DOI QR코드

DOI QR Code

The Maximum Efficiency Driving in IPMSM by Precise Estimation of Current Phase Angle

  • Cho, Gyu-Won (Dept. of Electrical Engineering, Changwon National University) ;
  • Kim, Cheol-Min (Dept. of Electrical Engineering, Changwon National University) ;
  • Kim, Gyu-Tak (Dept. of Electrical Engineering, Changwon National University)
  • Received : 2013.05.27
  • Accepted : 2013.06.07
  • Published : 2013.09.01

Abstract

In this paper, the equivalent circuit for the efficiency calculation by precise estimation of the linkage flux, inductance and iron loss resistance was calculated accurately. In addition, the driving characteristics according to the current phase angle are analyzed and the maximum efficiency point is calculated. And then, analyzed and experimental values of the efficiency were compared. So, causes of error were expected to be vibration and noise by harmonic distortion of the voltage and current, and mechanical loss of dynamometer. In addition, the driving characteristics according to the current phase angle are analyzed and the maximum efficiency point is calculated.

Keywords

References

  1. M. A. Rahman, P. Zhou, "Analysis of Brushless Permanent Magnet Synchronous Motors?", IEEE Trans on. Industrial Electronics, Vol. 43, No. 2, 1996, pp. 256-267. https://doi.org/10.1109/41.491349
  2. S. Morimoto, Y. Tong, Y. Takeda, T. Hirasa "Loss Minimization Control of Permanenet Magnet Synchronous Motor Drives," IEEE Trans on Ind. Appl., Vol. 41, No. 5, PP. 511-517, 1994.
  3. Rahman, K. M, Hiti, S. "Identification of machine parameters of a synchronous motor," IEEE Trans on Ind. Appl., Vol. 41, No. 2, pp. 557-565, 2005. https://doi.org/10.1109/TIA.2005.844379
  4. G. W. Cho, J.O. Jo, S. H. Woo, K. B. Jang, G. T. Kim, "The inductance computation of IPMSM using Direct-current diminution test", Trans on KIEE., Vol. 61, No. 2, pp. 209-215, Feb, 2012. https://doi.org/10.5370/KIEE.2012.61.2.209
  5. Jianyi Chen, Chemmangot V. nayar and Longya Xu, "Design and Finite-Element Analysis of an Outer-Rotor Permanenet-Magnet Generator for Directly Coupled Wind Tubines," IEEE Trans. on Magn., Vol. 36, No. 5, pp. 3802-3809, Sept, 2000. https://doi.org/10.1109/20.908378
  6. H. Nam, K. H. HA, J. J. Lee and J. P. Hong, "A Study on Iron Loss Analysis Method Considering the Harmonics of Flux Density Waveform using Iron Loss Curves Tested on Epstein Sample," IEEE Trans. on Magn., Vol. 39, No. 3, pp. 1472-1475, 2003. https://doi.org/10.1109/TMAG.2003.810198
  7. Y. Chen, P. Pillay, "An Improved formula for lamination core loss calculations in machines operating with high frequency and high flux density excitation" Industry Application conference., Vol. 2, pp. 13-18, 2002.
  8. G. W. Cho, S. H. Ji, K. W. Park, K. B. Jang, G. T. Kim, "The optimization of rotor shape for constant torque improvement and radial magnetic force minimization", Trans on KIEE., Vol. 31, No. 1, Jan, 2012
  9. B. H. Kang, Y. T. Kim, G. W. Cho, J. G. Lee, K. B. Jang, G. T. Kim, "Estimation iron loss coefficients and iron loss calculation of IPMSM according to core material", Trans on KIEE., Vol. 61, No. 9, pp. 1269-1247, 2012 https://doi.org/10.5370/KIEE.2012.61.9.1269
  10. T. J. E. Miller, "Brushless Permanent-Magnet and Reluctance Motor Drives", Clarendon Press.Oxford, pp. 11-19, 1989.
  11. H. Domeki et al., "Investigation of benchmark model for estimating iron loss in rotating machine," IEEE Trans. on Magnetics., Vol. 40, No. 2, pp. 794-797, 2004. https://doi.org/10.1109/TMAG.2004.825442