동력기계공학회지 (Journal of Power System Engineering)

  • 제17권4호
  • /
  • Pages.103-108
  • /
  • 2013
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

Mod. 440A 마르텐사이트 스테인리스강의 미세조직과 기계적 성질에 미치는 오스테나이트화 처리의 영향

Effect of Solution Annealing on the Microstructure and Mechanical Properties of Modified 440A Martensitic Stainless Steel

  • Kim, Young-Chul (Department of Metallurgical Engineering, Pukyong National University) ;
  • Kwon, Soon-Doo (Department of Metallurgical Engineering, Pukyong National University) ;
  • Jung, Byong-Ho (Department of Metallurgical Engineering, Pukyong National University) ;
  • Kang, Chang-Yong (Department of Metallurgical Engineering, Pukyong National University)
  • 투고 : 2013.04.12
  • 심사 : 2013.06.10
  • 발행 : 2013.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was investigated the effect of austenitizing treatment the microstructure and mechanical properties in modified 440A steel, and the results were as follows. The amount of remaining carbide decreases with increasing the austenitizing treatment temperature, and all carbide is completely dissolved at $1250^{\circ}C$. The amount of remaining carbide decreases with increasing the austenitizing treatment time, but the carbide remains insoluble up to 120 minutes at $1050^{\circ}C$. The strength and hardness gradually decrease with increasing the austenitizing treatment temperature and is significantly lower at $1250^{\circ}C$, while the elongation and the impact value rapidly increase. The strength and hardness rapidly decrease, the elongation and impact value rapidly insrease with increasing the austenitizing treatment time and exhibit no change at above 120 minutes. The austenitizing treatment modified 440A steel is required for temperature of above $1050^{\circ}C$ and time of above 60 minutes.

키워드

참고문헌

  1. M. Hasegawa, 1992, "Handbook of stainless steel (Ⅲ practical materials)", Sewa, Seoul, pp. 369-402.
  2. T. Zinkai, 1989, "Usage of stainless steels", part of speciality steel, pp. 158-1597.
  3. Y. J. Kim, D. W. Joo, S. H. Park, G. D. Kim and J. H. Sung, 1994, "Influence of Austenitizing Condition on the Mechanical Properties in 420J1 Martensitic Stainless Steel", J. of the Korean Society for heat Treatment, Vol. 7, No. 1, pp. 25-34.
  4. J. H. G. Monypenny, 1954, "Stainless Iron Streel", Vol. 2, pp. 33.
  5. Y. C. Kim, B. H. Jung and C. Y. Kang, 2011, "The Effect of Alloying Elements and Heat Treatment on the Intergranual Corrosion of 440A Martensitic Stainless Steel", J. of the Korean Society for Power System Engineering, Vol. 15, No. 3, pp. 52-57. https://doi.org/10.9726/kspse.2011.15.3.052
  6. Y. C. Kim, C. Y. Kang and B. H. Jung, 2011, "The Effect of Alloying Elements and Heat Treatment on the Uniform Corrosion of 440A Martensitic Stainless Steel", J. of the Korean Society for Power System Engineering, Vol. 15, No. 4, pp. 42-48.
  7. K. Fujita, 1970, "Heat treatment of stainless steels", Nikkan Kogyo Shimbun, Ltd., pp. 19-78.
  8. Y. S. Park, 1995, "Effect of austenitizion on the microstructure and mechanical properties in 420 J2 stainless steel", Pukyong national university, master's thesis, pp. 7-54.
  9. Allegheny Ludlum Corporation, 1998, "Technical Data Blue Sheet, Martensitic Stainless Steels Type 410, 420, 425Mod, and 440A, Pittsburgh, PA, pp. 1-8.