참고문헌
- D. Tabor, "Hardness of Metals," First Ed. Clarendon Press, New York (1951)
- W. C. Oliver and G. M. Pharr, "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments," J. Mater. Res, 7, pp. 1564 (1992) https://doi.org/10.1557/JMR.1992.1564
- S.-K. Kang, "Determining effective radius and frame compliance in spherical nanoindentation," Materials Science and Engineering A, 538, pp. 58-62 (2012) https://doi.org/10.1016/j.msea.2012.01.013
- S.-K. Kang, "Effective indenter radius and frame compliance in instrumented indentation testing using a spherical indenter," J. Mater. Res, 24, pp. 2965-2973 (2009) https://doi.org/10.1557/jmr.2009.0358
- Y.-T. Cheng, "Scaling, dimensional analysis, and indentation measurements," Mater. Sci. Eng. R. 44, pp. 91-149 (2004) https://doi.org/10.1016/j.mser.2004.05.001
- W. C. Oliver and G. M. Pharr, "Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology," J. Mater. Res. 19, pp. 3-20 (2004) https://doi.org/10.1557/jmr.2004.19.1.3
- J.-H. Ahn and D. Kwon, "Derivation of plastic stress-strain relationship from ball indentations: Examination of strain definition and pileup effect," J. Mater. Res. 16, pp. 3170-3178 (2001) https://doi.org/10.1557/JMR.2001.0437
- S. H. Kim, "Quantitative determination of contact depth during spherical indentation of metallic materials-A FEM study," Mater. Sci. Eng. A- Struct. 415, pp. 59-65 (2006) https://doi.org/10.1016/j.msea.2005.08.217
- J.-Y. Kim, "Determination of tensile properties by instrumented indentation technique: Representative stress and strain approach," Surf. Coat. Tech. 201, pp. 4278-4283 (2006) https://doi.org/10.1016/j.surfcoat.2006.08.054
- ISO/TR 29381, "Metallic materials-Measurement of properties by an instrumented indentation test-Indentation tensile properties," Korean Agency for Technology and Standards, Ministry of Knowledge Economy (2008)
- G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall, "A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements," Journal of the American Ceramic Society, 64(9), pp. 533-538 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10320.x
- J. J. Kruzic and R. O. Ritchie, "Determining the toughness of ceramics from vickers indentations using the crack-opening displacements: An experimental study," Journal of the American Ceramic Society, 86(8), pp 1433-1436 (2003) https://doi.org/10.1111/j.1151-2916.2003.tb03490.x
- J.-S. Lee, J.-I. Jang, B.-W. Lee, Y. Choi, S. G. Lee and D. Kwon, "An instrumented indentation technique for estimating fracture toughness of ductile materials: A critical indentation energy model based on continuum damage mechanics," Acta Materialia, 54(4), pp. 1101-1109 (2006) https://doi.org/10.1016/j.actamat.2005.10.033
- Y.-H Lee and D. Kwon, "Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique," Journal of Materials Research, Vol. 17, pp. 901-906 (2002) https://doi.org/10.1557/JMR.2002.0131
- S. Suresh and A. E. Giannakopoulos, "A new method for estimating residual stresses by instrumented sharp indentation," Acta Materialia, Vol. 46, pp. 5755-5767 (1998) https://doi.org/10.1016/S1359-6454(98)00226-2
- KS B 0950, "금속재료의 계장화 압입시험-압입 인장 물성 평가", 한국표준협회 (2002)
- KS B 0951, "철강 용접부의 계장화 압입시험- 잔류응력 측정", 한국표준협회 (2005)
- Case 2703, "Instrumented indentation testing as alternative hardness test for QW-290 temper bead welding," Section 9, ASME Boiler and Pressure Vessel Code (2011)