International Journal of Naval Architecture and Ocean Engineering

  • 제5권3호
  • /
  • Pages.348-363
  • /
  • 2013
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel PART I : Proposal of a heat source model

  • Kim, Jae Woong (Gas Technology R&D Group, Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Jang, Beom Seon (RIMSE, Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Kim, Yong Tai (Gas Technology R&D Group, Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Chun, Kwang San (Welding engineering R&D Group, Daewoo Shipbuilding & Marine Engineering Co., Ltd.)
  • 발행 : 2013.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power $CO_2$ laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.

키워드

참고문헌

  1. Arata, Y., Maruo, H., Miyamoto, I. and Takeuchi, S., 1976. Dynamic behavior of laser welding and cutting. Proceedings of the Seventh International Conference on Electron and Ion Beam Science and Technology. Washington, DC, 4-7 May 1976, pp.111-128.
  2. Bardin, F., Cobo, A., Lopez-Higuera, J.M., Collin, O., Aubry, P., Dubois, T., Hogstrom, M., Nylen, P., Jonsson, P., JonesJulian, D.C. and Hand, D.P., 2005. Optical techniques for real-time penetration monitoring for laser welding. AppliedOptics, 44(19), pp.3869-3876.
  3. Cho, J.H. and Na, S.J., 2006. Implementation of real-time multiple reflection and Fresnel absorption of laser beam inkeyhole. Journal of Physics D: Applied Physics, 39(24), pp.5372-5378. https://doi.org/10.1088/0022-3727/39/24/039
  4. Ha, Y.S., 2006. An improved inherent strain analysis for plate bending by line heating considering phase transformation ofsteel. Ph.D. Seoul National University.
  5. Jin, X., Li, L. and Zhang, Y., 2002. A study on Fresnel absorption and reflections in the keyhole in deep penetration laserwelding. Journal of Physics D: Applied Physics, 35(18), pp.2304-2310. https://doi.org/10.1088/0022-3727/35/18/312
  6. Lee, J.Y., Lee, W.B. and Yoo, C.D., 2005. Heat source modeling of laser keyhole welding: Part 1-bead welding. Journal ofthe Korean Welding and Joining Society, 23(1), pp.48-54.
  7. Mazumder, J. and Steen, W.M., 1980. Heat transfer model for CW laser material processing. Journal of Applied Physics,51(2), pp.941-947. https://doi.org/10.1063/1.327672
  8. Pablo, S. and Guillermo, N., 1997. A study of the effect of multiple reflections on the shape of the keyhole in the laserprocessing of materials. Journal of Physics D: Applied Physics, 30(23), pp.3216-3222. https://doi.org/10.1088/0022-3727/30/23/006
  9. Rosental, D., 1941. Mathematical theory of heat distribution during welding and cutting. Welding Journal, 20(5), pp.220-234.
  10. Swift-Hook, D.T. and Gick, A.E.F., 1973. Penetration welding with lasers-Analytical study indicates that present laser beam welding capabilities may be extended tenfold. Welding Journal, 52(11), pp.492-499.
  11. Zacharia, T., David, S.A., Vitek, J.M. and Debroy, T., 1989. Weld pool development during GTA and laser beam welding of Type 304 stainless steel; Part 1-theoretical analysis. Welding Journal, 68(12), pp.499-509.