DOI QR코드

DOI QR Code

Influence of steel-concrete interaction in dissipative zones of frames: II - Numerical study

  • Danku, Gelu (Department of Steel Structures and Structural Mechanics, Faculty of Civil Engineering - The "Politehnica" University) ;
  • Dubina, Dan (Department of Steel Structures and Structural Mechanics, Faculty of Civil Engineering - The "Politehnica" University) ;
  • Ciutina, Adrian (Department of Steel Structures and Structural Mechanics, Faculty of Civil Engineering - The "Politehnica" University)
  • 투고 : 2012.10.19
  • 심사 : 2013.07.17
  • 발행 : 2013.09.25

초록

In the case of seismic-resistant composite dual moment resisting and eccentrically braced frames, the current design practice is to avoid the disposition of shear connectors in the expected plastic zones, and consequently to consider a symmetric moment or shear plastic hinges, which occur only in the steel beam or link. Even without connectors, the real behavior of the hinge may be different from the symmetric assumption since the reinforced concrete slab is connected to the steel element close to the hinge locations, and also due to contact friction between the concrete slab and the steel element. At a larger level, the structural response in the case of important seismic motions depends directly on the elasto-plastic behavior of elements and hinges. The numerical investigation presented in this study summarizes the results of elasto-plastic analyses of several steel frames, considering the interaction of the steel beam with the concrete slab. Several parameters, such as the inter-story drift, plastic rotation requirements and behavior factors q were monitored. In order to obtain accurate results, adequate models of plastic hinges are proposed for both the composite short link and composite reduced beam sections.

키워드

참고문헌

  1. Bosco, M. and Rossi, P.P. (2009), "Seismic behaviour of eccentrically braced frames", Eng. Struct., 31(3), 664-674. https://doi.org/10.1016/j.engstruct.2008.11.002
  2. Chao, S-H. and Goel, S.C. (2006), "Performance-based seismic design of eccentrically braced frames using target drift and yield mechanism", AISC Eng. J., 3rd Quarter, 173-200.
  3. CSI - Computers and Structures Incorporation (2012), SAP 2000 Overview, Online at; http://www.csiberkley.com/sap2000
  4. Danku, G. (2011) "Study of the development of plastic hinges in composite steel-concrete structural members subjected to shear and/or bending", Ph.D. Thesis, Politehnica University of Timisoara.
  5. Degee, H., Lebrun, N. and Plumier, A. (2010), "Considerations on the design, analysis and performances of eccentrically braced composite frames under seismic action", Proceedings of SDSS 2010 Conference - Stability and Ductility of Steel Structures, 337-344.
  6. Elghazouli, A.Y., Castro, J.M. and Izzuddin, B.A. (2008) "Seismic performance of composite moment-resisting frames", Eng. Struct., 30(7), 1802-1819. https://doi.org/10.1016/j.engstruct.2007.12.004
  7. European Committee for Standardization, EN 1998-1 EUROCODE 8 (2003), Design of structures for earthquake resistance, Part 1. General rules, seismic actions and rules for buildings, Brussels, CEN.
  8. Fajfar, P. (2000), "A nonlinear analysis method for performance-based seismic design", Earthq. Spectra, 16(3), 573-592. https://doi.org/10.1193/1.1586128
  9. Federal Emergency Management Agency (2000), FEMA 356: Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Washington, D.C., November.
  10. Huang, Y., Yi, W. and Nie, J. (2012), "Seismic Analysis of CFST Frames Considering the Effect of the Floor Slab", Steel Compos. Struct., Int. J., 13(4), 397-408. https://doi.org/10.12989/scs.2012.13.4.397
  11. Nie, J. and Tao, M. (2012), "Slab spatial composite effect in composite frame systems, I: Effective width for ultimate loading capacity", Eng. Struct., 38, 171-184. https://doi.org/10.1016/j.engstruct.2011.11.034
  12. Nie, J. and Tao, M. (2012), "Slab spatial composite effect in composite frame systems, II: Equivalent stiffness and verifications", Eng. Struct., 38, 185-199. https://doi.org/10.1016/j.engstruct.2011.11.036
  13. Ozhendekci, D. and Ozhendekci, N. (2008), "Effects of the frame geometry on the weight and inelastic behaviour of eccentrically braced chevron steel frames", J. Construct. Steel Res., 64(3), 326-343. https://doi.org/10.1016/j.jcsr.2007.07.009
  14. Plumier, A. (1990), "New idea for safe structure in seismic zone", Proceedings of IABSE Symposium on Mixed Structures including New Materials, 431-436, Brussels, September.
  15. Prakash, V. and Powell, G. (2012), DRAIN 2DX - computer manual and software, Online at; http://nisee.berkeley.edu/elibrary/getpkg?id=DRAIN2DX .
  16. Ricles, J.M. and Popov, E.P. (1987), Experiments on Eccentrically Braced Frames with Composite Floors, Earthquake Engineering Research Center, University Of California, Berkeley, California.
  17. Romanian Institute of Standardization (2006), P100-1-2006: P100-1 Seismic Design Code, Part I - Design Rules for Buildings, ASRO.
  18. Rossi, P.P. and Lombardo, A. (2007), "Influence of the link overstrength factor on the seismic behaviour of eccentrically braced frames", J. Construct. Steel Res., 63(11), 1529-1545. https://doi.org/10.1016/j.jcsr.2007.01.006
  19. The Regents of the University of California (2012), OpenSees computer code, Online at; http://opensees.berkeley.edu
  20. Vasdravellis, G., Valente, M. and Castiglioni, C.A. (2009), "Dynamic response of composite frames with different shear connection degree", J. Construct. Steel Res., 65(10-11), 2050-2061. https://doi.org/10.1016/j.jcsr.2009.05.001
  21. Zona, A., Barbato, M. and Conte, J. (2008) "Nonlinear seismic response analysis of steel-concrete composite frames", J. Struct. Eng. ASCE, 134(6), 986-997. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:6(986)

피인용 문헌

  1. Modeling composite beams with partial interaction vol.114, 2015, https://doi.org/10.1016/j.jcsr.2015.07.007
  2. A review of research on steel eccentrically braced frames vol.128, 2017, https://doi.org/10.1016/j.jcsr.2016.07.032
  3. Finite Element Analysis of Composite Replaceable Short Links vol.763, pp.1662-9795, 2018, https://doi.org/10.4028/www.scientific.net/KEM.763.576
  4. Influence of Composite Slab on the Nonlinear Response of Extended End-Plate Beam-to-Column Joints vol.763, pp.1662-9795, 2018, https://doi.org/10.4028/www.scientific.net/KEM.763.818