DOI QR코드

DOI QR Code

Stability condition for the evaluation of damage in three-point bending of a laminated composite

  • 투고 : 2012.05.31
  • 심사 : 2013.07.10
  • 발행 : 2013.08.25

초록

The study of the tensile strength of composite materials is far more complex than analysis of the properties of elasticity and plasticity. Indeed, during mechanical loading, micro-cracks in the matrix, the fibers break, debonding of the interfaces are created. The failure process of composites is of great diversity and cannot be described if even we know: the strength criterion of each individual component, the state of stress and strain in the material, the propagation phenomena cracks in the structure and nature of the interface between the matrix and the reinforcement. This information is only partially known and the obtained by the analysis of a stress limit beyond which there is destruction of the material is almost impossible. To partially process the issue, a solution lies in a mesoscopic approach of seeking a law to locate the ultimate strength of the material for a plane stress state. Tests on rectangular plates in bending PEEK/APC2 and T300/914 three were made and this in order to validate our approach, the calculation has been implemented in a nonlinear finite element code (Castem 2000), in order to make comparison with the numerical results. The results show good agreement between numerical simulation and the two materials; however, it would be interesting to consider other phenomena in the criterion.

키워드

참고문헌

  1. Allen, D.H. (2001), "Homogenization principles and their application to continuum damage mechanics", Compos. Sci. Tech., 67(15), 2223-2230.
  2. Altuni ik, A.C., Bayraktar, A., Sevm, B., Kartal, M.E. and Adanur, S. (2010), "Finite element model updating of an arch type steel laboratory bridge model using semi-rigid connection", Steel Compos. Struct. Int. J., 10(6), 541-561. https://doi.org/10.12989/scs.2010.10.6.541
  3. Blassiau, S. (2005), "Modelling of microstructural phenomena in a unidirectional composite carbon / epoxy and lifetime prediction: Characterization and control of wound tanks", Ph.D. Thesis, Ecole des Mines de Paris.
  4. Blassiau, S., Thionet, A. and Bunsell, A.R. (2006), "Micromechanisms of load transfert in a unidirectional carbon-fibre epoxy composite due to fibre failures. part 1 : Micromechanisms and 3d analysis of load transfert, the elastic case", Compos. Struct., 74(3), 303-318. https://doi.org/10.1016/j.compstruct.2005.04.013
  5. Blassiau, S., Thionet, A. and Bunsell, A.R. (2008), "Micromechanisms of load transfert in a unidirectional carbon-fibre epoxy composite due to fibre failures. part 3 : Multiscale reconstruction of composite behaviour", Compos. Struct., 83(3), 312-323. https://doi.org/10.1016/j.compstruct.2007.05.004
  6. Boutaous, A., Peseux, B., Gornet, L. and Belaidi, A. (2006), "A new modeling of plasticity coupled with the damage and identification for carbon fibre composites laminates", Compos. Struct., 74(1), 1-9. https://doi.org/10.1016/j.compstruct.2005.11.004
  7. Chen, S.M., Shi, X.Y. and Qiu, Z.H. (2011), "Shear bond failure in composite slabs- a detailed experimental study", Steel Compos. Struct. Int. J., 11(3), 233-250. https://doi.org/10.12989/scs.2011.11.3.233
  8. Hachemane, B., Mir, A. and Bezzazi, B. (2006) "Elaboration et caracterisation d'un materiaux composites hybride", Materaiux, 13-17, Dijon France.
  9. Herakovich, C.T., Schroedter III, R.D., Gasser, A. and Guitard, L. (2000), "Damage evolution in $[{\pm}45]_s$ laminates with fiber rotation", Compos. Sci. Tech., 60(15), 2781-2789. https://doi.org/10.1016/S0266-3538(00)00091-9
  10. Ladeveze, P., Allix, O., Deu, J.F. and Leveque, D. (2000), "A mesomodel for localisation an damage computation in laminates", Comput. Method. Appl. Mech. Eng., 183(1-2), 105-122. https://doi.org/10.1016/S0045-7825(99)00214-5
  11. Lemaitre, J. (1985), "Coupled elastoplasticity and damage constitutive equations", Comput. Method. Appl. Mech. Eng., 51(1-3), 31-49. https://doi.org/10.1016/0045-7825(85)90026-X
  12. Landis, C.M., Beyerlein, I.J. and McMeeking, R.M. (2000), "Micromechanical simulation of the failure of fiber reinforced composites", J. Mech. Phys. Solid., 48(3), 621-648. https://doi.org/10.1016/S0022-5096(99)00051-4
  13. Mokaddem, A., Alam, M. and Boutaous, A. (2012), "A study by a genetic algorithm for optimizing the arrangement of the fibers on the damage to the fiber-matrix interface of a composite material", J. Text. I., 103(12), 1376-1382. https://doi.org/10.1080/00405000.2012.727587
  14. Phoenix, S.L. and Beyerlein, I.J. (2000), "1.19 - Statistical strength theory for fibrous composite materials", Compr. Compos. Mater., 559-639.
  15. Reese, S. (2003), "Meso-macro modeling of fiber-reinforced rubber-like composites exhibiting large elastoplastic deformation", Int. J. S lid. Struct., 40(4), 951-980. https://doi.org/10.1016/S0020-7683(02)00602-9
  16. Rosen, B.W. (1964), "Tensile failure of fibrous composites", AIAA J., 2(11), 1985-1991. https://doi.org/10.2514/3.2699
  17. Scop, P.M. and Argon, A.S. (1969), "Statistical theory of strength of laminated composites II", J. Compos. Mater., 3(1), 30-47. https://doi.org/10.1177/002199836900300103
  18. Van den Heuvel, P.W.J., Wubbolts, M.K., Young, R.J. and Peijs, T. (1998), "Failure phenomena in two-dimensional multi-fibre model composites: 5. A finite element study", Compos. Part A: Appl. Sci. Manuf., 29(9-10), 1121-1135. https://doi.org/10.1016/S1359-835X(98)00089-X
  19. Yasmin, A., Abot, J.L. and Daniel, I.M. (2003), "Characterization of structure and mechanical behavior of clay/epoxy nanocomposites", Proceedings of the 14th International Conference on Composite Materials, San Diego, CA, USA, July.
  20. Yasmin, A. and Daniel, I.M. (2004), "Mechanical and thermal properties of graphite platelet/epoxy composites", Polymer, 45(24), 8211-8219. https://doi.org/10.1016/j.polymer.2004.09.054
  21. Yasmin, A., Luo, J.J. and Daniel, I.M. (2006), "Processing of expanded graphite reinforced polymer nanocomposites", Compos. Sci. Tech., 66(9), 1182-1189. https://doi.org/10.1016/j.compscitech.2005.10.014

피인용 문헌

  1. A Study of the Effect of Finite Element Meshing in the Modeling of Elastoplastic Degradation of Composite Laminates vol.14, pp.01, 2017, https://doi.org/10.1142/S021987621730001X
  2. The flexural performance of laminated glass beams under elevated temperature vol.52, pp.3, 2014, https://doi.org/10.12989/sem.2014.52.3.603
  3. An experimental study on the flexural performance of laminated glass vol.49, pp.2, 2014, https://doi.org/10.12989/sem.2014.49.2.261