DOI QR코드

DOI QR Code

Predictive modeling of concrete compressive strength based on cement strength class

  • Papadakis, V.G. (Department of Environmental and Natural Resources Management, University of Western Greece) ;
  • Demis, S. (Department of Civil Engineering, University of Patras/AEIPLOUS Institute for Innovation & Sustainable Development)
  • Received : 2012.04.12
  • Accepted : 2012.12.11
  • Published : 2013.06.01

Abstract

In the current study, a method for concrete compressive strength prediction (based on cement strength class), incorporated in a software package developed by the authors for the estimation of concrete service life under harmful environments, is presented and validated. Prediction of concrete compressive strength, prior to real experimentation, can be a very useful tool for a first mix screening. Given the fact that lower limitations in strength have been set in standards, to attain a minimum of service life, a strength approach is a necessity. Furthermore, considering the number of theoretical attempts on strength predictions so far, it can be seen that although they lack widespread accepted validity, certain empirical expressions are still widely used. The method elaborated in this study, it offers a simple and accurate, compressive strength estimation, in very good agreement with experimental results. A modified version of the Feret's formula is used, since it contains only one adjustable parameter, predicted by knowing the cement strength class. The approach presented in this study can be applied on any cement type, including active additions (fly ash, silica fume) and age.

Keywords

References

  1. Aitcin, P.C. and Lessard, M. (1994), "Canadian experience with air-entrained high-performance concrete", Concrete Int., 16(10), 35-38.
  2. Aitcin, P.C. and Neville, A. (2003), "How the water-cement ratio affects concrete strength", Concrete Int., 25(8), 51-58.
  3. Al-Salloum, Y.A., Shah, A.A., Abbas, H., Alsayed, S.H., Almusallam, T.H. and Al-Haddad, M.S. (2012), "Prediction of compressive strength of concrete using neural networks", Comput. Concrete, 10(2), 197-217 https://doi.org/10.12989/cac.2012.10.2.197
  4. Antiohos, S. and Tsimas, S. (2003), "Chloride resistance of concrete incorporating two types of fly ashes and their intermixtures. The effect of the active silica content", Proceedings of the 6th CANMET/ACI International Conference on Durability of Concrete, Thessaloniki, Greece, 115-129.
  5. Badogiannis, E., Papadakis, V.G., Chaniotakis, E. and Tsivilis, S. (2004), "Exploitation of poor greek kaolins: Strength development of metakaolin concrete and evaluation by means of k-value", Cement Concrete Res., 34(6), 1035-1041. https://doi.org/10.1016/j.cemconres.2003.11.014
  6. Barbhuiya, S.A., Gbagbo, J.K., Russell, M.I. and Basheer, P.A.M. (2009), "Properties of fly ash concrete modified with hydrated lime and silica fume", Constr. Build. Mater., 23(10), 3233-3239. https://doi.org/10.1016/j.conbuildmat.2009.06.001
  7. Bensted, J. (1983), Hydration of portland cement, advances in cement technology, New York, Pergamon Press, 307-347.
  8. Bilek, V. (2003), "Investigation of long-term mechanical properties of high strength concrete", Proceedings of the 6th CANMET/ACI International conference on durability of concrete, Thessaloniki, Greece, 211-223.
  9. Bilgehan, M. and Turgut, T. (2010), "The use of neural networks in concrete compressive strength estimation", Comput. Concrete, 7(3), 271-283 https://doi.org/10.12989/cac.2010.7.3.271
  10. Brameshuber, W. and Schroder, P. (2003), "Influence of the hydration age on frost and de-icing salt resistance of concrete with blast furnace slag cement", Proceedings of the 6th CANMET/ACI International Conference on Durability of Concrete, Thessaloniki, Greece, 99-113.
  11. Brunauer, S. and Copeland, L.E. (1964), The chemistry of concrete, Scientific American, 210, 80-89. https://doi.org/10.1038/scientificamerican0464-80
  12. CEN EN 197-1, (2000), European standard EN 197-1 (2000) cement ? Part 1: Composition, specifications and conformity criteria for common cements, Brusells: European Committee for Standardization.
  13. CEN EN 206-1, (2000), European standard EN 206-1 (2000) concrete ? Part 1: Specification, performance, production and conformity, Brussels: European Committee for Standardization
  14. Climent, M.A., De Vera, G., Lopez, J.F., Viqueira, E. and Andrade, C. (2002), "A test method for measuring chloride diffusion coefficients through non saturated concrete ? Part I. The instantaneous plane source diffusion case", Cement Concrete Res., 32(7), 1136-1123.
  15. De Larrard, F. (1995), "A model for predicting the compressive strength of structural fly ash concrete", Proceedings of the 5th CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete, Milwaukee, Wisconsin, USA, SP-153, 99-108.
  16. Demis, S. and Papadakis, V.G. (2012), "A software-assisted comparative assessment of the effect of cement type on concrete carbonation and chloride ingress", Comput. Concrete, 10(4), 373-389.
  17. Frigione, G. (1983), Gypsum in cement, Advances in Cement Technology, New York: Pergamon Press, 485-535.
  18. Jennings, H.M. (1983), The developing microstructure in Portland cement, Advances in Cement Technology, New York: Pergamon Press.
  19. Illston, J.M. and Domone, P.L.J. (2001), Construction materials - Their nature and behaviour, London: Spon Press.
  20. Jasiczak, J. and Szymanski, P. (2005), lnfluence of different kinds of cement on early shrinkage of concrete, International Conference on Cement Combinations for Durable Concrete, Dundee, Scotland, 399-406.
  21. Kasperkiewicz, J. (1994), "Optimization of concrete mix using a spreadsheet package", ACI Mater. J., 91(6), 551-559.
  22. Kim, D., Lee, J.J., Chang, S.K. and Nocete, C.F.M. (2009), "An improved application technique of the adaptive probabilistic neural network for predicting concrete strength", Comput. Mater. Sci., 44(3), 988-998. https://doi.org/10.1016/j.commatsci.2008.07.012
  23. Kockal, N.U. and Turker, F. (2007), "Effect of environmental conditions on the properties of concretes with different cement types." Constr. Build. Mater., 21(3), 634-645. https://doi.org/10.1016/j.conbuildmat.2005.12.004
  24. Lea, F.M. (1970), The Chemistry of cement and concrete, London: Edward Arnold (Publishers) Ltd.
  25. Liu, M. (2010), "Self-compacting concrete with different levels of pulverized fuel ash", Constr. Build. Mater., 24(7), 1245-1252. https://doi.org/10.1016/j.conbuildmat.2009.12.012
  26. Mousavi, S.M., Gandomi, A.H., Alavi, A.H. and Vesalimahmood, M. (2010), "Modelling of compressive strength of HPC mixes using a combined algorithm of genetic programming and orthogonal least squares", Struct. Eng. Mech., 36(2), 225-241. https://doi.org/10.12989/sem.2010.36.2.225
  27. Neville, A.M. (1995), Properties of concrete, Essex: Longman.
  28. Oner, A. and Akyuz, S. (2007), "An experimental study on optimum usage of GGBS for the compressive strength of concrete", Cement Concrete Compos., 29(6), 505-514. https://doi.org/10.1016/j.cemconcomp.2007.01.001
  29. Pann, K.S., Yen, T., Tang, C.W. and Lin, T.D. (2003), "New strength model based on water -cement ratio and capillary porosity", ACI Mater. J., 100(4), 311-318.
  30. Papadakis, V.G., Vayenas, C.G. and Fardis, M.N. (1991), "Fundamental modeling and experimental investigation of concrete carbonation", ACI Mater. J., 88(4), 363-373.
  31. Papadakis, V.G. (1999), Supplementary cementing materials in concrete - Activity, durability and planning. Final Report to European Commission, Project No. ERBFMBICT961387, Taastrup: Danish Technological Institute.
  32. Papadakis, V.G., Antiohos, S. and Tsimas, S. (2002), "Supplementary cementing materials in concrete - Part II: A fundamental estimation of the efficiency factor", Cement Concrete Res., 32(10), 1533-1538. https://doi.org/10.1016/S0008-8846(02)00829-3
  33. Papadakis, V.G. and Tsimas, S. (2002), "Supplementary cementing materials in concrete - Part I: Efficiency and design", Cement Concrete Res., 32(10), 1525-1532. https://doi.org/10.1016/S0008-8846(02)00827-X
  34. Papadakis, V.G., Efstathiou, M.P. and Apostolopoulos, C.A. (2007), "Computer-aided approach of parameters influencing concrete service life and field validation", Comput. Concrete, 4(1), 1-18. https://doi.org/10.12989/cac.2007.4.1.001
  35. Papadakis, V.G. and Demis, S. (2011), "Estimation and validation of concrete strength and service life using software packages based on predictive models", Proceedings of the 12th International Conference on Durability of Building Materials and Components, Porto Portugal.
  36. Popovics, S. (1998), "History of mathematical model for strength development of Portland cement concrete", ACI Mater. J., 95(5), 593-600.
  37. Szilagyi, H., Ioani, A. and Corbu, O. (2007), "Self compacting concrete with silica fume - procedure for mix design", Proceedings of the 3rd Central European Congress on Concrete Engineering, Visegrad, Hungary, 167-172.
  38. Selih, J., Tritthart, J. and Strupi-Suput, J. (2003), "Durability of portland limestone powder-cement concrete", Proceedings of the 6th CANMET/ACI International Conference on Durability of Concrete, Thessaloniki, Greece, 147-161.
  39. Taylor, H.F.W. (1997), Cement chemistry, London: Thomas Telford Publishing.
  40. Van Breugel, K.(1991), Simulation of hydration and formation of structure in hardening cement-based materials, Delft: Proefschrift Technische Universiteit Delft
  41. Tsivilis, S., Tsantilas, J., Kakali, G., Chaniotakis, E. and Sakellariou, A. (2003), "The permeability of Portland limestone cement concrete", Cement Concrete Res., 33(9), 1465-1471. https://doi.org/10.1016/S0008-8846(03)00092-9
  42. Viviani, M., Glisic, B., Scrivener, K.L. and Smith, I.F.C. (2008), "Equivalency points: Predicting concrete compressive strength evolution in three days", Cement Concrete Res., 38(8-9), 1070-1078. https://doi.org/10.1016/j.cemconres.2008.03.006

Cited by

  1. Computer-aided modeling of concrete service life vol.47, 2014, https://doi.org/10.1016/j.cemconcomp.2013.11.004
  2. Sustainable concrete mix design for a target strength and service life vol.12, pp.6, 2013, https://doi.org/10.12989/cac.2013.12.6.755
  3. Plant Design and Economics of Rice Husk Ash Exploitation as a Pozzolanic Material vol.6, pp.5, 2015, https://doi.org/10.1007/s12649-015-9412-1
  4. A treatise on irregular shaped concrete test specimens vol.16, pp.1, 2015, https://doi.org/10.12989/cac.2015.16.1.179
  5. An investigation of the effectiveness of the utilization of biomass ashes as pozzolanic materials vol.68, 2014, https://doi.org/10.1016/j.conbuildmat.2014.06.071
  6. Evaluation of compressive strength development and carbonation depth of high volume slag-blended concrete vol.124, 2016, https://doi.org/10.1016/j.conbuildmat.2016.07.070
  7. Electrochemical Performance of Steel Embedded in CSA Concrete and Its Interfacial Microstructure vol.2020, pp.None, 2013, https://doi.org/10.1155/2020/4761854
  8. Model-Based Methods to Produce Greener Metakaolin Composite Concrete vol.11, pp.22, 2013, https://doi.org/10.3390/app112210704