DOI QR코드

DOI QR Code

Evaluation of early age mechanical properties of concrete in real structure

  • Wang, Jiachun (Department of Civil Engineering, Xiamen University of Technology) ;
  • Yan, Peiyu (Department of Civil Engineering, Tsinghua University)
  • 투고 : 2012.05.06
  • 심사 : 2012.12.20
  • 발행 : 2013.07.01

초록

The curing temperature is known to influence the rate of mechanical properties development of early age concrete. In realistic sites the temperature of concrete is not isothermal $20^{\circ}C$, so the paper measured adiabatic temperature increases of four different concretes to understand heat emission during hydration at early age. The temperature-matching curing schedule in accordance with adiabatic temperature increase is adopted to simulate the situation in real massive concrete. The specimens under temperature-matching curing are subjected to realistic temperature for first few days as well as adiabatic condition. The mechanical properties including compressive strength, splitting strength and modulus of elasticity of concretes cured under both temperature-matching curing and isothermal $20^{\circ}C$ curing are investigated. The results denote that comparing temperature-matching curing with isothermal $20^{\circ}C$ curing, the early age concretes mechanical properties are obviously improved, but the later mechanical properties of concretes with pure Portland and containing silica fume are decreased a little and still increased for concretes containing fly ash and slag. On this basement using an equivalent age approach evaluates mechanical properties of early age concrete in real structures, the model parameters are defined by the compressive strength test, and can predict the compressive strength, splitting strength and elasticity modulus through measuring or calculating by finite element method the concreted temperature at early age, and the method is valid, which is applied in a concrete wall for evaluation of crack risking.

키워드

참고문헌

  1. Atrushi, D. and Bosnjak, D. (2000), "Tensile creep of young high performance concrete", 3rd International PhD Symposium in Civil Engineering, Vienna.
  2. Ballim, Y. (2004), "A numerical model and associated calorimeter for predicting temperature profiles in mass concrete", Cement Concrete Comp., 26(6), 695-703. https://doi.org/10.1016/S0958-9465(03)00093-3
  3. Bazant, Z.P. (1984), "Double-power logarithmic law for concrete creep", Cement Concrete Res., 14(6), 793-806. https://doi.org/10.1016/0008-8846(84)90004-8
  4. Breugel, V.K. (1998), "Prediction of temperature development in hardening concrete", Prevention of thermal cracking in concrete at early ages, Editor Springenschmid, R., RILEM Report 15, E. Spon, London.
  5. Broda, M., Wirquin, E. and Duthoit, B. (2002), "Conception of an isothermal calorimeter for concrete determination of the apparent activation energy", Mater. Struct., 35(7), 389-394.
  6. Farry, A.L.A., Bijen, J.M. and Haan, Y.M. (1989), "The reaction of fly ash in concrete, a critical examination", Cement Concrete Res., 19(2), 235-246. https://doi.org/10.1016/0008-8846(89)90088-4
  7. Lu,G., Li, XB. And Wang, K. and Kejin, W. (2012), "A numerical study on the damage of projectile impact on concrete targets", Comput. Concrete, 9(1), 21-33. https://doi.org/10.12989/cac.2012.9.1.021
  8. Gutsch, A.W. (2002), "Properties of early age concrete-experiments and modeling", Mater. Struct., 35(2), 76-79.
  9. Hans, B., Mark, A. and Yunus, B. (2012), "Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios", Construct. Build. Mater., 29(4), 533-540. https://doi.org/10.1016/j.conbuildmat.2011.06.018
  10. Hansen, P.F. and Pedersen, J. (1977), "Maturity computer of controlled curing and hardening of concrete". Nordisk Betong, 1, 19-34.
  11. Kahouadji, A., Clastres, P. and Debicki, G. (1997), "Early-age compressive strength prediction of concrete - application on a construction site", Construct. Build. Mater., 11(7-8), 431-436. https://doi.org/10.1016/S0950-0618(97)00022-6
  12. Kim, T.H., Park, J.G., Kim, Y.J. and Shin, H.M. (2008), "A computational platform for seismic performance assessment of reinforced concrete bridge piers with unbonded reinforcing or prestressing bars", Comput. Concrete, 5(2), 135-154. https://doi.org/10.12989/cac.2008.5.2.135
  13. Kim, T.H., Cheon, J.H. and Shin, H.M. (2012), " Evaluation of behavior and strength of prestressed concrete deep beams using nonlinear analysis", Comput. Concrete, 9(1), 63-79. https://doi.org/10.12989/cac.2012.9.1.063
  14. Kjellsen, K.O., Detwiler, R.J. and Gjorv, O.E. (1991), "Development of microstructure in plain cement pastes hydrated at different temperatures", Cement Concrete Res., 21(1), 179-189. https://doi.org/10.1016/0008-8846(91)90044-I
  15. Jiachun, W. and Peiyu, Y. (2007), "Apparent activation energy of concrete in early age determined by adiabatic test", J. Wuhan U. Tech., 22(5), 537-541. https://doi.org/10.1007/s11595-006-3537-9
  16. Lu, W.Y., Hwang, S.J. and Lin, I.J. (2010), "Deflection prediction for reinforced concrete deep beams", Comput. Concrete, 7(1), 1-16. https://doi.org/10.12989/cac.2010.7.1.001
  17. Maria, K. (2002), "Early age properties of high-strength/high-performance concrete", Cement Concrete Comp., 24(2), 253-261. https://doi.org/10.1016/S0958-9465(01)00014-2
  18. Schutter, G. (2002), "Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws", Comput. Struct., 80(27-30), 2035-2042. https://doi.org/10.1016/S0045-7949(02)00270-5
  19. Schutter, G. (2002), "Fundamental study of early age concrete behaviour as a basis for durable concrete structures", Mater. Struct., 35(1), 15-21. https://doi.org/10.1007/BF02482085
  20. Sukumar, B., Nagamani, K. and Srinivasa Raghavan, R. (2008), "Evaluation of strength at early ages of self-compacting concrete with high volume fly ash", Construct. Build. Mater., 22(7), 1394-1401. https://doi.org/10.1016/j.conbuildmat.2007.04.005
  21. Springenschmid, R. (1998), Prevention of thermal cracking in concrete at early ages, E&FN Spon, London.
  22. Wirquin, E., Broda, M. and Duthoit, B. (2002), "Determination of the apparent activation energy of one concrete by calorimetric and mechanical means influence of a superplasticizer", Cement Concrete Res., 32(8), 1207-1213. https://doi.org/10.1016/S0008-8846(02)00770-6
  23. Hammer, T.A., Kanstad, T., Bjontegaard, O. and Sellevold, E.J. (2003), "Mechanical properties of young Concrete: part I:Experimental results related to test methods and temperature effects", Mater. Struct. , 36, 218-225.
  24. Zhenhuan, S. and Yong, L. (2011), "Numerical simulation of concrete confined by transverse reinforcement", Comput. Concrete, 8(1), 23-41. https://doi.org/10.12989/cac.2011.8.1.023

피인용 문헌

  1. A treatise on irregular shaped concrete test specimens vol.16, pp.1, 2015, https://doi.org/10.12989/cac.2015.16.1.179
  2. Restoring-force model of modified RAC columns with silica fume and hybrid fiber vol.24, pp.11, 2017, https://doi.org/10.1007/s11771-017-3680-9
  3. Influence of High-Temperature Curing on the Properties of the Concrete Containing Ground Iron and Steel Slag vol.507, pp.1662-7482, 2014, https://doi.org/10.4028/www.scientific.net/AMM.507.337
  4. Numerical identification of the thermal properties of early age concrete using inverse heat transfer problem pp.1432-1181, 2019, https://doi.org/10.1007/s00231-018-2504-2
  5. Influence of Early Age on the Wave Velocity and Dynamic Compressive Strength of Concrete Based on Split Hopkinson Pressure Bar Tests vol.2018, pp.1875-9203, 2018, https://doi.org/10.1155/2018/8206287
  6. An improvement on the concrete exothermic models considering self-temperature duration vol.19, pp.6, 2013, https://doi.org/10.12989/cac.2017.19.6.659
  7. Micro-scale FEM Calculation of Concrete Temperature during Production and Casting vol.35, pp.1, 2013, https://doi.org/10.1007/s11595-020-2234-4
  8. Influence of curing age on the mechanical properties of fly ash concrete exposed to elevated temperature vol.22, pp.suppl1, 2021, https://doi.org/10.1002/suco.202000155