Journal of Advanced Marine Engineering and Technology

  • 제37권4호
  • /
  • Pages.368-377
  • /
  • 2013
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

우레아염 퇴적 방지를 위한 믹서 위치 및 하우징 형상에 따른 벽면 유동특성에 관한 연구

Wall flow characteristics with static mixer position and housing geometry for preventing urea-salt deposition

  • 투고 : 2013.03.11
  • 심사 : 2013.05.11
  • 발행 : 2013.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

대형디젤기관 배기가스 저감용 Urea-SCR 시스템은 높은 NOx 저감율을 보이는 반면, 높은 관통도를 갖는 요소수가 벽면 충돌 후 증발하지 못하고 벽면에 머물게 되어 우레아염을 형성한다. 우레아염 생성 방지를 위한 방안으로 벽면유동 형성을 촉진하기위한 믹서-하우징 조립체의 형상 최적화와 관련된 실험적 연구가 수행되었다. 하우징 경사각 변화 및 믹서 설치위치에 따라 벽면유동의 증가 가능성이 hot-wire 시스템을 이용하여 조사되었다. 벽면 유동은 하우징 경사각 및 믹서 설치 위치에 큰 영향을 받으며, 하우징 경사각이 있고 믹서가 하우징 후단에 설치될 때 벽면유동이 향상되는 것을 알 수 있었다.

The Urea-SCR system commercialized shows a remarkable performance to reduce NOx emission in heavy duty diesel engines. However, Urea-water solution injected upstream a mixer, which is set up inside a exhaust pipe to promote exhaust gas-atomized droplet mixing, bumps up against the wall of a exhaust pipe as the droplets flow downstream through the exhaust gas. The urea deposited on the wall of the exhaust pipe is changed into the Urea-salt, resulting in the decreased life-time of the SCR catalysts. Therefore, the development of the urea deposition avoidance technologies is being treated as an important issue of the Urea-SCR systems. An experimental study was carried out to investigate the effects of the wall flow characteristics around the mixer-housing assembly with the variation of the mixer housing surrounding and supporting the mixer, which is designed to increase the wall flow and then to reduce droplet deposition. The flow characteristics was investigated by using a hot-wire anemometry for 2-D simplified duct model, and the housing tilt angles and the position of the mixer were changed : angle of $0^{\circ}$, $1^{\circ}$, $2^{\circ}$, $3^{\circ}$, and mixer positions of 0L, 0.5L, 1L. The results showed that the wall flow onto the exhaust pipe was improved with changing the tilt angle of the mixer housing, and the wall flow improved more when the position of the mixer was on 1L.

키워드

참고문헌

  1. T. V. Johnson, "Diesel Emission Control in Review," Society of Automotive Engineers 2007-01-0233, 2007.
  2. H. P. Heering, C. H. Onder, M. Elsener, and C. M. Schaer, "Control of a urea SCR catalytic converter system for a mobile heavy duty diesel engine," Society of Automotive Engineers 2003-01-0776, 2003.
  3. Z. Huang, Z. Zhu, Z. Liu, and Q. Liu, "Formation and reaction of ammonium sulfate salts on V2O5/AC catalyst during selective catalytic reduction of nitric oxide by ammonia at low temperatures," Journal of Catalysis, vol. 214, pp. 213-219, 2003. https://doi.org/10.1016/S0021-9517(02)00157-4
  4. H. S. Kim, Y. G. Jeong, M. H. Song, S. W. Lee, H. D. Park, and J. W. Hwang, "Influential factors for NOx reduction performance of Urea-SCR system for an in-use medium duty diesel engine," Transactions of Korean Society of Automotive Engineers, vol. 17, no. 1, pp. 154-161, 2009.
  5. J. W. Seo, K. I. Lee, J. T. Oh, Y. H. Choi, J. H. Lee, and J. I. Park, "The study on the effects of mixer configurations on fluid mixing characteristics in SCR systems," Transactions of Korean Society of Automotive Engineers, vol. 16, no. 6, pp. 192-199, 2008.
  6. S. H. Ryu, J. Y. Kim, B. S. Min, and J. S. Ha, "A research on the characteristics of spray-induced mixing and thermal decomposition of urea solution in SCR system," Journal of the Korean Society of Marine Engineers, vol. 28, no. 5, pp. 818-826, 2004.
  7. J. M. Oh, W. Cha, K. Kim, J. Lee, and K. Lee, "A study on the characteristic and droplet uniformity of spray injection to exhaust gas flow from urea solution injector," Transactions of Korean Society of Automotive Engineers, vol. 19, no. 3, pp. 83-89, 2011.
  8. Y. S. Cho, S. W. Lee, I. K. Jang, Y. B. Yoon, C. S. Song, Y. J. Park, and H. O. Kim, "An experimental study on optimization of NH3 injection with Various Exhaust Gas Conditions on Selective Catalytic Reduction(SCR) System," Transactions of Korean Society of Automotive Engineers, vol. 17, no. 6, pp. 74-80, 2009.
  9. S. J. Jeong, S. J. Lee, W. S. Kim, and C. B. Lee, "Numerical study on the injector shape and location of urea SCR system of heavy-duty diesel engine for preventing $NH_3$ slip," Transactions of Korean Society of Automotive Engineers, vol. 14, no. 1, pp. 68-78, 2006.
  10. J. G. Nam and J. S. Choi, "Dynamic characteristics of a urea SCR system for NOx reduction in diesel engine," Journal of the Korean Society of Marine Engineering, vol. 31, no. 3, pp. 235-242, 2007. https://doi.org/10.5916/jkosme.2007.31.3.235
  11. J. S. Choi, K. H. Cho, J. H. Lee, J. W. Lee, J. G. Kim, H. S. Yang, J. H. Ko, K. Y. park, and S. H. Jang, "Investigation of NOx reduction ratio on SCR system for a marine diesel engine," Journal of the Korean Society of Marine Engineering, vol. 27, no. 6, pp. 832-838, 2003.
  12. M. Koebel, M. Elsener, and M. Kleemann, "Urea-SCR: A promising technique to reduce NOx emissions from automotive diesel engines," Catalysis Today, vol. 59, pp. 335-345, 2000. https://doi.org/10.1016/S0920-5861(00)00299-6
  13. S. Grout, J. Blaisot, K. Pajot, and G. Osbat, "Experimental investigation on the injection of An urea-water solution in hot air stream for the SCR application: evaporation and spray/wall interaction," Fuel, 2012. Available: http://dx.doi.org/10.1016/j.fuel.2012.09.022
  14. H. Liu, T. Guo, Y. Yang, and G. Lu, "Optimization and numerical simulation of the flow characteristics in SCR system," Energy Procedia, vol. 17, pp. 801-812, 2012. https://doi.org/10.1016/j.egypro.2012.02.173
  15. T. K. Kim, Y. M. Sung, S. H. Han, S. J. Ha, G. M. Choi, and D. J. Kim, "Effect of mixer structure on turbulence and mixing with urea-water solution in marine SCR system," Journal of the Korean Society of Marine Engineering, vol. 36, no. 6, pp. 814-822, 2012. https://doi.org/10.5916/jkosme.2012.36.6.814
  16. M. W. Bae, Syaiful, and Y. Mochimaru, "A study on numerical simulation of gaseous flow in SCR catalytic filter of diesel exhaust gas after treatment device," Journal of the Korean Society of Marine Engineering, vol. 34, no. 3, pp. 360-368, 2010. https://doi.org/10.5916/jkosme.2010.34.3.360