.enggeo.2005.10.004
  18. Potts, D.M. and Zdravkovic, L. (1999), Finite Element Analysis in Geotechnical Engineering: Theory, Thomas Telford.
  19. Prashant, A. and Penumadu, S. (2004), "Effect of intermediate principal stress on overconsolidated kaolin clay", J. Geotech. Geoenviron. Eng. ASCE, 130(3), 284-292. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:3(284)
  20. Prashant, A. and Penumadu, D. (2005), "A laboratory study of normally consolidated kaolin clay", Can. Geotech. J., 42(1), 27-37. https://doi.org/10.1139/t04-076
  21. Prashant, A. and Penumadu, S. (2007), "Effect of microfabric on mechanical behavior of kaolin clay using cubical true triaxial testing", J. Geotech. Geoenviron. Eng. ASCE, 133(4), 433-444. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:4(433)
  22. Prust, R.E., Davies, J. and Hu, S. (2005), "Pressuremeter Investigation for Mass Rapid Transit in Bangkok, Thailand", Transportation Research Record: J. Transport. Res. Board, No. 1928, 207-217.
  23. Ratananikom, W., Likitlersuang, S. and Yimsiri, S. (2013), "An investigation of anisotropic elastic parameters of Bangkok Clay from vertical and horizontal cut specimens", Geomech. Geoeng.: Int., 8(1), 15-27. https://doi.org/10.1080/17486025.2012.726746
  24. Sayao, A. and Vaid, Y.P. (1991), "A critical assessment of stress nonuniformities in hollow cylinder test specimens", Soil. Found., 31(1), 60-72.
  25. Seah, T.H. and Lai, K.C. (2003), "Strength and deformation behavior of Soft Bangkok Clay", Geotech. Test. J. ASTM, 26(4), 421-431.
  26. Shibuya, S., Tamrakar, S.B. and Theramast, N. (2001), "Geotechnical site characterization on engineering properties of Bangkok Clay", Geotech. Eng. SEAGS, 32(3), 139-151.
  27. Wijewickreme, D. and Vaid, Y.P. (1991), "Stress non-uniformities in hollow cylinder torsional specimens", Geotech. Test. J. ASTM, 14(4), 349-362. https://doi.org/10.1520/GTJ10203J
  28. Yimsiri, S. and Soga, K. (2011), "Cross-anisotropic elastic parameters of two natural stiff clays", Geotech., 61(9), 809-814. https://doi.org/10.1680/geot.9.P.072
  29. Yimsiri, S., Ratananikom, W. and Likitlersuang, S. (2009), "Investigation of some anisotropic character- istics of Bangkok Clay", The 17th International Conference on Soil Mechanics and Geotechnical Engineering, 17ICSMGE, Alexandria, Egypt, 1068-1071.
  30. Zdravkovic, L. and Jardine, R.J. (1997), "Some anisotropic stiffness characteristics of a silt under general stress conditions", Geotech., 47(3), 407-437. https://doi.org/10.1680/geot.1997.47.3.407
  31. Zdravkovic, L. and Jardine, R.J. (2000), "Undrained anisotropy of Ko-consolidated silt", Can. Geotech. J., 37(1), 178-200. https://doi.org/10.1139/t99-094
  32. Zdravkovic, L. and Jardine, R.J. (2001), "The effect on anisotropy of rotating the principal stress axes during consolidation", Geotech., 51(1), 69-83. https://doi.org/10.1680/geot.2001.51.1.69

피인용 문헌

  1. Long-term response of flexible pipe in sand trench due to consolidation of native clay vol.61, pp.4, 2021, https://doi.org/10.1016/j.sandf.2021.05.003
  2. Use of Microbially Induced Calcite Precipitation for Soil Improvement in Compacted Clays vol.7, pp.4, 2013, https://doi.org/10.1007/s40891-021-00327-1
  3. Improving mechanical properties and shrinkage cracking characteristics of soft clay in deep soil mixing vol.316, pp.None, 2022, https://doi.org/10.1016/j.conbuildmat.2021.125858