DOI QR코드

DOI QR Code

Durability characteristics of recycled aggregate concrete

  • 투고 : 2012.08.03
  • 심사 : 2013.08.31
  • 발행 : 2013.09.10

초록

People started to replace natural aggregate with recycled aggregate for a number of years due to disposal problem and certain other potential benefits. Though there are number of drawbacks with use of recycled aggregates like lesser modulus of elasticity, low compressive strength, increase in shrinkage, there are results of earlier studies that use of chemical and mineral admixtures improves the strength and durability of recycled concrete. The use of recycled aggregate from construction and demolition wastes is showing prospective application in construction as alternative to natural aggregates. It conserves lot of natural resources and reduces the space required for the landfill disposal. In the present research work, the effect of recycled aggregate on strength and durability aspects of concrete is studied. Grade of concrete chosen for the present work is M50 (with a characteristic compressive strength of 50 MPa). The recycled aggregates were collected from demolished structure with 20 years of age. Natural Aggregate (NA) was replaced with Recycled Aggregate (RA) in different percentages such as 25, 50 and 100 to understand its effect. The experiments were conducted for different ages of concrete such as 7, 14, 28, 56 days to assess the compressive and tensile strength. Durability characteristics of recycled aggregate concrete were studied with Rapid chloride penetration test (as per ASTMC1202), sorptivity test and acid test to assess resistance against chloride ion penetration, capillary suction and chemical attack respectively. Mix design for 50 MPa gives around 35 MPa after replacing natural aggregate with recycled aggregate in concrete mix and the chloride penetration range also lies in moderate limit. Hence it is understood from the results that replacement of NA with RA is very much possible and will be ecofriendly.

키워드

참고문헌

  1. Abou-Zeid, M.N., Shenouda, M.N., McCabe, S. and El-Tawil, F.A. (2005), "Reincarnation of concrete", Conc. Int., 27(2), 53-59.
  2. ACI 211.1-91, Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete, Reported by ACI Committee 211.
  3. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cem. Conc. Compos., 24(2), 269-279. https://doi.org/10.1016/S0958-9465(01)00012-9
  4. ASTM C1202 (2010), "Standard test method for electrical indication of concrete's ability to resist chloride ion penetration", ASTM International.
  5. ASTM C33 (2013), "Standard specification for concrete aggregates", ASTM International.
  6. Amnon, K. (2003), "Properties of concrete made with recycled aggregate from partially hydrated old concrete", Cem. Conc. Res., 33(5), 703-711. https://doi.org/10.1016/S0008-8846(02)01033-5
  7. Bairagi, N.K. and Kishore, R. (1993), "Behaviour of concrete with different proportions of natural and recycled aggregates", Resource Conservation and Recycling, 9(3), 109-126. https://doi.org/10.1016/0921-3449(93)90036-F
  8. Dhir, R.K., Zhu, W.Z. and McCarthy, M.J. (1998), "Use of portland PFA cement in combination with super plasticizer admixtures", Cem. Conc. Res., 28(9), 1209-1216. https://doi.org/10.1016/S0008-8846(98)00121-5
  9. Etxeberria, M., Vazquez, E., Mari, A. and Barra, M. (2007), "Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete", Cem. Conc. Res., 37(5), 735-742. https://doi.org/10.1016/j.cemconres.2007.02.002
  10. Evangelista, L. and de Brito, J. (2007), "Mechanical behavior of concrete made with fine recycled concrete aggregates", Cem.Conc.Comp., 29, 397-401. https://doi.org/10.1016/j.cemconcomp.2006.12.004
  11. Wang, H.Y., Hsiao, D.H. and Wang, S.Y. (2012), "Properties of recycled green building materials applied in lightweight aggregate concrete", Compt. Concrete, 10(2), 95-104. https://doi.org/10.12989/cac.2012.10.2.095
  12. Kou, S.C., Poon, C.S. and Chan, D.X. (2007), "Influence of fly ash as cement replacement on the properties of recycled aggregate concrete", J. Mat. Civil Engg., 9(9), 709-717.
  13. Mirza, F.A. and Saif, M.A. (2010), "Mechanical properties of recycled aggregate concrete incorporating silica fume", Proc. 2nd Int. Conf. Sust. Constr. Mat. Tech, Coventry University and The University of Wisconsin Milwaukee Centre for By-products Utilization, Ancona, Italy.
  14. Olorunsogo, F.T. and Padayachee, N. (2002), "Performance of recycled aggregate concrete monitored by durability indexes", Cem. Conc. Res., 32, 179-185. https://doi.org/10.1016/S0008-8846(01)00653-6
  15. Park, W.J., Noguchi, T. and Lee, H.S. (2013), "Genetic algorithm in mix proportion design of recycled aggregate concrete", Comput. Concrete, 11(3), 183-199. https://doi.org/10.12989/cac.2013.11.3.183
  16. Poon, C.S., Kou, S.C. and Lam, L. (2007), "Influence of recycled aggregate on slump and bleeding of fresh concrete", Mater. Struct., 40, 981-988. https://doi.org/10.1617/s11527-006-9192-y
  17. Rahal, K. (2007a), "Mechanical properties of concrete with recycled coarse aggregate", Bldg. Environ., 42, 407-415. https://doi.org/10.1016/j.buildenv.2005.07.033
  18. Rahal, K. (2007b), "Mechanical properties of recycled aggregate concrete", Proceedings of the ACI-Kuwait Chapter 2nd Int. Conf.Des.Sust.Str. Concrete in the Middle East with Emphasis on High-Rise Buildings, Kuwait, 299-306.
  19. Ravindrarajah, R.S., Steward, M. and Greco, D. (2000), "Variability of recycled concrete aggregate and its effect on concrete properties: A case study in Australia", Int. workshop on recycled concrete, Australia.
  20. Sagoe, C.K.K., Brown, T. and Taylor, A H. (2001), "Performance of concrete made with commercially produced coarse recycled concrete aggregate", Cem. Conc. Res., 31(5), 707-712. https://doi.org/10.1016/S0008-8846(00)00476-2
  21. Saravanakumar, P. and Dhinakaran, G. (2012), "Effect of admixed recycled aggregate concrete on properties of fresh and hardened concrete", J. Mat. Civil Eng., 24(4), 494-498. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000393
  22. Tavakoli, M. and Soroushian, P. (1996), "Strength of recycled aggregate concrete using field-demolished concrete as aggregate", ACI Mat. J., 93(2), 182-190.
  23. Yamato, T. (1998), "Mechanical properties, drying shrinkage and resistance to freezing and thawing of concrete using recycled aggregate", ACI Special Publication, SP 179-7, 105-121.
  24. Yong, P.C. and Teo, D.C.L. (2009), "Utilization of recycled aggregate as coarse aggregate in concrete", UNIMAS E-J. Civil Eng., 1(1), 1-6.

피인용 문헌

  1. Durability aspects of HVFA-based recycled aggregate concrete vol.66, pp.4, 2014, https://doi.org/10.1680/macr.13.00200
  2. Strength and durability studies on concrete with partial replacement over burnt brick bat waste vol.80, 2017, https://doi.org/10.1088/1755-1315/80/1/012018
  3. Strength criterion of plain recycled aggregate concrete under biaxial compression vol.16, pp.2, 2015, https://doi.org/10.12989/cac.2015.16.2.209
  4. Mechanical properties of recycled aggregate concrete produced with Portland Pozzolana Cement vol.4, pp.1, 2016, https://doi.org/10.12989/acc.2016.4.1.027
  5. Properties of treated recycled aggregates and its influence on concrete strength characteristics vol.111, 2016, https://doi.org/10.1016/j.conbuildmat.2016.02.064
  6. Characteristics of sustainable concrete incorporating recycled coarse aggregates and colloidal nano-silica vol.3, pp.3, 2015, https://doi.org/10.12989/acc.2015.3.3.187
  7. Strength and durability characteristics of ternary blend and lightweight HPC vol.134, 2017, https://doi.org/10.1016/j.conbuildmat.2016.12.201
  8. Strength and Chloride Diffusion Behaviour of Three Generations of Repeated Recycled Fine Aggregate Concrete vol.33, pp.5, 2018, https://doi.org/10.1007/s11595-018-1943-4
  9. Effect of silica fume on mechanical properties of concrete containing recycled asphalt pavement vol.62, pp.3, 2013, https://doi.org/10.12989/sem.2017.62.3.357
  10. Mechanical behavior of concrete comprising successively recycled concrete aggregates vol.5, pp.4, 2013, https://doi.org/10.12989/acc.2017.5.4.303
  11. Effect of using recycled coarse aggregate and recycled asphalt pavement on the properties of pervious concrete vol.67, pp.3, 2013, https://doi.org/10.12989/sem.2018.67.3.283
  12. Quality Improvement Techniques for Recycled Concrete Aggregate: A review vol.17, pp.4, 2013, https://doi.org/10.3151/jact.17.151
  13. Bond Properties of RAC-Filled Square Steel Tubes after High Temperature vol.2019, pp.None, 2013, https://doi.org/10.1155/2019/2413613
  14. Rheological and Mechanical Properties of Ultra-High-Performance Concrete Containing Fine Recycled Concrete Aggregates vol.12, pp.22, 2019, https://doi.org/10.3390/ma12223717
  15. Performance assessment of nano-Silica incorporated recycled aggregate concrete vol.8, pp.4, 2013, https://doi.org/10.12989/acc.2019.8.4.321
  16. Compressive performance of RAC filled GFRP tube-profile steel composite columns under axial loads vol.8, pp.4, 2013, https://doi.org/10.12989/acc.2019.8.4.335
  17. Effect of Graphene Oxide on Mechanical Properties and Durability of Ultra-High-Performance Concrete Prepared from Recycled Sand vol.10, pp.9, 2013, https://doi.org/10.3390/nano10091718
  18. Effect of Parent Concrete on the Performance of Recycled Aggregate Concrete vol.12, pp.22, 2020, https://doi.org/10.3390/su12229399
  19. Mechanical properties and bearing capacity of CFRP confined steel reinforced recycled concrete columns under axial compression loading vol.79, pp.4, 2013, https://doi.org/10.12989/sem.2021.79.4.451