참고문헌
- Binnig, G., Quate, C. F., and Gerber, C., "Atomic Force Microscope", Phys Rev Lett, Vol. 56, pp. 930- 933, 1986. https://doi.org/10.1103/PhysRevLett.56.930
- Mahaffy, R. E., Shih, C. K., MacKintosh, F. C., and Käs, J., "Scanning Probe-Based Frequency-Dependent Microrheology of Polymer Gels and Biological Cells", Phys Rev Lett, Vol. 85, pp. 880-883, 2000. https://doi.org/10.1103/PhysRevLett.85.880
- Chung, K. H., Bhadriraju, K., Spurlin, T. A., Cook, R. F., and Plant, A. L., "Nanomechanical Properties of Thin Films of Type I Collagen Fibrils", Langmuir, Vol. 26, pp. 3629-3636, 2010. https://doi.org/10.1021/la903073v
- Stan, G., Ciobanu, C. V., Parthangal, P. M., and Cook, R. F., "Diameter-Dependent Radial and Tangential Elastic Moduli of ZnO Nanowires", Nano Lett., Vol. 7, pp. 3691-3697, 2007. https://doi.org/10.1021/nl071986e
- Hutter, J. L. and Bechhoefer, J., "Calibration of Atomic-Force Microscope Tips", Rev. Sci. Instrum., Vol. 64, pp. 1868-1873, 1993. https://doi.org/10.1063/1.1143970
- Torii, A., Sasaki, M., Hane, K., and Okuma, S., "A Method for Determining the Spring Constant of Cantilevers for Atomic Force Microscopy", Meas Sci Technol, Vol. 7, pp. 179-184, 1996. https://doi.org/10.1088/0957-0233/7/2/010
- Gates, R. S. and Reitsma, M. G., "Precise Atomic Force Microscope Cantilever Spring Constant Calibration using a Reference Cantilever Array", Rev. Sci. Instrum., Vol. 78, pp. 086101, 2007. https://doi.org/10.1063/1.2764372
- Sader, J. E., Chon, J. W. M., and Mulvaney, P., "Calibration of Rectangular Atomic Force Microscope Cantilevers", Rev. Sci. Instrum., Vol. 70, pp. 3967- 3969, 1999. https://doi.org/10.1063/1.1150021
- Green, C. P., Lioe, H., Cleveland, J. P., Proksch, R., Mulvaney, P., and Sader, J. E., "Normal and Torsional Spring Constants of Atomic Force Microscope Cantilevers", Rev. Sci. Instrum., Vol. 75, pp. 1988- 1996, 2004. https://doi.org/10.1063/1.1753100
- Ravi, T. S., Marcus, R. B., and Liu, D., "Oxidation Sharpening of Silicon Tips", J. Vac. Sci. Technol. B, Vol. 9, pp. 2733-2737, 1991. https://doi.org/10.1116/1.585680
- Folch, A., Wrighton, M. S., and Schmidt, M. A., "Microfabrication of Oxidation-Sharpened Silicon Tips on Silicon Nitride Cantilevers for Atomic Force Microscopy", Microelectromechanical Systems, Journal Of, Vol. 6, pp. 303-306, 1997. https://doi.org/10.1109/84.650126
- Ducker, W. A., Senden, T. J., and Pashley, R. M., "Direct Measurement of Colloidal Forces using an Atomic Force Microscope", Nature, Vol. 353, pp. 239-241, 1991. https://doi.org/10.1038/353239a0
- Chung, K. H., Pratt, J. R., and Reitsma, M. G., "Lateral Force Calibration: Accurate Procedures for Colloidal Probe Friction Measurements in Atomic Force Microscopy", Langmuir, Vol. 26, pp. 1386-1394, 2010. https://doi.org/10.1021/la902488r
- Chung, K. H., Shaw, G. A., and Pratt, J. R., "Accurate Noncontact Calibration of Colloidal Probe Sensitivities in Atomic Force Microscopy", Rev. Sci. Instrum., Vol. 80, pp. 065107, 2009. https://doi.org/10.1063/1.3152335
- Sader, J. E. and Green, C. P., "In-Plane Deformation of Cantilever Plates with Applications to Lateral Force Microscopy", Rev. Sci. Instrum., Vol. 75, pp. 878-883, 2004. https://doi.org/10.1063/1.1667252
- Craig, V. S. J. and Neto, C., "In Situ Calibration of Colloid Probe Cantilevers in Force Microscopy: Hydrodynamic Drag on a Sphere Approaching a Wall", Langmuir, Vol. 17, pp. 6018-6022, 2001. https://doi.org/10.1021/la010424m
- Ryu, S. and Franck, C., "In Situ Hydrodynamic Lateral Force Calibration of AFM Colloidal Probes", Langmuir, Vol. 27, pp. 13390-13399, 2011. https://doi.org/10.1021/la201033e
- John R. Taylor. An Introduction Error Analysis: The Study of Uncertainties in Physical Measurements. Sausalito, Caifornia: University Science Books, 1996.
- Johnson KL. Contact Mechanics. : Cambridge University Press, 1985.
- Carpick, R. W., Ogletree, D. F., and Salmeron, M., "Lateral Stiffness: A New Nanomechanical Measurement for the Determination of Shear Strengths with Friction Force Microscopy", Appl. Phys. Lett., Vol. 70, pp. 1548-1550, 1997. https://doi.org/10.1063/1.118639