DOI QR코드

DOI QR Code

Nonlinear finite element analysis of loading transferred from column to socket base

  • 투고 : 2012.04.23
  • 심사 : 2012.11.13
  • 발행 : 2013.05.01

초록

Since the beginning of the 90 s, depending on the growth of the industrial sector in Turkey, factory constructions have been increased. The cost of precast concrete buildings is lower than the steel ones for this reason the precast structural systems are used more. Precast concrete structural elements are mostly as strong as not to have damage in the earthquake but weakness of connections between elements causes unexpected damages of structure during earthquake. When looking at the previous researches, it can be seen that there is a lack of studies about socket type base connections although there were many experimental and analytical studies about the connections of precast structural elements. The aim of this study is to investigate the stress transfer mechanism between column and the socket base wall with finite element method. For the finite element analysis ANSYS software was used. A finite element model was created which is the simulation of experimental research executed by Canha et al. (2009) under vertical and horizontal forces. Results of experimental research and finite element analysis were compared to create a successful simulation of experimental program. After determining the acceptable parameters, models of socket bases were created. Model dimensions were chosen according to square section column sizes 400, 450, 500, 550 and 600 mm which were mostly used in industrial buildings. As a result of this study, stress distribution at center section of the socket base models were observed and it is found that stress distribution affects triangular at the half of socket bottom and top.

키워드

참고문헌

  1. ANSYS Inc. (2009), Element reference. ANSYS Inc., Canonsburg, 565, 1034, 1037, 1089.
  2. Alyavuz, B. and Anil, O. (2007), "Nonlinear finite element analysis of loading transferred from column to socket base", J. Fac. Eng. Arch. Gazi Univ., 22(3), 471-479.
  3. Architectural Institute of Japan (1999), "AIJ standard for structural calculation of reinforced concrete structures".
  4. Bayindirlik ve Iskan Bakanligi (2007), "Deprem bolgelerinde yapilacak binalar hakkinda yonetmelik", Resmi Gazete, 26454. 10-19 (In Turkish).
  5. Bulut, N., Anil, O. and Belgin, C.M. (2011), "Nonlinear finite element analysis of RC beams strengthened with CFRP strip against shear", Comput. Concrete, 8(6), 717-733. https://doi.org/10.12989/cac.2011.8.6.717
  6. Canha, R.M.F., El Debs, M.K., Jaguaribe Jr, K.B. and El Debs, A.L.H. (2009), "Behavior of socket base connections emphasizing pedestal walls", ACI Struct. J., 106(3), 268-278.
  7. Canha, R.M.F. (2004), "Estudo teorico-experimental da ligacao pilar-fundacao por meio de calice em estruturas de concreto pre-moldado", Phd Thesis, Escola de Engenharia de Sao Carlos da Universidade de Sao Paulo, Sao Carlos - SP, 143-159, 168-169, 173, 215.
  8. DIN 1045 (1988) "Reinforced concrete structures - design and construction", Beuth Verlag, Berlin.
  9. Dogan, A.B. and Anil, O. (2010), "Nonlinear finite element analysis of effective CFRP bonding length and strain distribution along concrete-CFRP interface", Comput. Concrete, 7(5), 437-453. https://doi.org/10.12989/cac.2010.7.5.437
  10. Drosopoulos, G.A., Stavroulakis, G.E. and Abdalla, K.M. (2012), "3D finite element analysis of end - plate steel joints", Steel Compos. Struct., 12(2), 93-115. https://doi.org/10.12989/scs.2012.12.2.093
  11. Fabbrocino, B., Pecce, M.R. and Di Sarno, L. (2005), "Traditional versus innovative composite base column connections", Adv. Steel Struct., 1, 793-798.
  12. Han, S.C., Nukulchai, W.K. and Lee, W.H. (2011), "A refined finite element for first-order plate and shell analysis", Struct. Eng. Mech., 40(2), 191-213. https://doi.org/10.12989/sem.2011.40.2.191
  13. Osanai, Y., Watanabe, F. and Okamoto, S. (1996), "Stress transfer mechanism of socket base connections with precast concrete columns", ACI Struct. J., 93(3), 266-276.
  14. Saboori, B and Khalili, S.M.R. (2012), "Free vibration analysis of tapered FRP transmission poles with flexible joint by finite element method", Struct. Eng. Mech., 42(3), 409-424. https://doi.org/10.12989/sem.2012.42.3.409
  15. Shi, G., Liu, Z., Ban, H.Y., Zhang, Y., Shi, Y.J. and Wang, Y.Q. (2012), "Tests and finite element analysis on the local buckling of 420 MPa steel equal angle columns under axial compression", Steel Compos. Struct., 12(1), 31-51. https://doi.org/10.12989/scs.2012.12.1.031
  16. Turk Standardlari Enstitusu (1997), "Yapi elemanlarinin boyutlandirilmasinda alinacak yuklerin hesap degerleri", TSE TS-498, Ankara, 7 (In Turkish).
  17. Turk Standardlari Enstitusu (2004), "Yapi elemanlari, tasiyici sistemler ve yapilar - Prefabrike betonarme ve ongerilmeli betondan - Hesap esaslari ile imalat ve montaj kurallari", TSE TS-9967, Ankara, 44-46, 101-102 (In Turkish).

피인용 문헌

  1. Structural analysis of a prestressed segmented girder using contact elements in ANSYS vol.20, pp.3, 2017, https://doi.org/10.12989/cac.2017.20.3.319
  2. Numerical simulation of the constructive steps of a cable-stayed bridge using ANSYS vol.69, pp.3, 2013, https://doi.org/10.12989/sem.2019.69.3.269