Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Design of Expected Loss Control Chart Considering Economic Loss

경제적 손실을 고려한 기대손실 관리도의 설계

  • Kim, Dong-Hyuk (Department of Industrial Management Engineering, Incheon National University) ;
  • Chung, Young-Bae (Department of Industrial Management Engineering, Incheon National University)
  • 김동혁 (인천대학교 산업경영공학과) ;
  • 정영배 (인천대학교 산업경영공학과)
  • Received : 2013.06.05
  • Accepted : 2013.06.25
  • Published : 2013.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Control chart is representative tool of Statistical Process Control (SPC). But, it is not given information about the economic loss that occurs when a product is produced characteristic value does not match the target value of the process. In order to manage the process, we should consider not only stability of the variation also produce products with a high degree of matching the target value that is most ideal quality characteristics. There is a need for process control in consideration of economic loss. In this paper, we design a new control chart using the quadratic loss function of Taguchi. And we demonstrate effectiveness of new control chart by compare its ARL with ${\overline{x}}-R$ control chart.

Keywords

References

  1. Chung, Y.B. and Yeom, G.C., Statistical Quality Control, Seongandang, 2010.
  2. Mun, H.J. and Chung, Y.B., A Study on The Bivariate Process Capability Index using Quality Loss Function. Korea Industrial and System Engineering fall conference, 2001, p 329-342.
  3. Kim, P.K. and Cho, J.J., Some Process Capability Indices Using Loss Function Under Contaminated Normal Process. Journal of The Korean Society for Quality Management, 1998, Vol. 26, No. 4, p 65-78.
  4. Chung, Y.B., A Multivariate Process Capability Index using Expected Loss. Journal of the Society of Korea Industrial and Systems Engineering, 2005, Vol. 28, No. 4, p 116-123.
  5. Chung, Y.B. and Kim, Y.S., A Study on The Process Capability Index using Loss Function. Journal of the Korean Institute of Plant Engineering, 2011, Vol. 16, No. 3, p 99-106.
  6. Park, S.H., Design of Experiment(revised ed), Seoul : MinYoungSa, 2009.
  7. Ree, S.B., Analysis of Quality Loss Function(QLF) of Taguchi. Journal of The Korean Society for Quality Management, 1997, Vol. 25, No. 3, p 119-130.

Cited by

  1. 경제적 손실을 고려한 기대손실 능력지수의 개발 vol.36, pp.4, 2013, https://doi.org/10.11627/jkise.2013.36.4.109
  2. 위치모수를 이용한 로버스트 $\bar{x}$ 관리도의 설계 vol.37, pp.1, 2013, https://doi.org/10.11627/jkise.2014.37.1.151
  3. 로버스트 추정에 근거한 수정된 ${\bar{x}}$-s 관리도의 설계 vol.38, pp.1, 2015, https://doi.org/10.11627/jkise.2014.38.1.15
  4. 역정규 손실함수를 이용한 기대손실 관리도의 개발 vol.39, pp.2, 2013, https://doi.org/10.11627/jkise.2016.39.2.037
  5. 로버스트 기대손실 관리도의 설계 vol.39, pp.3, 2013, https://doi.org/10.11627/jkise.2016.39.3.010
  6. 역정규 손실함수를 이용한 기대손실 능력지수의 개발 vol.40, pp.1, 2017, https://doi.org/10.11627/jkise.2017.40.1.041
  7. 손실함수의 형태를 고려한 생산자 규격한계의 결정 vol.41, pp.3, 2013, https://doi.org/10.11627/jkise.2018.41.3.145