DOI QR코드

DOI QR Code

Effect of corrosion pattern on the ductility of tensile reinforcement extracted from a 26-year-old corroded beam

  • Zhu, Wenjun (Universite de Toulouse, UPS, INSA, LMDC (Laboratoire Materiaux et Durabilite des Constructions)) ;
  • Francois, Raoul (Universite de Toulouse, UPS, INSA, LMDC (Laboratoire Materiaux et Durabilite des Constructions))
  • 투고 : 2012.11.23
  • 심사 : 2013.04.18
  • 발행 : 2013.06.01

초록

Tension tests were carried out to investigate the effect of the corrosion pattern on the ductility of tension bars extracted from a 26-year-old corroded reinforced concrete beam. The tensile behavior of corroded bars with different corrosion patterns was examined carefully, as were two non-corroded bars extracted from a 26-year-old control beam. The results show that corrosion leads to an increase in the ratio of the ultimate strength over the yield strength, but reduces the ultimate strain at maximum force of the reinforcement. Both the corrosion pattern and the corrosion intensity play an important role in the ductile properties. The asymmetrical distribution of the corrosion around the surface is a decisive factor, which can influence the ultimate strain at maximum force more seriously.

키워드

참고문헌

  1. Ahmad, S. (2003), "Reinforcement corrosion in concrete structures, its monitoring and service life prediction-a review", Cem. Concr. Composit., 25(4-5), 459-471. https://doi.org/10.1016/S0958-9465(02)00086-0
  2. Almusallam, A.A. (2001), "Effect of degree of corrosion on the properties of reinforcing steel bars", Construct Build Mater, 15(8), 361-368.
  3. Apostolopous, C.A., Papadopoulus, M.P. and Pantelakis, S.G. (2006), "Tensile behavior of corroded reinforcing steel bars BSt 500s", Construct. Build. Mater., 20(9), 782-789. https://doi.org/10.1016/j.conbuildmat.2005.01.065
  4. B.A.E.L. (1983), French regulations for reinforced concrete structures.
  5. Bhargava, K., Ghosh, A.K., Mori, Y. and Ramanujam, S. (2006), "Model for cover cracking due to rebar corrosion in RC structures", Eng. Struct., 28(8), 1093-1109. https://doi.org/10.1016/j.engstruct.2005.11.014
  6. BS EN 1992-1-1 Eurocode 2, Design of concrete structures-Part 1-1: General rules and rules for buildings, October 2005.
  7. Cairns, J., Plizzari, G.A., Du, Y.G., Law, D.W. and Franzoni, C. (2005), "Mechanical properties of corrosion-damaged reinforcement", ACI Mater. J., 102(4), 256-264.
  8. Care, S., Nguyen, Q.T., L'hostis, V. and Berthaud, Y. (2008), "Mechanical properties of the rust layer induced by impressed current method in reinforced mortar", Cem. Concr. Res., 38(8), 1079-1091. https://doi.org/10.1016/j.cemconres.2008.03.016
  9. Castel, A., Francois, R. and Arligue, G. (2000), "Mechanical behaviour of corroded reinforced concrete beams-Part 2: Bond and notch effects", Mater. Struct., 33(9), 545-551. https://doi.org/10.1007/BF02480534
  10. Coronelli, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete beams: modeling guidelines", J. Struct. Eng. ASCE, 130(8), 1214-1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
  11. Cosenza, E., Greco, C. and Manfredi, G. (1998), An Equivalent steel Index in the Assessment of ductility Performances of the Reinforcement, CEB Bulletin No. 242.
  12. Francois, R., Khan, I. and Dang, V.H. (2013), "Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams", Mater. Struct., 46(6), 899-910. https://doi.org/10.1617/s11527-012-9941-z
  13. Khan, I., Francois, R. and Castel, A. (2011), "Mechanical behavior of long-term corroded reinforced concrete beam", Model. Corr. Conc. Struct., 5(10), 243-258.
  14. Kreit, A., Al-Mahmoud, F., Castel, A. and Francois, R.(2011), "Repairing corroded RC beam with near-surface mounted CFRP rods", Mater. Struct., 44(7), 1205-1217. https://doi.org/10.1617/s11527-010-9693-6
  15. Lee, H.S. and Cho, Y.S. (2009), "Evaluation of the mechanical properties of steel reinforcement embedded in concrete specimen as a function of the degree of reinforcement corrosion", Int. J. Frat., 157(1-2), 81-88. https://doi.org/10.1007/s10704-009-9334-7
  16. Maslehuddin, M., Ibrahim, I.M., Al-Sulaimani, G.J., Al-Mana, A. and Abduljauwad, S.N. (1990), "Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete", ACI Mater. J., 87(5), 496-502.
  17. Palsson, R. and Mirza, M.S. (2002), "Mechanical response of corroded steel reinforcement of abandoned concrete bridge", ACI Struct. J., 99(2), 157-162.
  18. Stewart, M.G. (2009), "Mechanical behaviour of pitting corrosion of flexural and shear reinforcement and its effect on structural reliability of corroding RC beams", Struct. Safety, 31(1), 19-30. https://doi.org/10.1016/j.strusafe.2007.12.001
  19. Strategic High Research Program (1989), Concrete and structure: Progress and product update, Washington DC, National Research Council.
  20. Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cem. Concr. Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1
  21. Wong, H.S., Zhao, Y.X., Karimi, A.R. and Jin, W.L. (2010), "On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion", Corros. Sci., 52(7), 2469-2480. https://doi.org/10.1016/j.corsci.2010.03.025
  22. Zhang, R.J., Castel, A. and Francois, R. (2009), "The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment", Cem. Concr. Res., 39(11), 1077-1086. https://doi.org/10.1016/j.cemconres.2009.07.025
  23. Zhu, W.J. and Francois, R. (2012), "Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam", Proceeding of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, Cape Town, South Africa, September.
  24. Zhu, W.J., Francois, R. and Coronelli, D. (2012), "Effect of corrosion of reinforcement on the coupled shear and bending behaviour of reinforced concrete beam", Proceeding of the 6th International Conference on Bridge Maintenance, Safety and Management, Stresa, Lake Maggiore, Italy, July.

피인용 문헌

  1. Structural performance of RC beams in relation with the corroded period in chloride environment vol.48, pp.6, 2015, https://doi.org/10.1617/s11527-014-0270-2
  2. Effect of simulated pitting corrosion on the tensile properties of steel vol.131, 2017, https://doi.org/10.1016/j.conbuildmat.2016.11.037
  3. Structural response of corroded RC beams: a comprehensive damage approach vol.15, pp.3, 2015, https://doi.org/10.12989/cac.2015.15.3.411
  4. Prediction of ductility factor of corroded reinforced concrete beams exposed to long term aging in chloride environment vol.53, 2014, https://doi.org/10.1016/j.cemconcomp.2014.06.002
  5. Seismic damage estimation of reinforced concrete framed structures affected by chloride-induced corrosion vol.9, pp.4, 2015, https://doi.org/10.12989/eas.2015.9.4.851
  6. Performance of corroded bridge piers under cyclic loading vol.170, pp.4, 2017, https://doi.org/10.1680/jbren.16.00001
  7. A FEM-based model to study the behaviour of corroded RC beams shear-repaired by NSM CFRP rods technique vol.131, 2015, https://doi.org/10.1016/j.compstruct.2015.06.030
  8. Behaviour of corroded shear-critical reinforced concrete beams repaired with NSM CFRP rods vol.123, 2015, https://doi.org/10.1016/j.compstruct.2014.12.043
  9. Failure mode transitions of corroded deep beams exposed to marine environment for long period vol.96, 2015, https://doi.org/10.1016/j.engstruct.2015.04.004
  10. Propagation of corrosion and corrosion patterns of bars embedded in RC beams stored in chloride environment for various periods vol.145, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.210
  11. Membrane behavior in RC slabs subjected to simulated reinforcement corrosion vol.123, 2016, https://doi.org/10.1016/j.engstruct.2016.05.040
  12. Strength decay of RC sections for chloride attack vol.7, pp.2, 2016, https://doi.org/10.1108/IJSI-09-2014-0043
  13. Effects of corrosion on the behaviour of precast concrete floor systems vol.145, 2017, https://doi.org/10.1016/j.conbuildmat.2017.04.044
  14. Cyclic Behavior of Corroded Reinforced Concrete Bridge Piers vol.22, pp.7, 2017, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001043
  15. Experimental investigation of the relationships between residual cross-section shapes and the ductility of corroded bars vol.69, 2014, https://doi.org/10.1016/j.conbuildmat.2014.07.059
  16. Structural performance of RC beams damaged by natural corrosion under sustained loading in a chloride environment vol.96, 2015, https://doi.org/10.1016/j.engstruct.2015.04.001
  17. Probabilistic prediction model for average bond strength at steel–concrete interface considering corrosion effect vol.99, 2015, https://doi.org/10.1016/j.engstruct.2015.04.036
  18. Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns vol.76, 2014, https://doi.org/10.1016/j.engstruct.2014.06.043
  19. Prediction of the residual load-bearing capacity of naturally corroded beams using the variability of tension behaviour of corroded steel bars vol.12, pp.2, 2016, https://doi.org/10.1080/15732479.2014.996165
  20. Mechanical performance of deep beams damaged by corrosion in a chloride environment 2016, https://doi.org/10.1080/19648189.2016.1210033
  21. Assessment of Stress-Strain Behavior of Corroded Steel Reinforcement Using Digital Image Correlation (DIC) vol.46, pp.5, 2018, https://doi.org/10.1520/JTE20160487
  22. Effect of corrosion on flexural strength of reinforced concrete beams with polypropylene fibers vol.185, pp.None, 2018, https://doi.org/10.1016/j.conbuildmat.2018.07.021
  23. Corrosion Behavior of Galvanized Steel Embedded in Concrete Exposed to Soil Type MH Contaminated With Chlorides vol.6, pp.None, 2013, https://doi.org/10.3389/fmats.2019.00257
  24. Investigations on the behaviour of corrosion damaged gravity load designed beam-column sub-assemblages under reverse cyclic loading vol.16, pp.2, 2013, https://doi.org/10.12989/eas.2019.16.2.235
  25. A simplified estimation approach for service life of steel bar within concrete vol.11, pp.3, 2013, https://doi.org/10.1177/1687814019837399
  26. A new method for corrosion assessment of reinforcing bars based on close‐range photogrammetry: Experimental validation vol.20, pp.3, 2019, https://doi.org/10.1002/suco.201800196
  27. Numerical analysis of concrete degradation due to chloride-induced steel corrosion vol.7, pp.4, 2013, https://doi.org/10.12989/acc.2019.7.4.203
  28. Seismic performance of existing water tank after condition ranking using non-destructive testing vol.11, pp.4, 2013, https://doi.org/10.1007/s40091-019-00241-x
  29. Corrosion initiation time models in RC coastal structures based on reliability approach vol.9, pp.2, 2013, https://doi.org/10.12989/acc.2020.9.2.149
  30. Algorithms to measure carbonation depth in concrete structures sprayed with a phenolphthalein solution vol.9, pp.3, 2013, https://doi.org/10.12989/acc.2020.9.3.257
  31. Simulating behaviour of large reinforced concrete beam-column joints subject to ASR/DEF deterioration and influence of corrosion vol.222, pp.None, 2020, https://doi.org/10.1016/j.engstruct.2020.111064