References
- N. Saravanan and G. Nagarajan, "Performance and Emission Studies on Port Injection of Hydrogen with Varied Flow Rates with Diesel as an Ignition Source," Applied Energy, Vol.87, No.7, pp.2218-2229, 2010. https://doi.org/10.1016/j.apenergy.2010.01.014
- D. J. Brodrecht and J. J. Rusek, "Aluminum-hydrogen Peroxide Fuel-cell Studies," Applied Energy, Vol.74, Issues 1-2, pp.113-124, 2003. https://doi.org/10.1016/S0306-2619(02)00137-X
- S. Sukuraman and S. C. Kong, "Numerical Study on Mixture Formation Characteristics in a Direct-injection Hydrogen Engine," International Journal of Hydrogen Energy, Vol.35, Issue 15, pp.7991-8007, 2010. https://doi.org/10.1016/j.ijhydene.2010.05.090
- J. M. Modak, "Haber Process for Ammonia Synthesis," Resonance, Vol.7, pp.69-77, 2002.
- D. Richards and R. W. Henderson, "OTEC Produced Ammonia - An Alternative Fuel," 8th Ocean Energy Conference, pp.665-673, 1981.
- M. Appl, Ammonia - Principles and Industrial Practice, Wiley-VCH, Germany, 1999.
- R. G. Grimes, "Energy Depot Fuel Production and Utilization," SAE 650051, 1965.
- E. Kroch, "Ammonia - A Fuel for Motor Buses," Journal of the Institute of Petroleum, Vol.31, pp.213-223, 1945.
- E. S. Starkman, H. K. Newhall, R. Sutton, T. Maguire and L. Farbar, "Ammonia as a Spark Ignition Engine Fuel: Theory and Application," SAE 660155, 1966.
- S. M. Grannell, D. N. Assanis, S. V. Bohac and D. E. Gillespie, "The Fuel Mix Limits and Efficiency of a Stoichiometric, Ammonia, and Gasoline Dual Fueled Spark Ignition Engine," ASME Journal of Engineering for Gas Turbines and Power, Vol.130, No.4, pp.1-8, 2008.
- J. T. Gray, E. Dimitroff, N. T. Meckel and R. D. Quillian, "Ammonia Fuel - Engine Compatibility and Combustion," SAE 660156, 1966.
- T. J. Pearsall and C. G. Garabedian, "Combustion of Anhydrous Ammonia in Diesel Engines," SAE 670947, 1967.
- K. Bro and P. S. Pederson, "An Experimental Investigation of Methanol, Ethanol, Methane and Ammonia in a D.I. Diesel Engine with Pilot Injection," SAE 770794, 1977.
- Iowa Energy Center, http://www.energy.iastate.edu/Renewable/ammonia/index.htm, 2012.
- A. J. Reiter and S. C. Kong, "Demonstration of Compression-ignition Engine Combustion Using Ammonia in Reducing Greenhouse Gas Emissions," Energy & Fuels, Vol.22, pp.2963-2971, 2008. https://doi.org/10.1021/ef800140f
- K. H. Ryu, G. Zacharakis-Jutz and S.-C. Kong, "Effect of Fuel Compositions on Diesel Engine Performance Using Ammonia-DME Mixtures," SAE 2013-01-1133, 2013.
- R. Liu, D. S. K. Ting and M. D. Checkel, "Ammonia as a Fuel for SI Engine," SAE 2003-01-3095, 2003.
- J. R. Bartels, A Feasibility Study of Implementing an Ammonia Economy, M. S. Thesis, Iowa State University, Ames, Iowa, 2008.
- J. Jang, Y. Woo, Y. Lee and J. Kim, "The Examination on Corrosiveness of Vehicle Fuel System by Ammonia," KSAE Annual Conference Proceedings, pp.669-673, 2012.
- Y.-D. Kim, S.-J. Jeong and W.-S. Kim, "Effect of Water on the Kinetics of Nitric Oxides Reduction by Ammonia over V-based Catalyst," Transactions of KSAE, Vol.20, No.6, pp.73-82, 2012. https://doi.org/10.7467/KSAE.2012.20.6.073
- M.-F. Hsieh and J. Wang, "Sliding-mode Observer for Urea-selective Catalytic Reduction (SCR) Mid-catalyst Ammonia Concentration Estimation," Int. J. Automotive Technology, Vol.12, No.3, pp.321-329, 2011. https://doi.org/10.1007/s12239-011-0038-4