열충격 시험을 통한 LED Package의 박리재현 및 특성에 관한 연구

A Research on the reappearance of delamination and the characteristic of LED package by thermal shock test

  • 투고 : 2013.08.23
  • 심사 : 2013.09.13
  • 발행 : 2013.09.25

초록

This paper, we classified LED failure mechanisms that occur due to the delamination and analyzed each of the mechanism that gives the LED PKGs the effect. Usually, the LED is composed of several materials which are LED chips, gold wire, phosphor, epoxy resin, adhesive, reflector and lead frame. These different materials are usually delaminated in trouble conditions which are huge temperature difference, hot and humid or mechanical shocked. When the components are delaminated, a luminance will be lost and moisture be absorbed easily, a thermal resistance be increased attendantly. In this paper, we experimented to investigate failure mechanism of the thermal resistance and failure mechanism of the decrease of luminance that occur due to the delamination. A thermal shock test was performed to reproduce this phenomena by subjecting samples to a cold-hot cyclling process between $-30^{\circ}C$(15min) and $110^{\circ}C$(15min). The samples were inspected at 200, 600 and 1,000 cycles. We measured feature of LED using the spatial analyzer, optical microscope, thermal resistance, photometer, scanning electron microscope (SEM). As a result, the progression of the crack and the thermal resistance and decrease in luminance are proportional to number of thermal shock.

키워드

참고문헌

  1. 장인혁, 한지훈, 고민지, 이영주, 임홍우 (2013), 열충격시험을 통한 LED 박리 평각법에 관한 연구, 신뢰성응용연구, 제 6권, 제2호, pp. 121-124.
  2. 주은철(2011), LED/OLED 최신 산업동향 및 혁신기술 동향분석, BIR.
  3. J. Liu, W. S. Tam, H. Wong, V. Filip. (2009), Temperature-dependent light-emitting characterisitics of InGaN/GaN diodes. Microelectronics Reliability pp. 38-41.
  4. L. Yang, J. Hu, L. Kim, M. H. Shin. (2008), Thermal Analysis of GaN-Based Light Emitting Diodes With Different Chip Sizes. IEEE Transaction on device and materials reliability, Vol. 8, No.
  5. M. Meneghini, Tazzoli, G. Mura, G. Meneghesso, E. Zanoni. (2010), A Review on the Phisical Mechanisms That Limit the Reliability of GaN-Based LEDs. IEEE Transaction on electron device, Vol. 57, No. 1. https://doi.org/10.1109/TED.2010.2048059
  6. R. D. Dupuis and M. R. Krames(2008), "History, development, and applications of high-brightness visible light-emitting diodes", J. Lightw. Technol., vol. 26, no. 9, pp. 1154-1171. https://doi.org/10.1109/JLT.2008.923628