DOI QR코드

DOI QR Code

Enhanced damage index method using torsion modes of structures

  • Im, Seok Been (ENG center, Samsung C&T) ;
  • Cloudt, Harding C. (Zachry Department of Civil Engineering, Texas A&M University) ;
  • Fogle, Jeffrey A. (Zachry Department of Civil Engineering, Texas A&M University) ;
  • Hurlebaus, Stefan (Zachry Department of Civil Engineering, Texas A&M University)
  • 투고 : 2012.10.16
  • 심사 : 2013.06.14
  • 발행 : 2013.09.25

초록

A growing need has developed in the United States to obtain more specific knowledge on the structural integrity of infrastructure due to aging service lives, heavier and more frequent loading conditions, and durability issues. This need has spurred extensive research in the area of structural health monitoring over the past few decades. Several structural health monitoring techniques have been developed that are capable of locating damage in structures using modal strain energy of mode shapes. Typically in the past, bending strain energy has been used in these methods since it is a dominant vibrational mode in many structures and is easily measured. Additionally, there may be cases, such as pipes, shafts, or certain bridges, where structures exhibit significant torsional behavior as well. In this research, torsional strain energy is used to locate damage. The damage index method is used on two numerical models; a cantilevered steel pipe and a simply-supported steel plate girder bridge. Torsion damage indices are compared to bending damage indices to assess their effectiveness at locating damage. The torsion strain energy method is capable of accurately locating damage and providing additional valuable information to both of the structures' behaviors.

키워드

참고문헌

  1. Cawley, P. and Adams, R.D. (1979), "The location of defects in structures from measurement of natural frequencies". J. Strain Anal. Eng., 14(2), 49-57. https://doi.org/10.1243/03093247V142049
  2. Chance, J., Tomlinson, G.R. and Worden, K. (1994), "A simplified approach to the numerical and experimental modeling of the dynamics of a cracked beam", Proceedings of the SPIE 12th International Modal Analysis Conference.
  3. Choi, F., Li, J., Samali, B. and Crews, K. (2008), "Application of the modified damage index method to timber beams", Eng. Struct., 30, 1124-1145 https://doi.org/10.1016/j.engstruct.2007.07.014
  4. Choi, S., Park, S., Park, N.H. and Stubbs, N. "Improved fault quantification for a plate structure", J. Sound Vib., 297, 865-879.
  5. Doebling, S.W. and Farrar, C.R. (1997), "Using statistical analysis to enhance modal-based damage identification", Proceedings of the DAMAS '97 Structural Damage Assessment Using Advanced Signal Processing, University of Sheffield, UK.
  6. Duffey, T.A., Doebling, S.W., Farrar, C.R., Baker, W.E. and Rhee, W.H. (2001), "Vibration-based damage identification in structures exhibiting axial and torsional response", J. Vib. Acoust., 123, 84-91. https://doi.org/10.1115/1.1320445
  7. Ettouney, M., Daddazio, R., Hapij, A. and Aly, A. (1998), "Health monitoring of complex structures", Proceedings of the SPIE Smart Structures and Materials 1998: Industrial and Commercial Applications of Smart Structures Technologies.
  8. Farrar, C.R. and Jauregui, D. (2001) Damage detection algorithms applied to experimental and numerical modal data from the 1-40 bridge, LA-13074-MS, Report of Los Alamos National Laboratory.
  9. Farrar, C.R., Baker, W.E., Bell, T.M., Cone, K.M., Darling, T.W., Duffey, T.A., Eklund, A. and Migliori, A. (1994), Dynamic characterization and damage detection in the I-40 bridge over the Rio Grande, Los Alamos National Laboratory Report LA-12767-MS, Los Alamos National Laboratory, Los Alamos.
  10. Ho, Y.K. and Ewins, D.J. (1999), "Numerical evaluation of the damage index", Proceedings of the 2nd International Workshop on Structural Health Monitoring, Stanford University, Palo Alto, California.
  11. Huang, Q., Gardoni, P. and Hurlebaus, S. (2009), "Probabilistic capacity models and fragility estimates for reinforced concrete columns incorporating NDT data", J. Eng. Mech. - ASCE, 135(12), 1384-1392. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:12(1384)
  12. Kim, B., Stubbs, N. and Park, T. (2005), "A new method to extract modal parameters using output-only responses", J. Sound Vib., 282, 215-230. https://doi.org/10.1016/j.jsv.2004.02.026
  13. Kim, B., Lee, J. and Lee, D.H. (2010), "Extracting modal parameters of high-speed railway bridge using the TDD technique", Mech. Syst. Signal Pr., 3, 707-720.
  14. Kim, J.T., Park, J.H. and Lee, B.J. (2007). "Vibration-based damage monitoring in model plategirder bridges under uncertain temperature conditions", Eng. Struct., 29(7), 1354-1365 https://doi.org/10.1016/j.engstruct.2006.07.024
  15. Kim, J.T. and Stubbs, N. (2002), "Improved damage identification method based on modal information", J. Sound Vib., 252, 223-238. https://doi.org/10.1006/jsvi.2001.3749
  16. Kim, J.T., Ryu, Y.S., Cho, H.M. and Stubbs, N. (2003), "Damage identification in beam-type structures: frequency-based method vs. mode-shape-based method", Eng. Struct., 25, 57-67. https://doi.org/10.1016/S0141-0296(02)00118-9
  17. Lin, C. (1998), "Unity check method for structural damage detection", J. Spacecraft Rockets, 35(4), 577-579. https://doi.org/10.2514/2.3371
  18. Mazurek, D.F. and DeWolf, J.T. (1990), "Experimental study of bridge monitoring technique", J. Struct. Eng. - ASCE, 116(9), 2532-2549. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:9(2532)
  19. Mizuno, Y., Monroig, E. and Fujino, Y. (2008), "Wavelet decomposition-based approach for fast damage detection of civil structures", J. Infrastruct. Syst., 14(1), 27-32. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(27)
  20. Natke, H.G. and Cempel, C. (1997), "Model-aided diagnosis based on symptoms", Proceedings of the DAMAS '97, Structural Damage Assessment Using Advanced Signal Processing Procedures, University of Sheffield, UK, 363-375.
  21. Pandey, A.K. and Biswas, M. (1994), "Damage detection in structures using changes in flexibility", J. Sound Vib., 169 (1), 3-17. https://doi.org/10.1006/jsvi.1994.1002
  22. Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound Vib., 145(2), 321-332. https://doi.org/10.1016/0022-460X(91)90595-B
  23. Park, S., Stubbs, N., Bolton, R. and Choi, S. (2001), "Field verification of the damage index method in a concrete box-girder bridge via visual inspection", Comput. Aided Civil. Infrastruct. Eng., 16, 58-70. https://doi.org/10.1111/0885-9507.00213
  24. Rytter, A. and Kirkegaard, P. (1997), "Vibration based inspection using neural networks", Proceedings of the DAMAS '97, Structural Damage Assessment Using Advanced Signal Processing, University of Sheffield, UK, 97-108.
  25. Samali, B., Li, J., Choi, F.C. and Crews., K. (2010). "Application of the damage index method for plate-like structures to timber bridges", Struct. Health Monit., 17(8), 849-871. https://doi.org/10.1002/stc.347
  26. Stanbridge, A.B., Khan, A.Z. and Ewins, D.J. (1997), Fault quantification in vibrating structures using a scanning laser doppler vibrometer, Structural Health Monitoring, Current Status and Perspectives, Stanford University, Palo Alto, California.
  27. Stubbs, N. and Kim, J.T. (1996), "Damage localization in structures without baseline modal parameters", AIAA J. 34(8), 1644-1649. https://doi.org/10.2514/3.13284
  28. Toksoy, T. and Aktan, A.E. (1994), "Bridge-condition assessment by modal flexibility", Exp. Mech., 34, 271-278. https://doi.org/10.1007/BF02319765
  29. Topole, K. (1997), "Damage evaluation via flexibility formulation", Proceedings of the SPIE 3043Smart Systems for Bridges, Structures, and Highways, May.
  30. You, T. (2009), Iterative damage index method for structural health monitoring, Master Thesis, Texas A&M University, College Station, Texas, USA.
  31. Zhang, L., Wang, T. and Tamura, Y. (2010), "A frequency-spatial domain decomposition (FSDD) method for operational modal analysis", Mech. Syst. Signal Pr., 24(5), 1127-1239.

피인용 문헌

  1. Damage assessment by stiffness identification for a full-scale three-story steel moment resisting frame building subjected to a sequence of earthquake excitations vol.15, pp.12, 2017, https://doi.org/10.1007/s10518-017-0190-y
  2. Dynamic torsional response measurement model using motion capture system vol.19, pp.6, 2017, https://doi.org/10.12989/sss.2017.19.6.679