DOI QR코드

DOI QR Code

국내외 비정형 건축물 외피시스템 사례 분석을 통한 설계 및 시공시 고려사항 도출

Deduction of Considerations During Design and Construction by Analysing Domestic and Abroad Case Analysis of Freeform Building Envelope

  • 류한국 (국립창원대학교 건축공학과)
  • 투고 : 2013.03.08
  • 심사 : 2013.05.08
  • 발행 : 2013.07.31

초록

최근 건설 산업의 디지털화로 인하여 건축 디자인이 정형에서 자유로운 비정형 형태로 변화하고 있다. 특히, 국내에서는 최근 비정형이 디자인 경향으로 도입되어 현상설계, 턴키 등에서 설계 당선을 위한 디자인 요소로 많이 적용되고 있다. 그러나 기존의 정형 건축물의 외벽공법을 비정형 건축물의 외피에 그대로 적용함으로써 누수 및 크랙 등 다양한 하자가 발생하고 있다. 이러한 문제점을 개선하고 공사기간과 공사비를 최소화할 수 있는 비정형 건축물의 설계와 시공이 새로운 기술로 도입되고 있다. 이에 본 연구는 비정형 외피시스템 구현을 위한 공법을 국내외 비정형 건축물의 외피시스템 사례 분석을 통하여 실증적으로 시사점을 도출하고 비정형 건축물 외피시스템의 설계와 시공시 고려해야 할 사항을 다음과 같이 제시하였다. 첫째, 시공성을 고려한 비정형 형태의 설계가 되도록 하여야 한다. 둘째, 2방향 곡면을 정확히 구현할 수 있는 단위 패널 생산 기술의 개발이 필요하다. 셋째, 비정형 콘크리트 외피용 노출 콘크리트 거푸집을 개발하여야 한다. 넷째, 외피 시스템을 부위별로 구분하여 우수처리와 방수를 위한 재료와 공법 특성과 유지관리 방안을 고려하여야 한다.

Recently, architectural design has been changing from formal design to freeform design due to the digitalization of construction industry. Especially, the formal design has been accepted as a design trend recently and applied many times as a design concept in the architectural design competitions such as turn-key. However, various deflects such as water leak and cracks have been occurred because the traditional construction methods had been applied without any revision or adaptation of the formal construction method for the freeform building construction. Design and construction of freeform building has been developed as an new method in order to solve the problems and minimize the construction duration and cost for the freeform building. Therefore this research deduced the positive implications for developing freefrom envelope by analyzing the domestic and abroad cases and proposed the considerations during design and construction of the freeform envelope as follows. First, the freeform design should consider the constructability for the freeform envelope. Second, manufacturing technology for the two-way curvature of the unit panel should be developed. Third, exposed concrete form method should be developed for the freeform envelope of concrete. Forth, material characteristics, construction method and facility management should be considered in order to manage precipitation and keep water-proof according to the classification of the freeform envelope area.

키워드

참고문헌

  1. 권순호.심현우.장현승.옥종호 (2010). "비정형 건축물 외장재의 패널 최적화를 위한 프로세스 개발에 관한 연구". 정기학술발표대회 논문집, 제10권, 한국건설관리학회, pp. 373-374
  2. 박정근.이명식 (2008). "비정형 건축에 있어서 BIM(Building Information Modeling)의 적용방안에 관한 연구". 대한건축학회 학술발표대회 논문집, 제28권 제1호, pp. 209-212
  3. 배경진.이상헌.전한종 (2009). "비정형 건축물 구현을 위한 디지털 디자인 프로세스에 관한 연구". 대한건축학회 학술발표대회 논문집, 제29권 제1호), pp. 221-224
  4. 안지연.최정민.권순호.옥종호 (2009). "비정형 프로젝트 공사관리를 위한 증강현실 기반의 디지털 콘텐츠 개발". 정기학술발표대회 논문집, 제9권, 한국건설관리학회, p. 1054
  5. 윤수원.박광호.최철호.진상윤 (2009). "국내 대형 시공현장의 BIM 도입 사례 및 시사점: 디큐브 시티 프로젝트". 대한건축학회, pp. 52-55
  6. 이강 (2008). "비정형 건축의 시공 문제점들". 대한건축학회, pp. 63-65
  7. 최정민.권순호.고기웅.김대옥.옥종호 (2009). "3D 엔지니어링 설계 도구를 활용한 비정형 건축물의 외장제작 도면화 개발에 관한 연구". 한국산학기술학회 춘계 학술발표논문집, pp. 565-570
  8. 황재식 (2008). "[특집] 인천 국제공항 교통센터를 중심으로 한 비정형 건축물의 설계에 관하여". 대한건축학회지 제52권 제4호, pp. 18-23
  9. Buswell, R.A., Thorpe, A, Soar, R.C., Gibb, A.GF (2008). "Design, data and process issues for mega-scale rapid manufacturing machines used for construction." Automation in Construction. 17, pp. 923-929 https://doi.org/10.1016/j.autcon.2008.03.001
  10. Eigensatz, M., Kilian, M., Schiftner, A., Mitra, N., Pottmann, H., Pauly, M. (2010). "Paneling Architectural Freeform Surfaces. Proceedings of Association for Computing Machinery Transactions on Graphics." 29(4), New York (USA): Association for Computing Machinery; 2010. Article 45.
  11. Guzik, A. (2009). "Digital fabrication inspired design: Influence of fabrication parameters on a design process." [master's thesis]. [London]:University College London, p. 71
  12. Kloft, H. (2009). "Fabricating architecture(selected readings in digital design and manufacturing)." New York(USA): Rinceton Architectural Press, p. 111
  13. Ryu, H.G., Kim, S.J. (2012). "Case study of concrete surface design and construction method for freeform building based on BIM." Journal of the Korean Institute of Building Construction, 12(3), pp. 347-357 https://doi.org/10.5345/JKIBC.2012.12.3.347
  14. Schodek, D., Bechthold, M., Griggs, K., Kao, K.M. (2005). "Steinberg M. Digital design and manufacturing CAD/CAM application in architecture and design." Hoboken: John Wiley & Sons, Inc., p. 13