대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제15권3호
  • /
  • Pages.29-35
  • /
  • 2013
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지
DOI QR코드

DOI QR Code

조적공사 인방보용 강재트러스 구조물에 관한 실험적 연구 - 아파트 기준층 문틀 상단 인방재를 중심으로 -

Experimental Study on Steel Truss Structure for Safety Lintel in Masonry Construction -Focusing on Door Frame Top Lintel at Typical Floor Apartment-

  • 김영춘 (명지대학교 산업경영공학과) ;
  • 유현동 (명지대학교 산업경영공학과) ;
  • 최우종 (명지대학교 산업경영공학과) ;
  • 정상무 (명지대학교 산업경영공학과) ;
  • 강경식 (명지대학교 산업경영공학과)
  • Kim, Young-Chun (Department of Industrial Engineering, Graduate School, University of Myongji) ;
  • Yoo, Hyun-Dong (Department of Industrial Engineering, Graduate School, University of Myongji) ;
  • Choi, Woo-Jong (Department of Industrial Engineering, Graduate School, University of Myongji) ;
  • Jeong, Sang-Moo (Department of Industrial Engineering, Graduate School, University of Myongji) ;
  • Kang, Myung-Sik (Department of Industrial Management Engineering, Myongji University)
  • 투고 : 2013.07.11
  • 심사 : 2013.09.10
  • 발행 : 2013.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The research is to verify by experiments whether the steel truss structure is able to withstand the load of cement bricks of upper part of a door for the safe use of lightweight steel truss structure instead of concrete lintel which is to be installed at upper part of door frame in building cement bricks for apartment construction. The steel truss is designed in order not to disturb bricks-building and the shape of structure was verified by bending test. According to experiments result, camber was applied to steel structure that enabled construction work to be improved and was proved effective for the prevention of accidents by cement bricks-building load test.

키워드

참고문헌

  1. Architectural Institute of Korea, Architectural Standard Specification, 2006.
  2. Kwang-Man Kim, Dong-Myung Hyun, Young- Chun Kim, Strong and Beautiful Construction Story, Baro ConKey Co., Ltd. 1999.
  3. KS F 2273, Performance Test of Assembly Panel, 2009.
  4. OSHRI. 2009 Industrial Safety & Health Trends Survey, 2010.
  5. JSW, "Research on Strength Characteristics by Condition of Cement Matrix Extrusion Material", Graduate School Master's Degree Thesis, Konkuk University, 1997.
  6. KS F 4735, Extrusion Molding Concrete Panel, 2011.
  7. Architectural Institute of Korea, Building Structure Standards and Commentary, 2009.
  8. MOLIT, Standard Specification for Temporary Work Project, 2006.