참고문헌
- Lee, M., Kim, D., Kim, C., Wenner, M. L., Wagoner, R. H. and Chung, K., 2005, "Spring-Back Evaluation of Automotive Sheets Based on Isotropic-kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Functions, Part II : Characterization of Material Properties," International Journal of Plasticity, Vol. 21, pp. 883-914.
- Miyauchi, K., 1984, "A Proposal of a Planar Simple Shear Test in Sheet Metals," Scientific Papers of the Institute of Physical and Chemical Research, Vol. 78, pp. 27-42.
- An, Y. G., Vegter, H. and Heijne, J., 2009, "Development of Simple Shear Test for the Measurement of Work Hardening," Journal of Materials Processing Technology, Vol. 209, pp. 4248-4254. https://doi.org/10.1016/j.jmatprotec.2008.11.007
- Bouvier, S., Haddadi, H., Levee, P. and Teodosiu, C., 2006, "Simple Shear Tests : Experimental Techniques and Characterization of the Plastic Anisotropy of Rolled Sheets at Large Strains," Journal of Processing Technology, Vol. 172, pp. 96-103. https://doi.org/10.1016/j.jmatprotec.2005.09.003
- Levee, P. and Monteil, G., 1999, Optimisation de Mesure de Cisaillement en Grandes Deformations, LPMTM Report.
- Vladimirov, I. N., Pietryga, M. P. and Reese, S., 2009, "Prediction of Springback in Sheet Forming by a New Finite Strain Model with Nonlinear Kinematic and Isotropic Hardening," Journal of Materials Processing Technology, Vol. 209, pp. 4062-4075. https://doi.org/10.1016/j.jmatprotec.2008.09.027
- Eggertsen, P. A. and Mattiasson, K., 2010, "On Constitutive Modeling for Springback Analysis," International Journal of Mechanical Sciences, Vol. 52, pp. 804-818. https://doi.org/10.1016/j.ijmecsci.2010.01.008
- Yoshida, F., Uemori, T. and Fujiwara, K., 2002, "Elastic-plastic Behavior of Steel Sheets under Inplane Cyclic Tension-Compression at Large Strain," International Journal of Plasticity, Vol. 18, pp. 633-659. https://doi.org/10.1016/S0749-6419(01)00049-3
- Yoshida, F. and Uemori, T., 2003, "A Model of Large-Strain Cyclic Plasticity and Its Application to Springback Simulation," International Journal of Mechanical Sciences, Vol. 45, pp. 1687-1702. https://doi.org/10.1016/j.ijmecsci.2003.10.013
- Vincze, G. T., 2007, Investigation Methodologies for Metals Used in Forming Processes, Ph. D. Dissertation, University of Aveiro, Aveiro, Portugal
- Hyun, H. C., Kim, M., Kim, D. and Lee, H., 2013, "On Acquiring True Stress-strain Curves of a Sheet Specimen using Tensile Test and FE Analysis Based on a Local Necking Criterion," Journal of Materials Research, submitted
- Prager, W., 1956, "A New Method of Analyzing Stresses and Strains in Work-hardening Plastic Solids," Journal of Applied Mechanics, Vol. 23, 493-496.
- Ziegler, H., 1958, "A Modification of Prager' s Hardening Rule," Quarterly of Applied Mathe-matics, Vol. 17, pp. 55-65.
- Frederick, C. O. and Armstrong, P. J., 2007, "A Mathematical Representation of the Multiaxial Bauschinger Effect," Materials at high tempera-tures, Vol. 24, pp.1-26. https://doi.org/10.3184/096034007X207589
- Chaboche, J. L., 2008, "A Review of Some Plasticity and Viscoplasticity Constitutive Theories," International Journal of Plasticity, Vol. 24, pp. 1642-1693. https://doi.org/10.1016/j.ijplas.2008.03.009
- ABAQUS User's Manual, Version 6.11, 2012, Dassault Systemes Simulia Corp., Providence, RI, USA.
피인용 문헌
- Spring-back Prediction of DP980 Steel Sheet Using a Yield Function with a Hardening Model vol.25, pp.3, 2016, https://doi.org/10.5228/KSTP.2016.25.3.189