DOI QR코드

DOI QR Code

The effect of process parameters on copper powder particle size and shape produced by electrolysis method

  • Boz, Mustafa (Technical Education Faculty (Metal Education), Karabuk University) ;
  • Hasheminiasari, Masood (Faculty of Engineering (Metallurgical and Materials), Colorado School of Mines)
  • 투고 : 2012.11.22
  • 심사 : 2013.06.07
  • 발행 : 2013.08.25

초록

In this study, an electrolyzing device for the production of metal powders was designed and fabricated. The production of copper powders was performed using a variety of current densities, anode-cathode distances and power removal times. The effect of these parameters on powder particle size and shape was determined. Particle size was measured using a laser diffraction unit while the powder shape was determined by SEM. Experimental results show that an increase in current density leads to a decrease in powder particle size. In addition particle shape changed from globular dendritic to acicular dendritic with increasing the current density. Distance between the cathode and anode also showed a similar influence on powder particle size and shape. An increase in time of powder removal led to an increase in powder particle size, as the shape changed from acicular dendritic to globular dendritic.

키워드

참고문헌

  1. Agrawal, A., Kumari, S. Bagchi, D., Kumar, V. and Pandey, B.D. (2007), "Recovery of copper Powder from copper bleed electrolyte of an Indian copper smelter by electrolysis", Miner. Eng., 20(1), 95-97. https://doi.org/10.1016/j.mineng.2006.05.001
  2. Boz, M. and Kurt, A. (2009) "The effect of time of powder removal on powder particle size and shape copper powder produced by electrolysis method", 4th International Conference on Powder Metallurgy RoPM, Craiova, Romania, July.
  3. Boz, M. and Kurt, A. (2011), "The effect of time of powder removal on powder particle size and shape copper powder produced by electrolysis method", Mater. Sci. Forum, 672, 271-275.
  4. Durisinova, A. (1991), "Factors Influencing quality of electrolytic copper powder", Powder Metallurgy, 34(2), 139-141. https://doi.org/10.1179/pom.1991.34.2.139
  5. German, R.M. (2007), Powder Metallurgy & Particulate Materials Processing, (Translation Editors: Saritas, S., Turker, M. and Durlu, N.), Turkish Powder Metallurgy Association, pp.61- 97.
  6. Incekara, M., Boz, M., Kurt, A. and Gobuluk, M. (2008), "The effect of current density on powder particle size and shape copper powder produced by electrolysis method", 5th International Powder Metallurgy Conference, October 08-12.
  7. Klar, E. (1984), Powder metallurgy, Metals Handbook, (9th Edition), The American Society for Metals, Vol. 7, USA.
  8. Lee, P.W., Eisen, W.B., Ferguson, B.L. German, R.M., Iacocca, R., Madan, D. Anderow, and Hardbound, H. (1998), ASM Metals Handbook Powder Metallurgy, (9th Edition), Vol. 7, ASM International, Ohio, USA.
  9. Lenina, V.I. (1994), "Method and apparatus for copper powder production by electrolysis of sulfate solutions", Russian Agency for Patents and Trademarks, Patent Number: RU 2022717 C1, pp. 1-6.
  10. Markovic, R., Songacilovic, V. and Radisavljevic, L. (2002), "Influence of Cell Geometry on Powder Characteristics", 3, International Powder Metallurgy Conference, Copper Institute Boor, pp. 11-15.
  11. Orhan, G. and Hapci, G. (2010), "Effect of electrolysis parameters on the morphologies of copper powder obtained in a rotating cylinder electrode cell", Powder Technol., DOI:10.1016/j.powtec.2010.03.003.
  12. Pavlovic, M.G., Pavlovic, Lj.J., Ivanovic, E.R., Radmilovic, V. and Popov, K.I. (2001) "The Effect of Particle Structure on Apparent density of Electrolytic Copper Powder", J. Serb. Chem. Soc., 66(11-12), 923-933.
  13. Peissker, E. (1984), "Production and properties of electrolytic copper powder", The Int'l J. Powder Metall., 20(4).
  14. Popov, K.I., Krstic, S.B. and Pavlovic, M.G. (2003), "The critical apparent density for the free flow of copper powder", J. Serbian Chem. Soc., 68(6), 511-513. https://doi.org/10.2298/JSC0306511P
  15. Popov, K.I., Popovic, Lj.J., Ivanovic, E.R., Radmilovic, V.M. and Pavlovic, G (2002), "The Effect of Reversing current deposition on the apparent density of electrolytic copper powder", J. Serb. Chem. Soc., 67(1), 61-67. https://doi.org/10.2298/JSC0201061P
  16. Walker, R. and Duncan, S.J. (1984), "The morphology and properties of electrodeposited copper powder, Surface Technology, 23(4), 301-321. https://doi.org/10.1016/0376-4583(84)90001-3