Earthquakes and Structures

  • 제5권3호
  • /
  • Pages.277-296
  • /
  • 2013
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic progressive collapse assessment of 3-story RC moment resisting buildings with different levels of eccentricity in plan

  • Karimiyan, Somayyeh (Int'l Institute of Earthquake Eng. and Seismology (IIEES)) ;
  • Moghadam, Abdolreza S. (Int'l Institute of Earthquake Eng. and Seismology (IIEES)) ;
  • Vetr, Mohammad G. (Int'l Institute of Earthquake Eng. and Seismology (IIEES))
  • 투고 : 2013.04.10
  • 심사 : 2013.06.10
  • 발행 : 2013.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Margin of safety against potential of progressive collapse is among important features of a structural system. Often eccentricity in plan of a building causes concentration of damage, thus adversely affects its progressive collapse safety margin. In this paper the progressive collapse of symmetric and asymmetric 3-story reinforced concrete ordinary moment resisting frame buildings subjected to the earthquake ground motions are studied. The asymmetric buildings have 5%, 15% and 25% mass eccentricity. The distribution of the damage and spread of the collapse is investigated using nonlinear time history analyses. Results show that potential of the progressive collapse at both stiff and flexible edges of the buildings increases with increase in the level of asymmetry in buildings. It is also demonstrated that "drift" as a more easily available global response parameter is a good measure of the potential of progressive collapse rather than much difficult-to-calculate local response parameter of "number of collapse plastic hinges".

키워드

참고문헌

  1. Alashker, Y., Li, H. and EL-Tawil, S. (2011), "Approximations in progressive collapse modeling", J. Struct. Eng., 137, 914-924. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000452
  2. Burnett, E.F.P. (1975a), "Abnormal loading and building safety", American Concrete Institute, Int. Concrete Res.Inform. Portal, SP 48, 141-190.
  3. Bazant, Zdenfk P. and Verdure, Mathieu (2007), "Mechanics of progressive collapse: learning from world trade center and building demolitions", Eng. Mech., 133(3).
  4. Biskinis, D. and Fardis, M.N. (2009), "Deformations of concrete members at yielding and ultimate under monotonic or cyclic loading (including repaired and retrofitted members)", Report Series in Structural and Earthquake Engineering, Report No. SEE 2009-01.
  5. Bao, Yihai., Kunnath, Sashi K., El-Tawil ,Sherif and Lew, H.S. (2012), "Macromodel-based simulation of progressive collapse: RC frame structures", Struct. Eng., 134(7), 1079-1091.
  6. Dides, M.A. and Llera, J.C. (2005), "A comparative study of concentrated plasticity models in dynamic analysis of building structures", J. Earthq. Eng. Struct. Dyn., 34(8), 1005-1026. https://doi.org/10.1002/eqe.468
  7. Ellingwood, B. (2006), "Mitigating risk from abnormal loads and progressive collapse", J. Perform. Constr. Facil., 20, SPECIAL ISSUE: Mitigating the Potential for Progressive Disproportionate Structural Collapse, 315-323. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(315)
  8. El-Tawil, S., Khandelwal, K., Kunnath, S., Lew. H.S. (2007), "Macro models for progressive collapse analysis of steel moment frame buildings", Proc. Structures Congress 2007, Long Beach, CA.
  9. Ettouney, Mohammed, Smilowitz, Robert, Tang, Margaret and Hapij, Adam (2012), "Global system considerations for progressive collapse with extensions to other natural and man-made hazards", J. Perform. Constr. Facil., 20, SPECIAL ISSUE: Mitigating the Potential for Progressive Disproportionate Structural Collapse, 403-417.
  10. Eslami, A. and Ronagh, H.R. (2012), "Effect of elaborate plastic hinge definition on the pushover analysis of reinforced concrete buildings. Struct", J. Des. Tall Spec. Build., doi: 10.1002/tal.1035.
  11. FEMA P695 (2009), Quantification of building seismic performance factors, Prepared by Applied Technology Council, www.ATCouncil.org.
  12. Filippou, F.C. (1999), "Analysis platform and member models for performance-based earthquake engineering", U.S.-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, PEER Report 1999/10, Pacific Earthquake Engineering Research Center, University of California, Berkeley, California, pp. 95-106.
  13. Gurley, C. (2012), "Progressive collapse and earthquake resistance", Pract. Period. Struct. Des. Constr-ASCE, 13(1), 19-23.
  14. Haselton, C.B. and Deierlein, G.G. (2007), "Assessment seismic collapse safety of modern reinforced concrete moment frame building", The John A. Blume Earthquake Engineering Center, Stanford University.
  15. Haselton, C.B., Liel, A.B., Lange, S.T. and Deierlein, G.G. (2008), "Beam-column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings", PEER Report 2007/03, Pacific Earthquake Engineering Research Center, College of Engineering University of California, Berkeley.
  16. Haselton, C.B., Liel, A.B. and Deierlein, G.G. (2008), "Simulating structural collapse due to earthquakes: model idealization, model calibration, and numerical solution algorithms", COMPDYN2009 ,ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  17. Helmy, Huda, Salem, Hamed, Mourad, Sherif (2012), "Progressive collapse assessment of framed reinforced concrete structures according to UFC guidelines for alternative path method", Eng. Struct., 42, 127-141. https://doi.org/10.1016/j.engstruct.2012.03.058
  18. Hayes, Jr., John, R., Woodson, Stanley C., Pekelnicky, Robert G., Poland, Chris D., Corley, W. Gene and Sozen, Mete (2012), "Can strengthening for earthquake improve blast and progressive collapse resistance?", Struct. Eng.- ASCE, 131(8), 1157-1177.
  19. Ibarra, L.F. and Krawinkler, H. (2004), "Global collapse of deteriorating MDOF systems", Proc.13thWorld Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, Paper No. 116.
  20. Ibarra, L.F. (2005), "Global collapse of frame structures under seismic excitations", Ph.D. thesis, Stanford Univ.
  21. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", J. Earthq. Eng. Struct. Dyn., 34, 1489-1511. https://doi.org/10.1002/eqe.495
  22. Kaewkulchai, Griengsak and Williamson, Eric B. (2003), "Beam element formulation and solution procedure for dynamic progressive collapse analysis", Comput. Struct., 82(7-8), 639-651.
  23. Kyakula, M. and Wilkinson, S. (2004), "Analyses of R/C frames subjected to seismic loading", 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, Paper No. 933.
  24. Khandelwala, Kapil, El-Tawila, Sherif, Sadekb, Fahim (2009), "Progressive collapse analysis of seismically designed steel braced frames", Constr. Steel Res., 65(3), 699-708. https://doi.org/10.1016/j.jcsr.2008.02.007
  25. Krawinkler, H., Zareian, F., Lignos, D.G. and Ibarra, L.F. (2009), "Prediction of collapse of structures under earthquake excitations", COMPDYN 2009, ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  26. Kim, J. and Hong, S. (2011), "Progressive collapse performance of irregular buildings", J. Struct. Des. Tall Sp. Build., 20 (6), 721-734. https://doi.org/10.1002/tal.575
  27. Kim, J., Choi, H., Min, K.W. (2011), "Use of rotational friction dampers to enhance seismic and progressive collapse resisting capacity of structures", J. Struct. Des. Tall Sp. Build., 20(4), 515-537. https://doi.org/10.1002/tal.563
  28. Khandelwal, K., El-Tawil, S., Kunnath, S. and Lew, H.S. (2012), "Macromodel-based simulation of progressive collapse: steel frame structures", Struct. Eng., 134(7), 1070-1078.
  29. Lew, H.S. (2003), Best practices guidelines for mitigation of building progressive collapse, National Institute of Standards and Technology, Gaithersburg, Maryland, U.S.A, 20899-8611, hsl@nist.gov.
  30. Lignos, D.G. (2008), "Sidesway collapse of deteriorating structural systems under seismic excitations", Ph.D. Thesis, Stanford Univ.
  31. Lignos, D.G., Zareian, F. and Krawinkler, H. (2008), "Reliability of a 4-story steel moment-resisting frame against collapse due to seismic excitations", ASCE Structures Congress, pp. 1-10.
  32. Lu, X.Z., Lin, X., Ma, Y., Li, Y. and Ye, L. (2008), "Numerical simulation for the progressive collapse of concrete building due to earthquake", Proc. the 14th World Conference on Earthquake Engineering, Beijing, China.
  33. Lu, X.Z., Li, Y., Ye, L.P., Ma, Y.F. and Liang, Y. (2008), "Study on the design methods to resist progressive collapse for building structures", Proc.Tenth Int. Symp. On Structural Engineering for Young Experts., Oct. 2008, Changsha,478-483.
  34. Lignos, D. and Krawinkler, H. (2012), "Development and utilization of structural component databases for performance-based earthquake engineering", J. Struct. Eng., 10.1061/(ASCE) ST.1943-541X.0000646 (Aug. 10, 2012).
  35. Masoero, E., Wittel, F., Herrmann, H. and Chiaia, B. (2010), "Progressive collapse mechanisms of brittle and ductile framed structures", J. Eng. Mech., 136(8), 987-995. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000143
  36. Pekau, O.A. and Cui, Yuzhu (2005), "Progressive collapse simulation of precast panel shear walls during earthquakes", Comput. Struct., 84(5-6), 400-412.
  37. Panagiotakos, T.B. and Fardis, M.N. (2009),"Deformations of rinforced cncrete mmbers at yelding and utimate", Struct. J., 98(2), 135-148.
  38. Sasani, M., Bazan, M. and Sagiroglu, S. (2007), "Experimental and analytical progressive collapse evaluation of an actual RC structure", Struct. J., 104(6), 731-739.
  39. Sasani, M. and Kropelnicki, J. (2008), "Progressive collapse analysis of an RC structure", Struct. Design Tall Spec. Build., 17(4), 757-771. https://doi.org/10.1002/tal.375
  40. Sasani, M. and Sagiroglu, S. (2008), "Progressive collapse resistance of hotel San Diego", J. Struct. Eng., 134(3), 478-488. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:3(478)
  41. Sasani, M. and Sagiroglu, S. (2008), "Progressive collapse of RC structures: a multihazard perspective", Struct. J., 105(1), 96-103.
  42. Somes, N.F. (1973), "Abnormal loading on buildings and progressive collapse", in Building Practices for Disaster Mitigation (Wright, Kramer and Culver, eds.), Building Science Series No. 46, National Bureau of Standards, Washington, DC.
  43. Tsai, Meng-Hao and Lin, Bing-Hui (2008), "Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure", J. Eng. Struct., 30(12), 3619-3628. https://doi.org/10.1016/j.engstruct.2008.05.031
  44. Talaat, M. and Mosalam, K.M. (2009), "Modeling progressive collapse in reinforced concrete buildings using direct element removal", Earthq. Eng. Struct. Dyn., 38, 609-634. https://doi.org/10.1002/eqe.898
  45. Yi, L.I., Lu, Xin-Zheng and Ye, Lie-Ping (2011), "Study on the progressive collapse mechanism of RC frame structures", Build. Sci., 27(5), 12-18.
  46. Zareian, F., Lignos D.G. and Krawinkler, H. (2009), "Quantification of modeling uncertainties for collapse assessment of structural systems under seismic excitations", COMPDYN 2009, ECCOMAS Thematic Conference on, Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  47. Zareian, F. and Medina, R.A. (2010), "A practical method for proper modeling of structural damping in inelastic plane structural systems", Comput.Struct., 88, 45-53. https://doi.org/10.1016/j.compstruc.2009.08.001

피인용 문헌

  1. Effect of base isolation systems on increasing the resistance of structures subjected to progressive collapse vol.9, pp.3, 2015, https://doi.org/10.12989/eas.2015.9.3.639
  2. Seismic collapse propagation in 6-story RC regular and irregular buildings vol.5, pp.6, 2013, https://doi.org/10.12989/eas.2013.5.6.753
  3. Unified equivalent frame method for flat plate slab structures under combined gravity and lateral loads - Part 2: verification vol.7, pp.5, 2014, https://doi.org/10.12989/eas.2014.7.5.735
  4. Progressive collapse vulnerability in 6-Story RC symmetric and asymmetric buildings under earthquake loads vol.6, pp.5, 2014, https://doi.org/10.12989/eas.2014.6.5.473
  5. Earthquake induced torsion in buildings: critical review and state of the art vol.8, pp.2, 2015, https://doi.org/10.12989/eas.2015.8.2.305
  6. Evaluation of Collapse Distribution in Three-Story RC Moment-Resisting Asymmetric Buildings due to Earthquake Loads vol.15, pp.5, 2017, https://doi.org/10.1007/s40999-017-0197-4
  7. Seismic Behavior of Horizontally Irregular Structures: Current Wisdom and Challenges Ahead vol.68, pp.6, 2016, https://doi.org/10.1115/1.4034725
  8. Probabilistic assessment of plan-asymmetric structures under the near-fault pulse-like events considering soil–structure interaction pp.2048-4011, 2018, https://doi.org/10.1177/1369433218798305
  9. Effect of Earthquake characteristics on seismic progressive collapse potential in steel moment resisting frame vol.12, pp.5, 2017, https://doi.org/10.12989/eas.2017.12.5.529
  10. Comparison of seismic progressive collapse distribution in low and mid rise RC buildings due to corner and edge columns removal vol.18, pp.5, 2013, https://doi.org/10.12989/eas.2020.18.5.649
  11. Comparison of seismic progressive collapse distribution in low and mid rise RC buildings due to corner and edge columns removal vol.18, pp.6, 2013, https://doi.org/10.12989/eas.2020.18.6.691
  12. Seismic progressive collapse mitigation of buildings using cylindrical friction damper vol.20, pp.1, 2021, https://doi.org/10.12989/eas.2021.20.1.001