References
- Park, C. W., Park, C. H., Choi, S. D. and Choi, H. J., 2009, "Analysis of Deformations of Dust-seal in Ball Joint Used for Automobile Part," Proc. of Korean Soc. Precision Eng. 2009 Spring Annual Meeting, pp. 765-766.
- Kim, S. H., Oh, S. T., Lee, C. H., Lee, J. H., Lee, H. W. and Huh, H., 1997, "Finite Element Analysis for 3-D Self-Contact Problems of C. V. Joint Rubber Boots," Trans. Korean Soc. Mech. Eng. A, Vol. 21, No. 12, pp. 2121-2133.
- Kim, S. H., Oh, S. T., Lee, J. H., Lee, H. W. and Huh, H., 1998, "Stress Analysis of C.V. Joint Rubber Boots by Finite Element Method and Application to Design Modification," Trans. KSAE, Vol. 6, No. 3, pp. 123-137.
- Jeong N. J., 2007, A Study of Optimum Geometry for a Rubber Air Spring of Commercial Vehicle Using the Non-linear Finite Element Method, MS Thesis, Inje University.
- Kim, W. D., Woo, C. S. and Han, S., W., 1998, "Finite Element Analysis and Fatigue Life Evaluation of Automotive Rubber Insulator," Elastomer, Vol. 33, No. 3, pp. 168∼176.
- Kim, W. D., Moon, S. I., Woo, C. S. and Cho, I. J., 2011, "Study on Determination of Durability Analysis Process and Fatigue Damage Parameter for Rubber Component," J. Mech. Sci. Tech., Vol. 25, No. 5, pp. 1159-1165. https://doi.org/10.1007/s12206-011-0221-6
- MSC. MARC User's Guide, MSC. Software.
- Kwon, Y. D., Roh, K. T., Ri, C. S. and Hong, S. P., 1999, "A Study on the Convergency of the Finite Element Analysis of Rubber Using Numerical Differentiation Method," Trans. KSAE, Vol. 7, No. 5, pp. 141-153.
- Mark, J. E., Erman, B. and Eirich, F. R., 1994, Science and Technology of Rubber, 2nd Ed., Academic, New York.
- Baek, U. C., Cho, M. H. and Hawong, J. S., 2011, "Material Properties for Reliability Improvement in the FEA Results for Rubber Parts," Trans. Korean Soc. Mech. Eng. A, Vol. 35, No. 11, pp. 1521-1528. https://doi.org/10.3795/KSME-A.2011.35.11.1521
- Kang, T. H., Kim, Y. S. and Kim, I. K., 2005, "An Analysis of Rubber Dust-Cover for Automotive Parts," Trans. Society of CAD/CAM Engineers, Vol. 10, No. 5, pp. 375-379.