Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지

Nondestructive Evaluation for Safety Assessment on Power-Generating Structures Using Instrumented Indentation Technique

연속압입시험법을 활용한 발전설비 구조물의 비파괴검사

  • Published : 2013.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. D. Tabor, "Hardness of Metals," First Ed. Clarendon Press, New York (1951)
  2. W. C. Oliver and G. M. Pharr, "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments," J. Mater. Res, 7, pp. 1564 (1992) https://doi.org/10.1557/JMR.1992.1564
  3. S.-K. Kang, "Determining effective radius and frame compliance in spherical nanoindentation," Materials Science and Engineering A, 538, pp. 58-62 (2012) https://doi.org/10.1016/j.msea.2012.01.013
  4. S.-K. Kang, "Effective indenter radius and frame compliance in instrumented indentation testing using a spherical indenter," J. Mater. Res, 24, pp. 2965-2973 (2009) https://doi.org/10.1557/jmr.2009.0358
  5. Y.-T. Cheng, "Scaling, dimensional analysis, and indentation measurements," Mater. Sci. Eng. R. 44, pp. 91-149 (2004) https://doi.org/10.1016/j.mser.2004.05.001
  6. W. C. Oliver and G. M. Pharr, "Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology," J. Mater. Res. 19, pp. 3-20 (2004) https://doi.org/10.1557/jmr.2004.19.1.3
  7. J.-H. Ahn and D. Kwon, "Derivation of plastic stress-strain relationship from ball indentations: Examination of strain definition and pileup effect," J. Mater. Res. 16, pp. 3170-3178 (2001) https://doi.org/10.1557/JMR.2001.0437
  8. S. H. Kim, "Quantitative determination of contact depth during spherical indentation of metallic materials-A FEM study," Mater. Sci. Eng. A- Struct. 415, pp. 59-65 (2006) https://doi.org/10.1016/j.msea.2005.08.217
  9. J.-Y. Kim, "Determination of tensile properties by instrumented indentation technique: Representative stress and strain approach," Surf. Coat. Tech. 201, pp. 4278-4283 (2006) https://doi.org/10.1016/j.surfcoat.2006.08.054
  10. ISO/TR 29381, "Metallic materials-Measurement of properties by an instrumented indentation test-Indentation tensile properties," Korean Agency for Technology and Standards, Ministry of Knowledge Economy (2008)
  11. G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall, "A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements," Journal of the American Ceramic Society, 64(9), pp. 533-538 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10320.x
  12. J. J. Kruzic and R. O. Ritchie, "Determining the toughness of ceramics from vickers indentations using the crack-opening displacements: An experimental study," Journal of the American Ceramic Society, 86(8), pp 1433-1436 (2003) https://doi.org/10.1111/j.1151-2916.2003.tb03490.x
  13. J.-S. Lee, J.-I. Jang, B.-W. Lee, Y. Choi, S. G. Lee and D. Kwon, "An instrumented indentation technique for estimating fracture toughness of ductile materials: A critical indentation energy model based on continuum damage mechanics," Acta Materialia, 54(4), pp. 1101-1109 (2006) https://doi.org/10.1016/j.actamat.2005.10.033
  14. Y.-H Lee and D. Kwon, "Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique," Journal of Materials Research, Vol. 17, pp. 901-906 (2002) https://doi.org/10.1557/JMR.2002.0131
  15. S. Suresh and A. E. Giannakopoulos, "A new method for estimating residual stresses by instrumented sharp indentation," Acta Materialia, Vol. 46, pp. 5755-5767 (1998) https://doi.org/10.1016/S1359-6454(98)00226-2
  16. KS B 0950, "금속재료의 계장화 압입시험-압입 인장 물성 평가", 한국표준협회 (2002)
  17. KS B 0951, "철강 용접부의 계장화 압입시험- 잔류응력 측정", 한국표준협회 (2005)
  18. Case 2703, "Instrumented indentation testing as alternative hardness test for QW-290 temper bead welding," Section 9, ASME Boiler and Pressure Vessel Code (2011)