DOI QR코드

DOI QR Code

Experimental and analytical investigation on RC columns with distributed-steel bar

  • Ye, Mao (Guangzhou University - Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University, GuangZhou Higher education Mega Center) ;
  • Pi, Yinpei (Guangzhou University - Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University, GuangZhou Higher education Mega Center) ;
  • Ren, Min (Guangzhou University - Tamkang University Joint Research Center for Engineering Structure Disaster Prevention and Control, Guangzhou University, GuangZhou Higher education Mega Center)
  • 투고 : 2012.04.29
  • 심사 : 2013.08.30
  • 발행 : 2013.09.25

초록

Distributed-Steel Bar Reinforced Concrete (DSBRC) columns, a new and innovative construction technique for composite steel and concrete material which can alleviate the difficulty in the arrangement of the stirrup in the column, were studied experimentally and analytically in this paper. In addition, an ordinary steel Reinforced Concrete (SRC) column was also tested for comparison purpose. The specimens were subjected to quasi-static load reversals to model the earthquake effect. The experimental results including the hysteresis curve, resistance recession, skeleton curves and ductility ratio of columns were obtained, which showed well resistant-seismic behavior for DSBRC column. Meanwhile a numerical three-dimensional nonlinear finite-element (FE) analysis on its mechanical behavior was also carried out. The numerically analyzed results were then compared to the experimental results for validation. The parametric studies and investigation about the effects of several critical factors on the seismic behavior of the DSBRC column were also conducted, which include axial compression ratios, steel ratio, concrete strength and yield strength of steel bar.

키워드

참고문헌

  1. ABAQUS Inc (2004), ABAQUS Theory Manual And User Manuals, Version 6.5, R.I. ABAQUS Inc., Providence, USA
  2. ANSI/AISC 360-05 (2005), Specification for structural steel buildings, American Institute of Steel Construction, Chicago, USA.
  3. Bu, N. (2010), "Construction technology of steel-concrete composite structure in China World Trade Center Tower III project", Construction Technology, 39(10), 89-92. (in Chines)
  4. Chang, X., Wei, Y.Y. and Yun, Y.C. (2012), "Analysis of steel-reinforced concrete-filled steel tubular (SRCFST) columns under cyclic loading", Construction and Building Materials, 28(1), 88-95. https://doi.org/10.1016/j.conbuildmat.2011.08.033
  5. Doran B, Koksa H O, and Turgay T (2009), "Nonlinear finite element modeling of rectangular/square concrete columns confined with FRP", Journal of Materials and Design, 30(8), 3066-3075. https://doi.org/10.1016/j.matdes.2008.12.007
  6. Ehab, E. and Ben, Y. (2006), "Design and behavior of concrete-filled cold formed stainless steel tube columns", Eng Struct, 28(5), 716-28. https://doi.org/10.1016/j.engstruct.2005.09.023
  7. Eurocode 4 (2004), Design of composite steel and concrete structures, part 1.1, general rules and rules for building, British Standards Institution, London, UK.
  8. Han, L.H., Wang, W.D. and Zhao X.L. (2008), "Behavior of steel beam to concrete-filled SHS column frames, Finite element model and verifications", Engineering Structures, 30(6), 1647-1658. https://doi.org/10.1016/j.engstruct.2007.10.018
  9. Hu, H.T., Huang, C.S. and Chen, Z.L. (2005), "Finite element analysis of CFT columns subjected to an axial compressive force and bending moment in combination", Journal of Constructional Steel Research, 61(12), 1692-1712. https://doi.org/10.1016/j.jcsr.2005.05.002
  10. Lee, J. and Fenves, G. L. (1998). "Plastic-damage model for cyclic loading of concrete structures", Journal of Engineering Mechanics, 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  11. Lu, F.W., Li, S.P. and Sun, G.J. (2007), "Nonlinear finite element analysis of square concrete-filled steel tube columns under compressive", Engineering Mechanics, 24(3), 110-114. (in Chines)
  12. Lubliner, J., Oliver, J., Oller, S. and Oñate, E. (1989), "A plastic-damage model for concrete", International Journal of Solids and Structures, 25(3), 229-326.
  13. Mander, J., Priestley, M. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Qi, H., Guo, L., Liu, J., Gan, D. and Zhang, S. (2011), "Axial load behavior and strength of tubed steel reinforced-concrete (SRC) stub columns", Thin-Walled Structures, 49(9), 1141-1150. https://doi.org/10.1016/j.tws.2011.04.006
  15. Rougiera, V.C. and Luccionia, B.M. (2007), "Numerical assessment of FRP retrofitting systems for reinforced concrete elements", Engineering Structures, 29(8), 1664-1675. https://doi.org/10.1016/j.engstruct.2006.09.008
  16. Shakir-Khalil, H. and Mouli, M. (1990), "Further tests on concrete-filled rectangular hollow-section columns", The Structural Engineer, 68(20), 405-13.
  17. Shanmugam, N.E. and Lakshmi, B. (2001), "State of the art report on steel-concrete composite columns", Journal of Constructional Steel Research, 57(10), 1041-80. https://doi.org/10.1016/S0143-974X(01)00021-9
  18. Tao, Z., Uy, B., Liao, F.Y. and Han, L.H. (2011), "Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression", Journal of Constructional Steel Research, 67(11), 1719-1732. https://doi.org/10.1016/j.jcsr.2011.04.012
  19. Tokgoz, S. and Dundar, C. (2010), "Experimental study on steel tubular columns in-filled with plain and steel fiber reinforced concrete", Thin-Walled Structures, 48(6), 414-422. https://doi.org/10.1016/j.tws.2010.01.009
  20. Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J Constr. Steel Res., 57(1), 113-34. https://doi.org/10.1016/S0143-974X(00)00014-6
  21. Wang, Q., Zhao, D. and Guan, P. (2004), "Experimental study on the strength and ductility of steel tubular columns filled with steel-reinforced concrete", Engineering Structures, 26(7) ,907-915. https://doi.org/10.1016/j.engstruct.2004.02.009
  22. Yu, Q., Tao, Z. and Wu, Y.X. (2008), "Experimental behavior of high performance concrete-filled steel tubular columns", Thin-Walled Structures, 46(4), 362-370. https://doi.org/10.1016/j.tws.2007.10.001
  23. Zeghiche, J. (1988), "Concrete-filled composite columns", M.Sc. Dissertation, University of Manchester, Manchester.
  24. Zhang, X.P. (2001), Nonlinear Analysis for RC Structure, Science Press, Beijing, China. (in Chinese)
  25. Zhao, D.Z., Wang, Q.X. and Guan, P. (2005), "Research on load-bearing capacity of steel tubular columns filled with steel-reinforced high-strength concrete subjected to compression and bending", Ind. Constr., 35(9), 84-93. (in Chines)
  26. Zheng, W. and Ji, J. (2008), "Dynamic performance of angle steel concrete columns under low cyclic loading-I, experimental study", Earthquake Engineering and Engineering Vibration, 7(1), 67-75. https://doi.org/10.1007/s11803-008-0768-0