DOI QR코드

DOI QR Code

LNG 선박용 알루미늄 합금 소재의 정적 및 피로 강도 평가

Assessment for Static and Fatigue Strength of the Aluminum Alloy for LNG Ship

  • 윤용근 (충남대학교 기계설계공학과) ;
  • 김재훈 (충남대학교 기계설계공학과) ;
  • 김우중 (충남대학교 기계설계공학과) ;
  • 백경호 (충남대학교 나노소재공학과) ;
  • 박창현 (충남대학교 나노소재공학과)
  • Yoon, Yong Keun (Department of Mechanical Design Engineering, Chungnam National University) ;
  • Kim, Jae Hoon (Department of Mechanical Design Engineering, Chungnam National University) ;
  • Kim, Woo Joong (Department of Mechanical Design Engineering, Chungnam National University) ;
  • Baik, Kye Ho (Department of Nano Materials Engineering, Chungnam National University) ;
  • Park, Chang Hyun (Department of Nano Materials Engineering, Chungnam National University)
  • 투고 : 2012.07.27
  • 심사 : 2013.03.10
  • 발행 : 2013.04.30

초록

Liquefied Natural Gas is liquefied at the condition of atmosphere pressure and cryogenic temperature. LNG is exposed very long time under the cryogenic temperature and high pressure, and it is very important to retain the structural safety in this envelopment. Until now, the material which are composing the storage tank of LNG ship has experimented at room temperature, so it is not enough to apply for the design at the cryogenic temperature. The purposes of this study are investigated mechanical properties for aluminum alloy. To evaluate tensile and fatigue test for aluminum alloy, it was considering static and fatigue conditions at room and cryogenic temperature. S-N curves were designed at both temperature respectively. Also, P-S-N curve was performed statistical method by JSME-S002.

키워드

참고문헌

  1. S. J. Kim, S. K. Jang and M. S. Han, "Evaluation of Mechanical Characteristic of Al Alloy for Ship's Welded with Various Welding Techniques," Journal of the Korean Society of Marine Environment & Safety, Vol. 13, No. 3, pp. 223-228, 2007.
  2. J. H. Hwang and D. H. Park, "Fatigue Characteristic of Welded Al 5083 Alloy-0" Annual Meeting of KWJS, No. 2, pp. 205-209, 1992.
  3. ASTM E8, "Standard Test Methods for Tension Testing of Metallic Materials", ASTM International, pp. 1-24, 2004.
  4. ASTM E466, "Standard Practice for Con- ducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials", pp. 1-5, 2007.
  5. JSME S 002, "Standard Method of Statistical Fatigue Testing", Journal of the Japan Society of Mechanical Engineers, pp. 10-42, 1994.
  6. K. S. kim, S. H. Boo, C. Y. Park, Y. G. Cho and J. S. Lee, "An Experimental Study on the Tensile and Fatigue Strengths of SUS304L Lap Joint Weld at the Cryogenic Temperature", Int. J. of KCORE, Vol. 22, No. 3, pp. 96-102, 1992.
  7. H. J. Shim, I. H. Jeon and J. K. Kim, "Effective of Stress Ratio on the Fatigue Strength of Welding Part in the LNG Containment System", Fall Annual Meeting of KSME, pp. 201-206, 2009.
  8. J. M. Lee, J. H. Yoon, K. H. Kim and H. G. Kim, "Control of Inclusion in Aluminum Alloys", Journal of the Korean Foundrymen's Society, Vol. 23, No. 1, pp. 15-22, 2003.
  9. J. M. Kim, J. S. Park, H. Y. Kim, J. I. Cho and C. Y. Jung, "Effects of Mn, Cr and Sr Additions on the Microstructure and Tensile Properties of Al-7Si-0.4Mg-1Fe Casting Alloy", Journal of the Korean Foundrymen's Society, Vol. 29, No. 1, pp. 27-32, 2009.
  10. J. An, K. H. Moon and K. H. Lee, "A Study on the Measurement of the Concentration and the Size Distribution of Inclusions in the Molten Aluminum", Journal of the Korean Foundrymen's Society, Vol. 14, No. 1, pp. 62-74, 1994.