DOI QR코드

DOI QR Code

Rapid full-scale expansion joint monitoring using wireless hybrid sensor

  • Jang, Shinae (Department of Civil and Environmental Engineering, University of Connecticut) ;
  • Dahal, Sushil (Department of Civil and Environmental Engineering, University of Connecticut) ;
  • Li, Jingcheng (Department of Civil and Environmental Engineering, University of Connecticut)
  • 투고 : 2012.10.08
  • 심사 : 2013.04.18
  • 발행 : 2013.09.25

초록

Condition assessment and monitoring of bridges is critical for safe passenger travel, public transportation, and efficient freight. In monitoring, displacement measurement capability is important to keep track of performance of bridge, in part or as whole. One of the most important parts of a bridge is the expansion joint, which accommodates continuous cyclic thermal expansion of the whole bridge. Though expansion joint is critical for bridge performance, its inspection and monitoring has not been considered significantly because the monitoring requires long-term data using cost intensive equipment. Recently, a wireless smart sensor network (WSSN) has drawn significant attention for transportation infrastructure monitoring because of its merits in low cost, easy installation, and versatile on-board computation capability. In this paper, a rapid wireless displacement monitoring system, wireless hybrid sensor (WHS), has been developed to monitor displacement of expansion joints of bridges. The WHS has been calibrated for both static and dynamic displacement measurement in laboratory environment, and deployed on an in-service highway bridge to demonstrate rapid expansion joint monitoring. The test-bed is a continuous steel girder bridge, the Founders Bridge, in East Hartford, Connecticut. Using the WHS system, the static and dynamic displacement of the expansion joint has been measured. The short-term displacement trend in terms of temperature is calculated. With the WHS system, approximately 6% of the time has been spent for installation, and 94% of time for the measurement showing strong potential of the developed system for rapid displacement monitoring.

키워드

참고문헌

  1. American Society of Civil Engineers, (2009), Report Card for America's Infrastructure Bridge Preservation guide, Maintaining a state of good repair using cost effective investment strategies. FHWA-HIF-11042.
  2. Charron, G. (2006), Montreal bridge collapse: a case of criminal neglect, World Socialist Web Site (http://www.wsws.org/articles/2006/oct2006/mont-o06.shtml)
  3. ConnDOT (State of Connecticut Department of Transportation). (2005), Traffic volumes state maintained highway network (Traffic log), http://www.ct.gov/dot/LIB/dot/Documents/dpolicy/traflog/traflog.pdf, downloaded May 1, 2012.
  4. Contreras, G.K., Fitch, J., Karamavros, J. and Bansal, R. (2011), The High-Fidelity multi-scale power efficient sensor board, ECE Senior Design Project, University of Connecticut, Storrs CT http://www.ee.uconn.edu/SeniorDesign/projects/ecesd137/SeniorDesignFinalReport.pdf
  5. Doebling, S.W., Farrar, C.R., Prime, M.B., and Shevitz, D.W. (1996), Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, Los Alamos National Laboratory Report, LA-13070-MS.
  6. Dornsife, R.J (2000), Expansion joints:bridge engineering handbook, CRC Press, NY.
  7. Graybeal, B.A., Walther, R.A. and Washer G.A. (2007), "Ultrasonic inspection of bridge hanger pins", Transport. Res. B., 1697(2000), 19-23.
  8. Guerreiro, H., Rebelo, R.C. and Gomes, L. (2011). "Bridge expansion joints monitoring system", Proceedings of the IEEE International Conference on Intelligent Engineering Systems - INES.
  9. Ho, D.D., Lee, P.Y., Nguyen, K.D., Hong, D.S., Lee, S.Y., Kim, J.T., Shin, S.W., Yun, C.B. and Shinozuka, M. (2012), "Solar-power multi-scale sensor node on Imote2 platform for hybrid SHM in cable-stayed bridge", Smart Struct. Syst., 9 (2), 145-164. https://doi.org/10.12989/sss.2012.9.2.145
  10. Jang, S., Dahal, S., Contreras, G.K., Fitch, J., Karamavros, J. and Bansal, R. (2012), "Hybrid structural health monitoring for in-service highway bridges using wireless multi-scale sensors", Proceedings of the SPIE, doi:10.1117/12.920866.
  11. Jang, S., Jo, H., Cho, S., Mechitov, K., Rice, J.A., Sim, S.H., Jung, H.J., Yun, C.B., Spencer, Jr., B.F. and Agha, G. (2010), "Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation", Smart Struct. Syst., 6(5-6), 439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  12. Jang. S., Spencer, Jr., B. F., Rice. J.A. and Wang, Z. (2011), "Structural monitoring of a historic truss bridge using a wireless sensor network", Adv. Struct. Eng., 14(1), 93-101. https://doi.org/10.1260/1369-4332.14.1.93
  13. Jo, H., Sim, S.H., Mechitov., K., Kim, R., Li, J., Moinzadeh, P., Spencer, Jr., B.F., Park, J.W., Cho, S., Jung, H.J., Yun, C.B., Rice, J. and Nagayama, T. (2011), "Hybrid wireless smart sensor network for full-scale structural health monitoring of a cable-stayed bridge", Proceedings of the SPIE, doi:10.1117/12.880513.
  14. Kim S., Pakzad, S., Culler, D., Demmel, D., Fenves, G., Glaser, S. and Turon, M. (2007), "Health monitoring of civil infrastructures using wireless sensor networks", Proceedings of the 6th Int. Conf. on Information Processing in Sensor Networks.
  15. Lee, J.J., Fukuda, Y., Shinozuka, M., Cho, S. and Yun, C.B. (2007), "Development and application of a vision-based displacement measurement system for structural health monitoring of civil structure", Smart Struct. Syst., 3(3), 373-384. https://doi.org/10.12989/sss.2007.3.3.373
  16. Lynch, J.P., Wang, Y., Loh, K.J., Yi, J.H. and Yun, C.B. (2006), "Performance monitoring of the Geumdang Bridge using a dense network of high-resolution wireless sensors", Smart Mater. Struct., 15(6), 1561-1575. https://doi.org/10.1088/0964-1726/15/6/008
  17. Nagayama, T. and Spencer Jr., B.F. (2007), Structural health monitoring using smart sensors, NSEL Report Series, No. 1, University of Illinois at Urbana-Champaign http://hdl.handle.net/2142/3521.
  18. Nakamura, S. (2000), "GPS measurement of wind-induced suspension bridge girder displacements", J. Struct.Eng. - ASCE, 126(12), 1413-1419. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:12(1413)
  19. Nassif, H. H., Gindy, M. and Davis, J. (2005), "Comparison of laser doppler vibrometer with contact sensors for monitoring bridge deflection and vibration", NDT&E. Int., 38(3), 213-218. https://doi.org/10.1016/j.ndteint.2004.06.012
  20. Ni, Y.Q., Hua, X.G., Wong, K.Y., Ko, J.M. and ACSE, F. (2007), "Assessment of bridge expansion joints using long-term displacement and temperature measurement", J. Perform. Constr. Fac., 2(21), 143-151.
  21. Pakzad, S. (2008), Statistical approach to structural monitoring using scalable wireless sensor networks, Ph.D. Dissertation, University of California, Berkeley.
  22. Rice, J.A. and Spencer Jr., B.F. (2009), Flexible smart sensor framework for autonomous full-scale structural health monitoring, NSEL Report No. 18, University of Illinois at Urbana-Champaign. http://hdl.handle.net/2142/13635
  23. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003), A review of structural health monitoring literature: 1996-2001, Los Alamos National Laboratory Report, LA-13976-MS.
  24. State of Connecticut Department of Transportation (2006), Traffic Volumes State Maintained Highway Network (Traffic log), www.ct.gov/dot/LIB/dot/Documents/dpolicy/traflog/traflog.pdf, accessed on Aug 1, 2012.
  25. Wahbeh, A.M., Caffrey, J.P. and Masri, S.F. (2003), "A vision-based approach for the direct measurement of displacements in vibrating systems", Smart Mater. Struct. 12(5), 785-794. https://doi.org/10.1088/0964-1726/12/5/016

피인용 문헌

  1. Decentralized System Identification Using Stochastic Subspace Identification for Wireless Sensor Networks vol.15, pp.12, 2015, https://doi.org/10.3390/s150408131