DOI QR코드

DOI QR Code

Loading rate effect on superelastic SMA-based seismic response modification devices

  • Zhu, Songye (The Hong Kong Polytechnic University Shenzhen Research Institute) ;
  • Zhang, Yunfeng (Department of Civil and Environmental Engineering, University of Maryland)
  • 투고 : 2012.02.10
  • 심사 : 2013.01.03
  • 발행 : 2013.06.25

초록

The application of shape memory alloys (SMAs) to the seismic response reduction of civil engineering structures has attracted growing interest due to their self-centering feature and excellent fatigue performance. The loading rate dependence of SMAs raises a concern in the seismic analysis of SMA-based devices. However, the implementation of micromechanics-based strain-rate-dependent constitutive models in structural analysis software is rather complicated and computationally demanding. This paper investigates the feasibility of replacing complex rate-dependent models with rate-independent constitutive models for superelastic SMA elements in seismic time-history analysis. Three uniaxial constitutive models for superelastic SMAs, including one rate-dependent thermomechanical model and two rate-independent phenomenological models, are considered in this comparative study. The pros and cons of the three nonlinear constitutive models are also discussed. A parametric study of single-degree-of-freedom systems with different initial periods and strength reduction factors is conducted to examine the effect of the three constitutive models on seismic simulations. Additionally, nonlinear time-history analyses of a three-story prototype steel frame building with special SMA-based damping braces are performed. Two suites of seismic records that correspond to frequent and design basis earthquakes are used as base excitations in the seismic analyses of steel-braced frames. The results of this study show that the rate-independent constitutive models, with their parameters properly tuned to dynamic test data, are able to predict the seismic responses of structures with SMA-based seismic response modification devices.

키워드

참고문헌

  1. Aiken, I.D., Nims, D.K., Whittaker, A.S. and Kelly, J.M. (1993), "Testing of passive energy dissipation systems", Earthq. Spectra, 9(3), 335-370. https://doi.org/10.1193/1.1585720
  2. Andrawes, B. and DesRoches, R. (2005), "Unseating prevention for multiple frame bridges using superelastic devices", Smart Mater. Struct., 14(3), S60-S67. https://doi.org/10.1088/0964-1726/14/3/008
  3. Auricchio, F. and Sacco, E. (1999), "Modelling of the rate-dependent superelastic behavior of Shape-Memory Alloys", ECCM '99, European Conference on Computational Machanics, Munchen, Germany.
  4. Auricchio, F., Fugazza, D. and DesRoches, R. (2006), "Numerical and experimental evaluation of the damping properties of shape-memory alloys", J. Eng. Mater. T., ASME, 128, 312-319. https://doi.org/10.1115/1.2204948
  5. Boyd, J.G. and Lagoudas, D.C. (1998) "A thermodynamic constitutive model for the shape memory materials part I, the monolithic shape memory alloys", Int. J. Plasticity 12(6), 805-842.
  6. Casciati, F., Faravelli, L. and Al Saleh, R. (2009) "An SMA passive device proposed within the highway bridge benchmark", Struct. Control Health Monit., 16(6), 657-667. https://doi.org/10.1002/stc.332
  7. Christopoulos, C., Filiatrault, A., and Folz, B. (2002), "Seismic response of self-centering hysteretic SDOF systems", Earthq. Eng. Struct. D., 31, 1131-1150. https://doi.org/10.1002/eqe.152
  8. Clark, P.W., Aiken, I.D., Kelly, J.M., Higashino, M. and Krumme, R.C. (1995) "Experimental and analytical studies of shape memory alloy dampers for structural control", Int. Smart Struct. Mater. Passive Damping, Proc. SPIE, San Diego, CA.
  9. DesRoches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", ASCE J. Struct. Eng., 130(1), 38-46. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(38)
  10. Dolce, M. and Cardone, D. (2001), "Mechanical behavior of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension." Int. J. Mech. Sci., 43, 2657-2677. https://doi.org/10.1016/S0020-7403(01)00050-9
  11. Dolce, M., Cardone, D. and Marnetto, R. (2000), "Implementation and testing of passive control devices based on shape memory alloys", Earthq. Eng. Struct. D., 29(7), 945-968 https://doi.org/10.1002/1096-9845(200007)29:7<945::AID-EQE958>3.0.CO;2-#
  12. Dolce, M., Cardone, D., Ponzo F.C. and Valente C. (2005), "Shaking table tests on reinforced concrete frames without and with passive control systems", Earthq. Eng. Struct. D., 34(14), 1687-1717. https://doi.org/10.1002/eqe.501
  13. Graesser, E.J., and Cozzarelli, F.A. (1991), "Shape-memory alloys as new materials for aseismic isolation", ASCE J. Eng. Mech., 117(11), 2590-2608. https://doi.org/10.1061/(ASCE)0733-9399(1991)117:11(2590)
  14. Kim, K., Lim, J., Kim, J. and Lim, Y.M. (2008), "Simulation of material failure behavior under different loading rates using molecular dynamics", Struct. Eng. Mech., 30(2), 177-190. https://doi.org/10.12989/sem.2008.30.2.177
  15. Kozar, I. and Ozbolt, J. (2010), "Some aspects of Load-rate sensitivity in visco-elastic microplane material model", Comput. Concrete, Int J., 7(4), 317-329. https://doi.org/10.12989/cac.2010.7.4.317
  16. Liang, C. and Rogers, C.A. (1990), "One-dimensional thermomechanical constitutive relations for shape memory materials", J. Intell. Mater. Syst. Struct., 1(2), 207-234. https://doi.org/10.1177/1045389X9000100205
  17. Liu, J.L., Zhu, S., Xu, Y.L. and Zhang, Y. (2011), "Displacement-based design approach for highway bridges with SMA isolators", Smart Struct. Syst., 8(2), 173-190. https://doi.org/10.12989/sss.2011.8.2.173
  18. Mao, C. and Li, H. (2005), "SMA-based smart damper/displacement transducer", Smart structures and material, sensors and smart structures technologies for civil, mechanical and aerospace Syst., Proceedings of SPIE, Bellingham, WA. 442-452.
  19. McCormick, J., DesRoches, R., Fugazza, D. and Auricchio, F. (2006), "Seismic vibration control using superelastic shape memory alloys", ASME J. Eng. Mater. Tech., 128(3), 294-301. https://doi.org/10.1115/1.2203109
  20. NEHRP (2003), Recommended provisions for seismic regulations for new buildings and other structures. FEMA 450, Federal Emergency Management Agency, Washington, DC.
  21. Ozbulut, O.E., Hurlebaus, S. and DesRoches, R. (2011), "Seismic response control using shape memory alloys, a review", J. Intell. Mater. Sys. Structures, 22(14), 1531-1549. https://doi.org/10.1177/1045389X11411220
  22. Padgett, J. E., DesRoches, R. and Ehlinger, R. (2010), "Experimental response modification of a four-span bridge retrofit with shape memory alloys", Struct. Control Health Monit., 32(3), 165-173.
  23. Prahlad, H. and Chopra, I. (2003), "Development of a strain-rate dependent model for uniaxial loading of SMA wires", J. Intell. Mater. Syst. Struct., 14(7) 429-442.
  24. Prakash, V., Powell, G.H. and Campbell, S. (1993), DRAIN-2DX, Base program and user guide, Report No. CB/SES-93/17, Univ. California, Berkeley, CA.
  25. Seo, C. Y. and Sause, R. (2005), "Ductility demands on self-centering systems under earthquake loading", ACI Struct. J., 102(2), 275-285.
  26. Sommerville, P., et al. (1997), Development of ground motion time histories for Phase 2 of the FEAM/SAC steel project, SAC Background document SAC/BD-91/04, SAC joint venture, Sacramento, California.
  27. Whittaker, A.S., Krumme, R., Sweeney, S.C. and Hayes, J.R. (1995), Structural control of building response using shape-memory alloys. Phase 1. Construction Engineering Research Lab (Army), Champaign, IL.
  28. Wilde, K., Gardoni, P. and Fujino, Y. (2000), "Base isolation system with shape memory alloy device for elevated highway bridges", Eng. Struct., 22(3), 222-229. https://doi.org/10.1016/S0141-0296(98)00097-2
  29. Zhu, S. and Zhang, Y (2006), "A shape memory alloy-based reusable hysteretic damper for seismic hazard mitigation", Smart Mater. Struct., 16(5), 1603-1613.
  30. Zhu, S. and Zhang, Y. (2007a), "Seismic behavior of self-centering braced frame buildings with reusable hysteretic damping brace." Earthq. Eng. Struct. D., 36(10), 1329-1346. https://doi.org/10.1002/eqe.683
  31. Zhu, S. and Zhang, Y. (2007b), "A thermomechanical constitutive model for superelastic SMA wire with Strain-rate dependency", Smart Mater. Struct., 16(5), 1696-1707. https://doi.org/10.1088/0964-1726/16/5/023
  32. Zhu, S. and Zhang, Y. (2008), "Seismic analysis of concentrically braced frame systems with self-centering friction damping braces", J. Struct. Eng., 134(1), 121-131. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(121)
  33. Zhu (2007), Seismic behavior of framed structural systems with self-centering friction damping braces, Ph.D. dissertation, Dept. civil and enviro. eng., Lehigh Univ., Bethlehem, PA, USA.

피인용 문헌

  1. Performance-based seismic design of self-centering steel frames with SMA-based braces vol.130, 2017, https://doi.org/10.1016/j.engstruct.2016.09.051
  2. Feasibility study of utilizing superelastic shape memory alloy plates in steel beam–column connections for improved seismic performance vol.26, pp.4, 2015, https://doi.org/10.1177/1045389X14529032
  3. Local effects induced by dynamic load self-heating in NiTi wires of shape memory alloys 2017, https://doi.org/10.1002/stc.2134
  4. Shake table test and numerical study of self-centering steel frame with SMA braces vol.46, pp.1, 2017, https://doi.org/10.1002/eqe.2777
  5. Effect of hysteretic properties of SMAs on seismic behavior of self-centering concentrically braced frames 2017, https://doi.org/10.1002/stc.2110
  6. Robustness of Performance-Based Plastic Design Method for SMABFs pp.2093-6311, 2018, https://doi.org/10.1007/s13296-018-0165-0
  7. Controlling Residual Drift in BRBFs by Combining SCCBFs in Parallel vol.32, pp.4, 2018, https://doi.org/10.1061/(ASCE)CF.1943-5509.0001191
  8. Temperature effect on seismic performance of CBFs equipped with SMA braces vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.495
  9. Hysteretic Behavior and Ultimate Energy Dissipation Capacity of Large Diameter Bars Made of Shape Memory Alloys under Seismic Loadings vol.9, pp.10, 2013, https://doi.org/10.3390/met9101099
  10. Numerical analysis of hysteretic behavior for RAC structure under earthquake loading vol.18, pp.4, 2019, https://doi.org/10.1080/13467581.2019.1645671
  11. Experimental tests and finite element simulations of a new SMA-steel damper vol.29, pp.3, 2013, https://doi.org/10.1088/1361-665x/ab6abd
  12. Experimental Study of Novel Self-Centering Seismic Base Isolators Incorporating Superelastic Shape Memory Alloys vol.146, pp.7, 2020, https://doi.org/10.1061/(asce)st.1943-541x.0002679